Effect of through-plane polytetrafluoroethylene distribution in gas diffusion layers on performance of proton exchange membrane fuel cells
Source abstract
Abstract
Abstract This experimental study identifies the effect of through-plane polytetrafluoroethylene (PTFE) distribution in gas diffusion backing (GDB) on the performance of proton exchange membrane fuel cells (PEMFC). PTFE-drying under vacuum pressure created a relatively uniform PTFE distribution in GDB compared to drying under atmospheric pressure. Carbon paper samples with different PTFE distributions due to the difference in drying conditions were prepared and used for the cathode gas diffusion layer (GDL) of PEMFCs. Also investigated is the effect of MPL application on the performance for those samples. The current density (i) – voltage (V) characteristics of these PEMFCs measured under high relative humidity conditions clearly showed that, with or without MPL, the cell using the GDL with PTFE dried under vacuum condition showed better performance than that dried under atmospheric condition. It is suggested that this improved performance is caused by the efficient transport of liquid water through the GDB due to the uniform distribution of PTFE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Gas diffusion layer for proton exchange membrane fuel cells – a review10.1016/j.jpowsour.2009.04.005 ↗
2. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
3. http://newsroom.toyota.co.jp/en/detail/4198334 (Toyota, page retrieved on November 2015).
4. In situ water distribution measurements in a polymer electrolyte fuel cell10.1016/S0378-7753(03)00617-7 ↗
5. Simultaneous measurements of species and current distributions in a PEFC under low humidity operation10.1149/1.1864492 ↗
6. Diffusion media materials and characterization
7. Influence of the hydrophobic material content in the gas diffusion electrodes on the performance of a PEM fuel cell10.1016/S0360-3199(02)00143-X ↗
8. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell10.1016/j.electacta.2004.04.009 ↗
9. Effects of PTFE contents in the gas diffusion media on the performance of PEMFC10.1016/j.jpowsour.2003.12.037 ↗
10. Effect of thickness and hydrophobic polymer content of the gas diffusion layer on electrode flooding level in a PEMFC10.1149/1.2006487 ↗
11. Characterization of water transport in gas diffusion media10.1016/j.jpowsour.2008.07.093 ↗
12. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs10.1149/1.3594578 ↗
13. Heterogeneous through-plane distributions of polytetrafluoroethylene in polymer electrolyte membrane fuel cells gas diffusion layers10.1016/j.jpowsour.2011.11.005 ↗
14. Effect of spatial variation of gas diffusion layer wetting characteristics on through-plane water distribution in a polymer electrolyte fuel cell10.1016/j.jpowsour.2012.03.058 ↗
15. Effect of through-plane distribution of polytetrafluoroethylene in carbon paper on in-plane gas permeability10.1016/j.jpowsour.2013.10.009 ↗
16. Improvement of water management by a microporous sublayer for PEM fuel cells10.1016/S0378-7753(02)00058-7 ↗
17. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
18. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
19. Effects of microporous layers in polymer electrolyte fuel cells10.1149/1.1861194 ↗
20. A bi-functional micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.jpowsour.2006.06.064 ↗
21. On the role of the microporous layer in PEMFC operation10.1016/j.elecom.2008.12.053 ↗
22. Effect of diffusion-layer on the performance of polymer electrolyte fuel cells operating at atmospheric pressure10.1023/A:1004088402496 ↗
23. Micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.electacta.2006.01.048 ↗
24. Improving the performance of a PEMFC with Ketjenblack WC-600JD carbon black as the material of the microporous layer10.1149/1.1904504 ↗
25. Effect of carbon loading in microporous layer on PEM fuel cell performance10.1016/j.jpowsour.2006.09.020 ↗
26. Effect of PTFE content in microporous layer on water management in PEM fuel cells10.1016/j.jpowsour.2007.11.055 ↗
27. Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation10.1016/j.jpowsour.2008.04.031 ↗
28. Investigation of macro- and micro-porous layer interaction in polymer electrolyte fuel cells10.1016/j.ijhydene.2008.03.053 ↗
29. Synchrotron investigation of microporous layer thickness on liquid water distribution in a PEM fuel cell10.1149/2.0221507jes ↗
30. Water flow in the gas diffusion layer of PEM fuel cells10.1016/j.memsci.2005.03.049 ↗
31. Direct measurement of the capillary pressure characteristics of water-air-gas diffusion layer system for PEM fuel cells10.1016/j.elecom.2008.08.008 ↗
32. Water management studies in PEM fuel cells, part III: dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs10.1016/j.ijhydene.2010.01.012 ↗
33. Liquid-water interactions with gas-diffusion-layer surfaces10.1149/2.0321412jes ↗
34. Liquid water breakthrough pressure through gas diffusion layer of proton exchange membrane fuel cell10.1016/j.ijhydene.2014.03.238 ↗
35. Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode10.1016/j.jpowsour.2011.10.002 ↗
36. An innovative technique for pore structure analysis of fuel cell and battery components using flow porometry10.1016/S0378-7753(00)00684-4 ↗
37. American Society for Testing · 1970 · 722
38. Unstructured pore network modeling with heterogeneous PEMFC GDL porosity distributions10.1149/1.3486095 ↗