Thermal runaway in valve-regulated lead-acid cells and the effect of separator structure
Source abstract
Abstract
Abstract Thermal runaway is normally defined as the increase in charge or float current that occurs as a result of the increase in cell temperature from the initial applied constant potential. If left unchecked, the currents can reach high values and, ultimately, lead to the destruction of the cell. This definition does not explain why all cells floated at constant potential do not suffer from thermal runaway. The aim of this paper was to investigate and explain the cause of this transition from normal stable behaviour to unstable thermal runaway. A series of 6 V, 100 A h, valve-regulated lead-acid (VRLA) batteries were overcharged at potentials of up to 2.65 V per cell and the currents, temperatures and gas-evolution rates measured during thermal runaway. From these results, it was concluded that separator dry-out was the critical parameter that controls thermal runaway behaviour. This conclusion was reinforced by other data for the effect of saturation on the resistance, the normal float behaviour and the gas transport in VRLA separators. A model of the structure of partially saturated separators was developed to explain the observed behaviour, and was used to predict possible improvements in separator structure to increase resistance to runaway.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. D.O. Feder, in: Proceedings of the Intelec’95, pp. 22−27.
2. Culpin · J. Power Sour. · 1991 · 36 · 41510.1016/0378-7753(91)80069-A ↗
3. W.T. Rutledge, R.J. Bowers, in: Proceedings of the Intelec’94, pp. 168−171.
4. D. McMenamin, in: Proceedings of the Intelec’92, pp. 18−21.
5. D. Berndt, Maintenance Free Batteries, 1st ed., Wiley, New York, 1993, pp. 306−310.
6. H.D. Thacker, in: Proceedings of the Intelec’92, pp. 47−50.
7. S. Torigoe, K. Matsumoto, K. Maki, T. Tanako, T. Babaski, in: Proceedings of the Intelec’94, pp. 54−58.
8. B. Culpin, J. Hayman, in: L.J. Pearce (Ed.), Power Sources 11, Research and Development in Non-mechanical Electrical Power Sources, International Power Sources Symposium Committee, Leatherhead, England, 1986, pp. 45−66.
9. A.L. Ferreira, in: Proceedings of the Sixth European Lead-acid Battery Conference, Prague, Czechoslovakia, 1998.
10. Culpin · J. Power Sour. · 1995 · 53 · 12710.1016/0378-7753(94)01982-2 ↗
11. Ball · J. Power Sour. · 2002 · 104 · 20810.1016/S0378-7753(01)00925-9 ↗