journal article·2015-12Open access

Quality control tool of electrode coating for lithium-ion batteries based on X-ray radiography

A. Etiemble, N. Besnard, J. Adrien, P. Tran-Van, L. Gautier, B. Lestriez, E. Maire

Abstract

A simple and efficient method, based on X-ray radiography, is developed to check the quality (homogeneity of the thickness, presence of defects) of NMC-, LFP-and NMC/LFPbased electrode coating for Li-ion batteries at the scale of several cm 2 with a resolution of 20µm. As a first step, the attenuation coefficient of NMC-and LFP-based coating is experimentally determined according to the Beer-Lambert law. Then, the attenuation coefficient of each active material is estimated from these experimental results and X-ray attenuation databases, which allows establishing an attenuation law for any coating composition. Finally, thanks to this relationship, the thickness can be evaluated in each spot of the film and the defects, such as pinholes or broad edges with gradual decrease of the thickness coating, can be detected. The analysis of NMC-, LFP-and NMC/LFP-based electrodes shows that the coating quality decreases as coating thickness increases and as the nanometric vs. micrometric material content increases in the coating composition. This reveals detrimental aspects of nanomaterials with respect to their use in composite electrode manufactured through conventional slot-die or casting process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Electron and X-Ray Spectroscopy Techniques · Advanced X-ray and CT Imaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Production of large-area lithium-ion cells – preconditioning, cell stacking and quality assurance10.1016/j.cirp.2012.03.101 ↗
2. Automated optical detection of particles and defects on a Li-ion-cell surface using a single-point analysis
3. Research and demonstration center for the production of large-area lithium-ion cells
4. Modelling the impact of variations in electrode manufacturing in lithium-ion battery modules10.1016/j.jpowsour.2012.03.065 ↗
5. Rheological properties and stability of NMP based cathode slurries for lithium ion batteries10.1016/j.ceramint.2013.08.137 ↗
6. Evaluation of slurry characteristics for rechargeable lithium-ion batteries10.1016/j.materresbull.2013.04.026 ↗
7. Effect of mixing sequences on the electrode characteristics of lithium-ion rechargeable batteries10.1016/S0378-7753(99)00281-5 ↗
8. Design of aqueous processed thick LiFePO4 composite electrodes for high-energy lithium battery10.1149/1.3046129 ↗
9. Charge/discharge efficiency improvement by the incorporation of conductive carbons in the carbon anode of Li-ion batteries10.1016/S0378-7753(00)00446-8 ↗
10. The effect of microstructure on the galvanostatic discharge of graphite anode electrodes in LiCoO2-based rocking-chair rechargeable batteries10.1149/1.3216000 ↗
11. Infrared particle detection for battery electrode foils10.1016/j.infrared.2013.08.017 ↗
12. Non-destructive evaluation of slot-die-coated lithium secondary battery electrode by in-line laser caliper and IR thermography methods10.1039/C3AY41140K ↗
13. Raman microscopy as a quality control tool for electrodes of lithium-ion batteries10.1016/S0378-7753(01)00679-6 ↗
14. X-ray based methods for non-destructive testing and material characterization10.1016/j.nima.2008.03.016 ↗
15. Multiscale electronic transport in Li1+xNi1/3-uCo1/3-vMn1/3-wO2: a broadband dielectric study from 40 Hz to 10 GHz10.1039/c3cp52384e ↗
16. Cathode performance as a function of inactive material and void fractions10.1149/1.3459878 ↗
17. Multiscale electronic transport mechanism and true conductivities in amorphous carbon-LiFePO4 nanocomposites10.1039/C2JM13429B ↗
18. A review of blended cathode materials for use in Li-ion batteries10.1016/j.jpowsour.2013.09.052 ↗
19. In situ experiments with X ray tomography: an attractive tool for experimental mechanics10.1007/s11340-010-9333-7 ↗
20. On the application of X-ray microtomography in the field of materials science10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
21. NIST X-ray attenuation Databases, http://physics.nist.gov/PhysRefData/Xcom/html/xcom1-t.html.
22. Slot-die processing of lithium-ion battery electrodes – coating window characterization10.1016/j.cep.2012.10.011 ↗