journal article·2015-09

Enhancing electrochemical properties of silicon-graphite anodes by the introduction of cobalt for lithium-ion batteries

Jing Zhang, Yunhui Liang, Qian Zhou, Yi Peng, Huabin Yang

Publisher page

Abstract

Abstract A Si–Co–C composite material has been prepared by a simple high energy mechanical milling process (HEMM). The crystal structures and morphologies of the samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), indicating that silicon and cobalt elements uniformly distribute in graphite sheets. Electrochemical tests show that the initial discharge and charge capacities of the Si20Co10C70 composite are 1283.3 mAh g−1 and 1068.8 mAh g−1, respectively, with an initial coulombic efficiency of 83.3%. It maintains a reversible capacity of 620 mAh g−1 after 25 cycles and remains stable above 610 mAh g−1 after 50 cycles. The results of cyclic voltammetry (CV) prove that cobalt acts as an inactive matrix, and the result of electrochemical impedance spectroscopy (EIS) reveals that the polarization resistance (Rp) decreases after the Co addition. It is believed that uniform dispersed cobalt nanoparticles relieve the destruction of the graphite. Furthermore, the existence of carbon and cobalt not only restrains the agglomeration of Si particles, but also suppresses the volume expansion of Si. This extraordinary microstructure is believed to be responsible for the excellent electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Commercial carbonaceous materials as lithium intercalation anodes10.1149/1.2049977 ↗
2. Phase structure changes of MnP anode material during electrochemical lithiation and delithiation process10.1016/j.electacta.2013.02.057 ↗
3. Challenges for rechargeable batteries10.1016/j.jpowsour.2010.11.074 ↗
4. Study of lithium insertion in hard carbon made from cotton wool10.1016/S0378-7753(98)00148-7 ↗
5. Carbon materials for lithium-ion rechargeable batteries10.1016/S0008-6223(98)00290-5 ↗
6. Characterization of silicon- and carbon-based composite anodes for lithium-ion batteries10.1016/j.electacta.2006.11.006 ↗
7. Amorphous silicon as a possible anode material for Li-ion batteries10.1016/S0378-7753(99)00194-9 ↗
8. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
9. Thermodynamic properties of the lithium-silicon system10.1149/1.2132692 ↗
10. Lithium alloy negative electrodes10.1016/S0378-7753(99)00124-X ↗
11. Structured silicon anodes for lithium battery applications10.1149/1.1563094 ↗
12. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
13. Evaluation of the electrochemical characteristics of silicon/lithium titanate composite as anode material for lithium ion batteries10.1016/j.electacta.2014.12.153 ↗
14. Si-graphite composites as anode materials for lithium secondary batteries10.1016/j.jpowsour.2010.03.008 ↗
15. Si–Al thin film anode material with superior cycle performance and rate capability for lithium ion batteries10.1016/j.electacta.2008.06.025 ↗
16. Electrochemical and interfacial behavior of a FeSi2.7 thin film electrode in an ionic liquid electrolyte10.1016/j.electacta.2011.08.080 ↗
17. Effect of multilayer structure on cyclic performance of Si/Fe anode electrode in lithium-ion secondary batteries10.1039/C2CP42824E ↗
18. Corrigendum to “Si, Si/Cu core in carbon shell composite as anode material in lithium-ion batteries”10.1016/j.ssi.2007.07.010 ↗
19. Combinatorial investigations of Si-M (M=Cr+Ni,Fe,Mn) thin film negative electrode materials10.1149/1.1850395 ↗
20. Si–Mn/reduced graphene OXIDE nanocomposite anodes with enhanced capacity and stability for lithium-ion batteries10.1021/am404608d ↗
21. Si-Mn composite anodes for lithium ion batteries10.1016/j.jallcom.2005.07.026 ↗
22. Innovative nanosize lithium storage alloys with silica as active centre10.1016/S0378-7753(00)00385-2 ↗
23. A computational study of the insertion of Li, Na, and Mg atoms into Si(111) nanosheets10.1016/j.nanoen.2013.04.007 ↗
24. Electrochemical characterization of Ti–Si and Ti–Si–Al alloy anodes for Li-ion batteries produced by mechanical ball milling10.1016/j.jallcom.2008.04.102 ↗
25. The electrochemical reaction of Li with amorphous Si-Sn alloys10.1149/1.1530151 ↗
26. Electrochemical reaction of the Si1−xZnx binary system with Li10.1149/1.2098407 ↗
27. Effects of mechanical milling and arc-melting processes on the electrochemical performance of Si-based composite materials10.1016/j.matlet.2006.02.052 ↗
28. Electrochemical properties of Si/Ni alloy-graphite composite as an anode material for Li-ion batteries10.1016/j.electacta.2005.04.042 ↗
29. Si–Ni–Carbon composite synthesized using high energy mechanical milling for use as an anode in lithium ion batteries10.1016/j.matchemphys.2006.02.011 ↗
30. A Combinatorial study of the Sn-Si-C system for Li-ion battery applications10.1149/2.075206jes ↗
31. Electrochemical properties of Si-Mn/C as anode materials for lithium ion batteries
32. Cyclic properties of Si-Cu/carbon nanocomposite anodes for Li-ion secondary batteries10.1149/1.1856990 ↗
33. Electrochemical properties of Si-Zn-C composite as an anode material for lithium-ion batteries10.1016/j.jpowsour.2007.01.096 ↗
34. Developing lithium ion battery silicon/cobalt core-shell electrodes for enhanced electrochemical properties10.1016/j.ijhydene.2014.08.080 ↗
35. Sn-119 Mossbauer spectroscopy analysis of Sn-Co-C composites prepared from a fuel oil pyrolysis precursor as anodes for Li-ion batteries10.1016/j.matchemphys.2012.12.052 ↗
36. Ternary Sn–Co–C Li-ion battery electrode material prepared by high energy ball milling10.1016/j.elecom.2007.05.033 ↗
37. An electrochemical investigation of a Sn–Co–C ternary alloy as a negative electrode in Li-ion batteries10.1016/j.jpowsour.2007.06.067 ↗
38. Si–graphite composites as anode materials for lithium secondary batteries10.1016/j.jpowsour.2010.03.008 ↗
39. Enhanced rate capability by employing carbon nanotube-loaded electrospun Si/C composite nanofibers as binder-free anodes10.1149/2.031304jes ↗
40. A novel carbon–silicon composite nanofiber prepared via electrospinning as anode material for high energy-density lithium ion batteries10.1016/j.jpowsour.2010.01.088 ↗
41. Enhanced cycle performance of SiO-C composite anode for lithium-ion batteries10.1016/j.jpowsour.2007.03.081 ↗
42. The crystal structural evolution of nano-Si anode caused by lithium insertion and extraction at room temperature10.1016/S0167-2738(00)00362-3 ↗
43. Si/C composite lithium-ion battery anodes synthesized from coarse silicon and citric acid through combined ball milling and thermal pyrolysis10.1016/j.electacta.2010.02.006 ↗
44. Enhanced oxygen exchange near the oxide/silicon interface during silicon thermal oxidation10.1016/j.tsf.2006.11.052 ↗
45. Silicon/carbon composites as anode materials for Li-ion batteries10.1149/1.1795031 ↗
46. A room temperature study of the binary lithium-silicon and the ternary lithium-chromium-silicon system for use in rechargeable lithium
47. Li insertion/extraction reaction at a Si film evaporated on a Ni foil10.1016/S0378-7753(03)00301-X ↗
48. Carbon/Ba–Fe–Si alloy composite as high capacity anode materials for Li-ion batteries10.1016/j.elecom.2003.09.004 ↗
49. SiO2/Cu/polyacrylonitrile-C composite as anode material in lithium ion batteries10.1016/j.jpowsour.2013.05.017 ↗