journal article·2020-02Open access

A regenerative braking system for internal combustion engine vehicles using supercapacitors as energy storage elements - Part 1: System analysis and modelling

Emiliano Pipitone, Gianpaolo Vitale

Abstract

In this two-part work, an electric kinetic energy recovery system (e-KERS) for internal combustion engine vehicle (ICEV) is presented, and its performance evaluated through numerical simulations. The KERS proposed is based on the use of a supercapacitor as energy storage, interfaced to a brushless machine through a properly designed power converter. In part 1, the system is described and analysed, and the mathematical model used for the simulations is presented. For each component of the KERS, the real efficiency, and the power or energy limitations are adequately considered. In part 2, the energetic and economic advantages attainable by the proposed KERS are evaluated using MATLAB Simulink, considering a widely diffused passenger car and two reference driving cycles (ECE-15 and Artemis Urban). Energy savings of the order of 20% were found, with a slight increase in vehicle weight (+2%) and with an overall commercial cost that would be compensated in 5 years thanks to the fuel economy improvement, to which corresponds an equal reduction of CO emissions. The low complexity of the system, never proposed for ICEV, the moderate weight of its components, and their availability on the market, make the solution presented ready for the introduction in current vehicle production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Electric and Hybrid Vehicle Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Experimental-analytical investigation to estimate an emission inventory from road transport sector
2. Advantages of ethanol–gasoline blends as fuel substitute for last generation Si engines10.1002/ep.12545 ↗
3. Experimental determination of liquefied petroleum gas-gasoline mixtures knock resistance10.1115/1.4027831 ↗
4. Functional design of power-split CVTs: an uncoupled hierarchical optimized model10.1016/j.mechmachtheory.2017.06.003 ↗
5. Direct analysis of power-split CVTs: a unified method10.1016/j.mechmachtheory.2017.10.006 ↗
6. A survey on driving prediction techniques for predictive energy management of plug-in hybrid electric vehicles10.1016/j.jpowsour.2018.11.085 ↗
7. Dynamic programming for new energy vehicles based on their work modes Part II: fuel cell electric vehicles10.1016/j.jpowsour.2018.10.048 ↗
8. Control strategy of fuel cell/supercapacitors hybrid power sources for electric vehicle10.1016/j.jpowsour.2005.09.014 ↗
9. Supercapacitors for the energy management of electric vehicles10.1016/S0378-7753(99)00326-2 ↗
10. Sovran · 2006
11. Xu · 2019
12. Ultracapacitors for fuel saving in small size hybrid vehicles10.1016/j.jpowsour.2009.07.041 ↗
13. The power capability of ultracapacitors and lithium batteries for electric and hybrid vehicle applications10.1016/j.jpowsour.2010.06.092 ↗
14. Preliminary experimental evaluation of a four wheel motors, batteries plus ultracapacitors and series hybrid powertrain10.1016/j.apenergy.2010.08.008 ↗
15. A novel equivalent consumption minimization strategy for hybrid electric vehicle powered by fuel cell, battery and supercapacitor10.1016/j.jpowsour.2018.05.078 ↗
16. Energy management strategy for fuel cell-supercapacitor hybrid vehicles based on prediction of energy demand10.1016/j.jpowsour.2017.06.016 ↗
17. Energy management of fuel cell/battery/supercapacitor hybrid power source for vehicle applications10.1016/j.jpowsour.2008.12.120 ↗
18. Sizing for fuel cell/supercapacitor hybrid vehicles based on stochastic driving cycles10.1016/j.apenergy.2016.09.008 ↗
19. Electrochemical and electrostatic energy storage and management systems for electric drive vehicles: state-of-the-art review and future trends10.1109/JESTPE.2016.2566583 ↗
20. Regenerative braking modeling, control, and simulation of a hybrid energy storage system for an electric vehicle in extreme conditions10.1109/TTE.2016.2608763 ↗
21. A bidirectional nonisolated multi-input DC–DC converter for hybrid energy storage systems in electric vehicles10.1109/TVT.2015.2500683 ↗
22. Hybrid battery/supercapacitor energy storage system for the electric vehicles10.1016/j.jpowsour.2017.11.040 ↗
23. Energy management strategies comparison for electric vehicles with hybrid energy storage system10.1016/j.apenergy.2014.08.035 ↗
24. So · 2016 · 1
25. Energy transfer and utilization efficiency of regenerative braking with hybrid energy storage system10.1016/j.jpowsour.2019.04.083 ↗
26. Controllable regenerative braking process for hybrid battery–ultracapacitor electric drive systems10.1049/iet-pel.2018.5685 ↗
27. An interleaved buck-boost-converter combined with a supercapacitor-storage for the stabilization of automotive power nets
28. Evaluation strategy of regenerative braking energy for supercapacitor vehicle10.1016/j.isatra.2014.09.011 ↗
29. Comparative analysis of two hybrid energy storage systems used in a two front wheel driven electric vehicle during extreme start-up and regenerative braking operations10.1016/j.enconman.2017.04.036 ↗
30. Cui · 2019
31. Recuperation of regenerative braking energy in electric rail transit systems10.1109/TITS.2018.2886809 ↗
32. Energy recovery systems for retrofitting in internal combustion engine vehicles: a review of techniques10.1016/j.rser.2014.08.083 ↗
33. Flywheel based kinetic energy recovery systems (KERS) integrated in vehicles
34. Gasoline hybrid pneumatic engine for efficient vehicle powertrain hybridization10.1016/j.apenergy.2015.03.057 ↗
35. Hu · 2008 · 1
36. Performance analysis of a novel coaxial power-split hybrid powertrain using a CNG engine and supercapacitors10.1016/j.apenergy.2014.12.086 ↗
37. Upendra · 2015
38. Automotive electrification: the nonhybrid story10.1109/TTE.2015.2426573 ↗
39. Supercapacitor modelling by Lagrange's equations
40. Thermal modeling and heat management of supercapacitor modules for vehicle applications10.1016/j.jpowsour.2009.06.038 ↗
41. Review of supercapacitors: materials and devices10.1016/j.est.2019.01.010 ↗
42. Supercapacitors: properties and applications10.1016/j.est.2018.03.012 ↗
43. Review on supercapacitors: technologies and materials10.1016/j.rser.2015.12.249 ↗
44. Recent advancements in supercapacitor technology10.1016/j.nanoen.2018.08.013 ↗
45. Hollow nickel-cobalt-manganese hydroxide polyhedra via MOF templates for high-performance quasi-solid-state supercapacitor10.1016/j.cej.2019.122210 ↗
46. High-performing and stable wearable supercapacitor exploiting rGO aerogel decorated with copper and molybdenum sulfides on carbon fibers10.1021/acsaem.8b00904 ↗
47. Innovative multipolymer electrolyte membrane designed by oxygen inhibited UV-crosslinking enables solid-state in plane integration of energy conversion and storage devices10.1016/j.energy.2018.10.162 ↗
48. In-situ growth of vertically aligned nickel cobalt sulfide nanowires on carbon nanotube fibers for high capacitance all-solid-state asymmetric fiber-supercapacitors10.1016/j.jechem.2019.05.008 ↗
49. Current control strategy for brushless dc motors based on a common DC signal10.1109/63.988834 ↗
50. Vitale
51. Energy saving by power electronics: towards a new concept of renewable source, Invited paper - plenary Session
52. Comprehensive conceptualization, design, and experimental verification of a weight-optimized all-sic 2 kV/700 V DAB for an airborne wind turbine10.1109/JESTPE.2015.2459378 ↗
53. Power losses in outside-spin brushless D.C. Motors
54. Modeling power losses in electric vehicle BLDC motor
55. Dalle · 2012 · 244
56. Reproducibility vs. Replicability: a brief history of a confused terminology10.3389/fninf.2017.00076 ↗