journal article·2019-10

Reversible phase transition enabled by binary Ba and Ti-based surface modification for high voltage LiCoO2 cathode

Bei Hu, Xiaobing Lou, Chao Li, Fushan Geng, Chong Zhao, Jianyin Wang, Ming Shen, Bingwen Hu

Publisher page

Abstract

Abstract As a popular commercialized cathode material in lithium-ion batteries, the cycle life, practical reversible capacity, and rate capabilities of LiCoO2 (LCO) at high voltage are limited owning to structural irreversibility and surface side reactions. Here, we employ a binary Ba and Ti-based hybrid surface treatment on LiCoO2 (LCO@BT) by facile wet chemical routes. This strategy integrates the advantages of both interface particle doping and surface coating as the layered structure of LCO is stabilized by a binary hybrid surface treatment, and the modified layer promotes the surface Li+ diffusivity and protects the LCO cathode from steady corrosion induced by surface side reaction. On the basis of in-situ NMR characterizations, it is found that after the first electrochemical delithiation/lithiation the phase reversibly changes from O3–I-type in LCO@BT and back to O3–I-type LxCO@BT (0.98 ≤ x<1) rather than to a two-phase domain of O3–I and O3-II phase in uncoated LxCO (x<0.98). The target material is achievable in displaying an initial discharge capacity of 190.5 mAh g−1 and delivers a high capacity retention of 90.29% (172 mAh g−1) at 0.2C after 100 cycles which is superior to most LiCoO2 cathodes that are operated at high cut-off voltage of 4.5V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Higher, stronger, better… a review of 5 volt cathode materials for advanced lithium-ion batteries10.1002/aenm.201200068 ↗
2. Issue and challenges facing rechargeable thin film lithium batteries10.1016/j.materresbull.2007.08.031 ↗
3. Ultrahigh-energy-density lithium-ion batteries based on a high-capacity anode and a high-voltage cathode with an electroconductive nanoparticle shell10.1002/aenm.201301542 ↗
4. Surface engineering strategies of layered LiCoO2 cathode material to realize high-energy and high-voltage Li-ion cells10.1002/aenm.201601507 ↗
5. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
6. Soft chemistry synthesis and characterization of layered Li1-xNi1-yCoyO2-δ (0≤x≤1 and 0≤y≤1)10.1021/cm0102537 ↗
7. Comparison of the chemical stability of Li1−xCoO2 and Li1−xNi0.85Co0.15O2 cathodes10.1006/jssc.2001.9404 ↗
8. Phase relationships and structural and chemical stabilities of charged Li1-xCoO2−δ and Li1−xNi0.85Co0.15O2−δ cathodes10.1149/1.1525430 ↗
9. Surface modifications of electrode materials for lithium ion batteries10.1016/j.solidstatesciences.2005.10.019 ↗
10. Effect of a ZrO2 coating on the structure and electrochemistry of LixCoO2 when cycled to 4.5 V10.1149/1.1503202 ↗
11. Nano-CuO coated LiCoO2: synthesis, improved cycling stability and good performance at high rates10.1016/j.electacta.2011.04.097 ↗
12. Origin of surface coating effect for MgO on LiCoO2 to improve the interfacial reaction between electrode and electrolyte10.1002/admi.201400195 ↗
13. Olivine LiCoPO4 phase grown LiCoO2 cathode material for high density Li batteries10.1016/j.elecom.2006.08.058 ↗
14. Characterization of spinel LixCo2O4-coated LiCoO2 prepared with post-thermal treatment as a cathode material for lithium ion batteries10.1021/acs.chemmater.5b00159 ↗
15. Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries10.1038/s41467-018-07296-6 ↗
16. Electrochemical properties of LiMxCo1−xO2 [M = Mg, Zr] prepared by sol-gel process10.1016/j.jpowsour.2004.06.024 ↗
17. Low-concentration donor-doped LiCoO2 as a high performance cathode material for Li-ion batteries to operate between -10.4 and 45.4 °C10.1039/c2jm35550g ↗
18. Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density10.1039/C8CS00322J ↗
19. Enhancement of ultrahigh rate chargeability by interfacial nanodot BaTiO3 treatment on LiCoO2 cathode thin film batteries10.1021/acs.nanolett.8b04690 ↗
20. High-rate performance of ferroelectric BaTiO3-coated LiCoO2 for Li-ion batteries10.1063/1.4898006 ↗
21. High-rate capabilities of ferroelectric BaTiO3-LiCoO2 composites with optimized BaTiO3 loading for Li-ion batteries10.1149/2.0041512eel ↗
22. In situ 7Li nuclear magnetic resonance observation of the electrochemical intercalation of lithium in graphite; 1st cycle10.1016/j.carbon.2006.12.018 ↗
23. Preparation and characteristics of Fe3O4-BaTiO3 heterostructural nanocomposite as photocatalyst10.1007/s11164-013-1412-9 ↗
24. High-rate capabilities of ferroelectric BaTiO3-LiCoO2 composites with optimized BaTiO3 loading for Li-ion batteries10.1149/2.0041512eel ↗
25. Enhancing the kinetics of Li-rich cathode materials through the pinning effects of gradient surface Na+ doping10.1002/aenm.201501914 ↗
26. The investigation of Ti-modified LiCoO2 materials for lithium ion battery10.1016/j.jpowsour.2014.03.073 ↗
27. Trimethyl phosphite as an electrolyte additive for high-voltage lithium-ion batteries using lithium-rich layered oxide cathode10.1016/j.jpowsour.2013.04.038 ↗
28. In situ NMR observation of the lithium extraction/insertion from LiCoO2 cathode10.1016/j.electacta.2013.06.120 ↗
29. Lithium-7 NMR studies of Li1-xCoO2 battery cathodes, solid state ionics IV
30. Staging phase transitions in LixCoO210.1149/1.1519850 ↗
31. The insulator-metal transition upon lithium deintercalation from LiCoO2: electronic properties and 7Li NMR study10.1039/a900016j ↗
32. A first-order Mott transition in LixCoO210.1038/nmat1178 ↗
33. In situ impedance analysis on BaTiO3-LiCoO2 composite cathodes for lithium ion batteries10.7567/JJAP.54.10NB02 ↗
34. Structure dependent electrochemical performance of Li-rich layered oxides in lithium-ion batteries10.1016/j.nanoen.2017.04.005 ↗
35. Electrochemical and in situ X-ray diffraction studies of lithium intercalation in LixCoO210.1149/1.2221184 ↗
36. First-principles investigation of phase stability in LixCoO210.1103/PhysRevB.58.2975 ↗