Comparative study of various cathodes for lithium ion batteries using an enhanced Peukert capacity model
Source abstract
Abstract
Abstract Numerical models for battery management systems must be computationally efficient with enough accuracy for predictive usage when the vehicle is operating. For electric vehicles (EVs), this requires accounting for capacity offset, temperature dependency, and battery aging effects. This effort provides an enhanced formulation of Peukert's equation including temperature effects and the inclusion of an absolute capacity that is calibrated to five different cathodes (LiCoO2, LiCoNiAlO2, LiNiMnCoO2, LiMnNiO2, and LiFePO4) with two types of crystal structures (layered and olivine) from four manufacturers. After data collection using a Vencon battery analyzer and two thermistors measuring self-heating temperature swings, the results demonstrate that the model works relatively well in predicting the State of Charge curve. As expected, the capacity specific parameter is near unity when simulating low offset olivine compounds; whereas, the temperature dependent variable illustrates a wide-range of values with cobalt constituted chemistries on the higher end. Additionally, the model tends to perform better for non-spinel compounds and that manufacturer specified nominal capacities are around 95–99% of the model defined absolute capacity. Overall, the technique of separating current and temperature based phenomena and recognizing modeled patterns that align with current literature are useful steps in developing an efficient battery model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. U.S. Department of Energy · 2018
2. The impact of range anxiety and home, workplace, and public charging infrastructure on simulated battery electric vehicle lifetime utility10.1016/j.jpowsour.2014.01.075 ↗
3. Über die Abhängigkeit der Kapazität von der Entladestromstärke bei Bleiakkumulatoren
4. Peukert revisited—critical appraisal and need for modification for lithium-ion batteries10.3390/en6115625 ↗
5. Charge and discharge characteristics of a commercial LiCoO2-based 18650 Li-ion battery10.1016/j.jpowsour.2006.03.037 ↗
6. Understanding and recent development of carbon coating on LiFePO4 cathode materials for lithium-ion batteries10.1039/C1EE01263K ↗
7. A facile approach to nanoarchitectured three-dimensional graphene-based Li–Mn–O composite as high-power cathodes for Li-ion batteries10.3762/bjnano.3.59 ↗
8. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
9. Expanding the Peukert equation for battery capacity modeling through inclusion of a temperature dependency10.1016/j.jpowsour.2013.01.174 ↗
10. Development of a temperature-dependent Li-ion battery thermal model
11. A method for state of energy estimation of lithium-ion batteries at dynamic currents and temperatures10.1016/j.jpowsour.2014.07.107 ↗
12. Materials discovery and design using machine learning10.1016/j.jmat.2017.08.002 ↗
13. Comparison study on the battery models used for the energy management of batteries in electric vehicles10.1016/j.enconman.2012.04.014 ↗
14. Battery performance models in ADVISOR10.1016/S0378-7753(02)00194-5 ↗
15. An enhanced circuit-based model for single-cell battery
16. A critical review of using the Peukert equation for determining the remaining capacity of lead-acid and lithium-ion batteries10.1016/j.jpowsour.2005.04.030 ↗
17. A quick method of measuring the capacity versus discharge rate for a dual lithium-ion insertion cell undergoing cycling10.1016/0378-7753(94)02012-4 ↗
18. Cycle-life model for graphite-LiFePO4 cells10.1016/j.jpowsour.2010.11.134 ↗
19. Transients of monolithic catalytic converters: response to step changes in feedstream temperature as related to controlling automobile emissions10.1021/i300005a006 ↗
20. Multipole analysis of the electron density in triphylite, LiFePO4, using X-ray diffraction data10.1107/S0108768192004701 ↗
21. Layered Li [NixCo1-2xMnx]O2 cathode materials for lithium-ion batteries10.1149/1.1413182 ↗
22. General Motors Corporation · 2016
23. Timofeeva · 2017
24. Ozoemena · 2016
25. Qnovo Incorporated · 2015
26. Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle (PHEV) applications: IV. Over-discharge phenomena10.1149/2.0481509jes ↗
27. Fehrenbacher · 2015
28. Development status and trend of electric vehicles in China10.23919/CJEE.2017.8048407 ↗
29. Choate · 2014
30. Comparative thermal stability of carbon intercalation anodes and lithium metal anodes for rechargeable lithium batteries10.1016/0378-7753(94)02076-F ↗
31. Andrea · 2010
32. A comprehensive capacityfade model and analysis for Li-ion batteries10.1149/2.040310jes ↗
33. Optimal design of Li-ion batteries through multi-physics modeling and multi-objective optimization10.1149/2.0291711jes ↗
34. A thermal-electrochemical model that gives spatial-dependent growth of solid electrolyte interphase in a Li-ion battery10.1016/j.jpowsour.2014.06.050 ↗
35. Modeling of SEI layer growth and electrochemical impedance spectroscopy response using a thermal-electrochemical model of Li-ion batteries10.1149/06127.0043ecst ↗
36. Linden · 2002
37. Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data10.1016/j.jpowsour.2012.05.012 ↗
38. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
39. Thermal modeling of cylindrical lithium ion battery during discharge cycle10.1016/j.enconman.2011.04.013 ↗
40. Semi-empirical modeling of charge and discharge profiles for a LiCoO2 electrode10.1016/j.jpowsour.2006.12.025 ↗
41. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
42. A general discussion of Li ion battery safety
43. Thermal stability of LixCoO2 cathode for lithium ion battery10.1016/S0167-2738(02)00067-X ↗
44. LiCoO2 cathode material that does not show a phase transition from hexagonal to monoclinic phase10.1149/1.1397772 ↗
45. Entropy changes due to structural transformation in the graphite anode and phase change of the LiCoO2 cathode10.1149/1.1393549 ↗
46. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries10.1016/j.jpowsour.2003.10.009 ↗
47. Cycle-life characterization of automotive lithium-ion batteries with LiNiO2 cathode10.1149/1.3126385 ↗
48. Thermal stability and reactivity of cathode materials for Li-ion batteries10.1021/acsami.5b12081 ↗
49. Watanabe · J. Power Sources · 2014 · 260 · 5010.1016/j.jpowsour.2014.02.103 ↗
50. Thermal behaviour of LixMeO2 (Me = Co or Ni + Mn + Co) cathode materials10.1039/C7CP00513J ↗
51. Thermal stability and kinetics of delithiated LiCoO210.1016/j.jpowsour.2010.09.076 ↗
52. Synthesis and electrochemical performance of the high voltage cathode material Li[Li0.2Mn0.56Ni0.16Co0.08]O2 with improved rate capability10.1016/j.jpowsour.2011.01.006 ↗
53. Structure and electrochemistry of Li[NixCo1 − 2xMnx]O2 (0 ≤ x ≤ 1/2)10.1149/1.1505633 ↗
54. Thermal analysis of LiNi0.4Co0.2Mn0.4O2/mesocarbon microbeads cells and electrodes: state-of-charge and state-of-health influences on reaction kinetics10.1149/2.0361802jes ↗
55. Review of 5-V electrodes for Li-ion batteries: status and trends10.1007/s11581-013-0913-2 ↗
56. Calendar aging and gas generation in commercial graphite/NMC-LMO lithium-ion pouch cell10.1149/2.0241714jes ↗
57. Multi-scale computation methods: their applications in lithium-ion battery research and development10.1088/1674-1056/25/1/018212 ↗