Controlling the shape change and dendritic growth in Zn negative electrodes for application in Zn/Ni batteries
Source abstract
Abstract
Abstract Porous zinc electrodes are elaborated, assembled in Zn/Ni 3–4 Ah prismatic batteries and monitored upon charge/discharge cycling (150 cycles at C/3 rate followed by 150 cycles at 1C rate). Migration of zinc within the thickness of the zinc electrodes is revealed by X-Ray radiography, scanning electron microscopy, and X-EDS elemental cartography. Electrodes using either zinc oxide plus calcium hydroxide or directly calcium zincate as active material show similar behavior: neither dendrite formation nor morphological shape changes are observed after 300 charge/discharge cycles. Upon cycling, zinc accumulates at the core of the porous electrode, in the vicinity of the primary current collector and not at the surface, therefore avoiding any risk of dendrite formation. This suggest that the electrode operation is controlled by a core-shell mechanism, with a core of active zinc in the vicinity of the primary current collector, trapped in an electrode shell which is created by the outer portion of the electrode (active material, conductive additives, binder …). However, changing from C/3 to 1C rate after 150 cycles significantly improves the capacity of batteries using calcium zincate; this is correlated to its initial atomic homogeneity associated with higher porosity and an optimal electronic percolation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Linden · 2002
2. Zinc electrode shape change in secondary cells10.1149/1.2404060 ↗
3. A quantitative study of shape change in zinc secondary electrodes10.1007/BF00615838 ↗
4. The current distribution and shape change of zinc electrodes in secondary silver-zinc cells10.1007/BF00610794 ↗
5. Effects of KOH concentration on the shape change and cycle life of Zn/NiOOH cells
6. Zinc electrode shape change10.1149/1.2085582 ↗
7. Methods for the reduction of shape change and dendritic growth in zinc-based secondary cells10.1016/0378-7753(91)80117-G ↗
8. The electrochemistry of metal oxide additives in pasted zinc electrodes10.1016/0013-4686(81)90015-3 ↗
9. Effects of barium on the performance of secondary alkaline zinc electrode10.1016/j.matchemphys.2003.11.015 ↗
10. Effects of additives on performance of zinc electrode10.1016/S1003-6326(14)63500-7 ↗
11. Bismuth oxide as an additive in pasted zinc electrodes10.1016/0378-7753(85)80070-7 ↗
12. The secondary alkaline zinc electrode10.1149/1.2085653 ↗
13. Pasted-rolled zinc electrodes containing calcium hydroxide for use in Zn/NiOOH cells10.1149/1.2100830 ↗
14. Development of long-lived high-performance zinc-calcium/nickel oxide cells10.1007/BF01029582 ↗
15. Zhu · 2006
16. Jain · 1989
17. Effect of ten weight percent KOH electrolyte on the durability of zinc/nickel oxide cells containing zinc electrodes with calcium hydroxide10.1149/1.2085387 ↗
18. A study of calcium zincate as negative electrode materials for secondary batteries10.1016/S0378-7753(01)00833-3 ↗
19. Bugnet · 2004
20. Lacoste · 2016
21. Bernard · 2003
22. Improving active-material utilization10.1016/S0378-7753(97)02501-9 ↗
23. Multifunctional nitrogen-rich “brick-and-mortar” carbon as high performance supercapacitor electrodes and oxygen reduction electrocatalysts10.1039/c3ta12581e ↗
24. “Brick-and-mortar” sandwiched porous carbon building constructed by metal-organic framework and graphene: ultrafast charge/discharge rate up to 2Vs−1 for supercapacitors10.1016/j.nanoen.2016.09.042 ↗
25. Ionic vs electronic power limitations and analysis of the fraction of wired grains in LiFePO[sub 4] composite electrodes10.1149/1.3432559 ↗
26. Multiscale electronic transport mechanism and true conductivities in amorphous carbon–LiFePO 4 nanocomposites10.1039/C2JM13429B ↗
27. A multiscale description of the electronic transport within the hierarchical architecture of a composite electrode for lithium batteries10.1002/adfm.200900379 ↗
28. Ohmic drop in LiFePO4 based lithium battery cathodes containing agglomerates10.1149/2.081206jes ↗