journal article·2017-05

Optimization of 10-μm, sputtered, LiCoO2 cathodes to enable higher energy density solid state batteries

Jason Trask, Abraham Anapolsky, Ben Cardozo, Eric Januar, Kylendra Kumar, Michael Miller, Roy Brown, Ramesh Bhardwaj

Publisher page

Abstract

Abstract An investigation of the morphology of lithium-cobalt-oxide (LCO) films for the production of energy dense, solid-state, thin-film batteries with cathodes in the 10 μm thickness range is described. It was found that, in order to achieve devices with over 80% charge utilization, capable of extended cycling, with cathodes greater than 5 μm, LCO film texture must be actively controlled to maintain orientations preferential to Li diffusion. It was found that the oxygen: argon ratio during sputtering of the cathode plays a critical role in determining the crystallographic texture of LCO films thicker than 5 μm. Specifically, LCO films deposited with an oxygen presence of as little as 4% in Ar showed no detectable (003) peak following anneal. Working cells were fabricated using texture-controlled 10 μm cathodes, exhibiting discharge capacities of 60 μAh/cm2-μm (600 μAh/cm2) at C/10, with greater than 95% capacity retention after 100 cycles at a C/5 discharge rate. Cells with 10 μm cathodes and un-controlled (predominantly (003)) texture were capable of achieving similar capacities, however their rate and cycling performance were severely diminished.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Solid-state thin-film rechargeable batteries10.1016/j.mseb.2004.05.045 ↗
2. Thin-film lithium and lithium ion batteries10.1016/S0167-2738(00)00327-1 ↗
3. Characterization of thin-film rechargeable lithium batteries with lithium cobalt oxide cathodes10.1149/1.1837188 ↗
4. Wakabayashi · 2016
5. D. W. Murphy et al., “A stable thin-film lithium electrolyte: lithium phosphorus oxynitride,” J. Electrochem. Soc. Sci. This J. Carides, J. V. Waszczak, ibid. Inorg. Chem. Chem. Soc. This J., vol. 144965, no. 143, pp. 150–1115, 1997.
6. Thin-film materials for solid-state rechargeable lithium batteries J. F. Ribeiro10.1149/04529.0139ecst ↗
7. Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries10.1016/0378-7753(93)80106-Y ↗
8. An interpretation for the increase of ionic conductivity by nitrogen incorporation in LiPON oxynitride glasses10.1016/j.ssi.2012.12.017 ↗
9. LiCoO2 cathode thin film fabricated by RF sputtering for lithium ion microbatteries10.1016/j.surfcoat.2009.10.057 ↗
10. Effects of radio-frequency sputtering powers on the microstructures and electrochemical properties of LiCoO2 thin film electrodes10.1016/j.jpowsour.2008.09.065 ↗
11. Characterization of all-solid-state secondary batteries with LiCoO2 thin films prepared by ECR sputtering as positive electrodes10.1016/j.jpowsour.2008.09.108 ↗
12. Free-form flexible lithium-ion microbattery10.1109/TNANO.2016.2537338 ↗
13. Preferred orientation of polycrystalline LiCoO[sub 2] films10.1149/1.1393157 ↗
14. Influence of diffusion plane orientation on electrochemical properties of thin film LiCoO2 electrodes10.1149/1.1471543 ↗
15. Preparation of c-axis oriented thin films of LiCoO2 by pulsed laser deposition and their electrochemical properties10.1016/S0378-7753(00)00580-2 ↗
16. Lattice orientation control of lithium cobalt oxide cathode film for all-solid-state thin film batteries10.1016/j.jpowsour.2012.10.094 ↗
17. The thermodynamic origin of hysteresis in insertion batteries10.1038/nmat2730 ↗
18. Electrochemical and in situ x-ray diffraction studies of lithium intercalation in LiCoO210.1149/1.2221184 ↗
19. Tailoring the morphology of LiCoO2: a first principles study10.1021/cm9008943 ↗
20. Oxygen vacancies and intermediate spin trivalent cobalt ions in lithium-overstoichiometric LiCoO210.1021/cm021279g ↗
21. Investigations on the influence of the substrate on the crystal structure of sputtered LiCoO210.1007/s10008-011-1377-9 ↗
22. High-temperature X-ray diffraction study of Co3O4: transition from normal to disordered spinel10.1007/BF00199669 ↗
23. Kinetics investigation of a preferential (104) plane oriented LiCoO2 thin film prepared by RF magnetron sputtering10.1016/j.ssi.2007.06.007 ↗
24. Fabrication of LiCoO2 thin film cathodes by DC magnetron sputtering method10.1016/j.materresbull.2012.04.065 ↗
25. Lithium cobalt oxide cathode film prepared by rf sputtering10.1016/j.jpowsour.2003.09.065 ↗
26. Patterning and annealing of nanocrystalline LiCoO2 thin films
27. J. Noh, G. Cho, K. Jung, W. Kang, C. Ha, H. Ahn, J. Ahn, T. Nam, K. Kim, “Pinhole-free solid state electrolytes with high ionic conductivity,” US9356316, 2016.
28. Characterization of Al-doped spinel LiMn2O4 thin film cathode electrodes prepared by Liquid Source Misted Chemical Deposition (LSMCD) technique10.1016/S0013-4686(03)00608-X ↗
29. Preparation and characterization of Cr-doped LiMnO2 cathode materials by Pechini's method for lithium ion batteries10.1016/j.matchemphys.2013.01.030 ↗