Layered P2-Na2/3Co1/2Ti1/2O2 as a high-performance cathode material for sodium-ion batteries
Source abstract
Abstract
Abstract Layered oxides are regarded as promising cathode materials for sodium-ion batteries. We present Na 2/3 Co 1/2 Ti 1/2 O 2 as a potential new cathode material for sodium-ion batteries. The crystal features and morphology of the pristine powder were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The cathode material is evaluated in galvanostatic charge-discharge and galvanostatic intermittent titration tests, as well as ex-situ X-ray diffraction analysis. Synthesized by a high-temperature solid state reaction, Na 2/3 Co 1/2 Ti 1/2 O 2 crystallizes in P2-type structure with P 6 3 / mmc space group. The material presents reversible electrochemical behavior and delivers a specific discharge capacity of 100 mAh g −1 when tested in Na half cells between 2.0 and 4.2 V (vs. Na + /Na), with capacity retention of 98% after 50 cycles. Furthermore, the electrochemical cycling of this titanium-containing material evidenced a reduction of the potential jumps recorded in the Na x CoO 2 parent phase, revealing a positive impact of Ti substitution for Co. The ex-situ XRD measurements confirmed the reversibility and stability of the material. No structural changes were observed in the XRD patterns, and the P2-type structure was stable during the charge/discharge process between 2.0 and 4.2 V vs. Na + /Na. These outcomes will contribute to the progress of developing low cost electrode materials for sodium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Is lithium the new gold?10.1038/nchem.680 ↗
3. Review—Practical issues and Future Perspective for Na-ion batteries10.1149/2.0151514jes ↗
4. Research development on sodium-ion batteries10.1021/cr500192f ↗
5. Review—Manganese-based P2-type transition metal oxides as sodium-ion battery cathode materials10.1149/2.0201514jes ↗
6. NaTiO2: a layered anode material for sodium-ion batteries10.1039/C4EE03045A ↗
7. Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials10.1039/c1ee01782a ↗
8. Synthesis and characterization of a new layered cathode material for sodium ion batteries10.1016/j.jpowsour.2014.05.042 ↗
9. Etude par Désintercalation Electrochimique des Systemes NaxCrO2 et NaxNiO210.1016/0025-5408(82)90124-6 ↗
10. Electrochemical Na-deintercalation from NaVO210.1149/1.3555102 ↗
11. Comportement éléctrochimique des phases NaxCoO210.1016/0025-5408(80)90199-3 ↗
12. Rechargeable electrodes from sodium cobalt bronzes10.1149/1.2095407 ↗
13. Large enhancement of the thermopower in Na(x)CoO2 at high Na doping10.1038/nmat1669 ↗
14. High-temperature thermoelectric properties of NaxCoO2-δ single crystals10.1143/JJAP.40.4644 ↗
15. Electrochemical intercalation and deintercalation of NaxMnO2 bronzes10.1016/0022-4596(85)90194-X ↗
16. Rechargeable electrodes from sodium cobalt bronzes10.1149/1.2095407 ↗
17. The P2-Na(2/3)Co(2/3)Mn(1/3)O2 phase: structure, physical properties and electrochemical behavior as positive electrode in sodium battery10.1039/c1dt10798d ↗
18. NaFe0.5Co0.5O2 as high energy and power positive electrode for Na-ion batteries10.1016/j.elecom.2013.05.012 ↗
19. Synthesis, structure, and electrochemical properties of the layered sodium insertion cathode material: NaNi1/3Mn1/3Co1/3O210.1021/cm300466b ↗
20. Toward Na-ion batteries: synthesis and characterization of a novel high capacity Na ion intercalation material10.1021/cm3029615 ↗
21. Synthesis and electrochemical behaviors of layered Na0.67[Mn0.65Co0.2Ni0.15]O2 Microflakes as a stable cathode material for sodium-ion batteries10.1039/c3ta01430d ↗
22. New P2-Na0.70Mn0.60Ni0.30Co0.10O2 layered oxide as electrode material for Na-ion batteries10.1149/2.0121414jes ↗
23. High capacity positive electrode material for room temperature Na ion battery: NaxMn2/3Co1/6Ni1/6O210.1149/2.0181504jes ↗
24. Electrochemical properties of NaNi1/3Co1/3Fe1/3O2 as a cathode material for Na-ion batteries10.1016/j.elecom.2013.11.015 ↗
25. O3-type Na(Mn0.25Fe0.25Co0.25Ni0.25)O2: a quaternary layered cathode compound for rechargeable Na ion batteries10.1016/j.elecom.2014.10.003 ↗
26. P2-type Na2/3Ni1/3Mn2/3-xTixO2 as a new positive electrode for higher energy Na-ion batteries10.1039/C3CC49856E ↗
27. Electrochemical performance of NaFex(Ni0.5Ti0.5)1-xO2 (x = 0.2 and x = 0.4) cathode for sodium-ion battery10.1016/j.jpowsour.2014.09.050 ↗
28. An Ultrastable anode for long-life room-temperature sodium-ion batteries10.1002/ange.201404549 ↗
29. Nuclear quadrupole resonance and X-ray investigation of the structure of Na2/3CoO210.1103/PhysRevB.80.224106 ↗
30. P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 cathode material with high-capacity for sodium-ion battery10.1016/j.electacta.2013.10.211 ↗
31. Physicochemical properties of NaxCoO2 as a cathode for solid state sodium battery10.1016/j.ssi.2010.04.022 ↗
32. Mg-doping for improved long-term cyclability of layered Na-ion cathode materials: the example of P2-type NaxMg0.11Mn0.89O210.1016/j.jpowsour.2015.02.069 ↗
33. A study of the NaxTiO2 system by electrochemical deintercalation10.1007/BF00658014 ↗
34. Low temperature phase transitions and crystal structure of Na0.5CoO210.1088/0953-8984/16/32/016 ↗
35. Investigation of P2-Na2/3Mn1/3Fe1/3Co1/3O2 for Na-Ion battery positive electrodes10.1149/2.0981414jes ↗
36. Galvanostatic intermittent titration technique for phase-transformation electrodes10.1021/jp9113333 ↗
37. In situ X-ray diffraction studies on structural changes of a P2 layered material during electrochemical desodiation/sodiation10.1002/adfm.201500469 ↗
38. In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O210.1149/1.1407247 ↗
39. P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries10.1039/C4TA04351K ↗
40. P2-NaxMn1/2Fe1/2O2 phase used as positive electrode in Na batteries: structural changes induced by the electrochemical (De)intercalation process10.1021/ic5017802 ↗
41. Passivation layer and cathodic redox reactions in sodium-ion batteries Probed by HAXPES10.1002/cssc.201501282 ↗