journal article·2015-03

Model predictive control of the solid oxide fuel cell stack temperature with models based on experimental data

Antti Pohjoranta, Matias Halinen, Jari Pennanen, Jari Kiviaho

Publisher page

Abstract

Generalized predictive control (GPC) is applied to control the maximum temperature in a solid oxide fuel cell (SOFC) stack and the temperature difference over the stack. GPC is a model predictive control method and the models utilized in this work are ARX-type (autoregressive with extra input), multiple input-multiple output, polynomial models that were identified from experimental data obtained from experiments with a complete SOFC system. The proposed control is evaluated by simulation with various input–output combinations, with and without constraints. A comparison with conventional proportional-integral-derivative (PID) control is also made. It is shown that if only the stack maximum temperature is controlled, a standard PID controller can be used to obtain output performance comparable to that obtained with the significantly more complex model predictive controller. However, in order to control the temperature difference over the stack, both the stack minimum and the maximum temperature need to be controlled and this cannot be done with a single PID controller. In such a case the model predictive controller provides a feasible and effective solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Control Systems Optimization · Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Durability of solid oxide cells10.1515/green.2011.015 ↗
2. Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: probability of failure of the cells10.1016/j.jpowsour.2008.12.050 ↗
3. Locally-resolved study of degradation in a SOFC repeat-element10.1149/1.3205555 ↗
4. Dynamic modeling of fuel cells
5. A review of solid oxide fuel cell (SOFC) dynamic models10.1021/ie801664j ↗
6. On the intrinsic transient capability and limitations of solid oxide fuel cell systems10.1016/j.jpowsour.2008.11.057 ↗
7. An analysis of the control and operation of a solid oxide fuel-cell power plant in an isolated system10.1109/TEC.2005.847998 ↗
8. Data-driven predictive control for solid oxide fuel cells10.1016/j.jprocont.2006.09.004 ↗
9. Nonlinear model predictive control of SOFC based on a Hammerstein model10.1016/j.jpowsour.2008.06.064 ↗
10. Physically based model-predictive control for SOFC stacks and systems10.1149/1.3205646 ↗
11. Robust control of solid oxide fuel cell ultracapacitor hybrid system
12. Dynamic modeling, simulation and MIMO predictive control of a tubular solid oxide fuel cell10.1016/j.jprocont.2012.01.015 ↗
13. Numerical analysis on dynamic behavior of solid oxide fuel cell with power output control scheme10.1016/j.jpowsour.2012.09.048 ↗
14. Anode-supported intermediate-temperature direct internal reformin solid oxide fuel cell II. Model-based dynamic performance and control10.1016/j.jpowsour.2005.01.017 ↗
15. Control-oriented nonlinear modeling and temperature control for solid oxide fuel cell10.1115/1.3211101 ↗
16. Feedback control of solid oxide fuel cell spatial temperature variation10.1016/j.jpowsour.2009.12.111 ↗
17. Model-based development of low-level control strategies for transient operation of solid oxide fuel cell systems10.1016/j.jpowsour.2011.01.023 ↗
18. Actuator limitations in spatial temperature control of SOFC10.1115/1.4024253 ↗
19. Control of a solid oxide fuel cell system with sensitivity to carbon formation10.1016/j.jpowsour.2012.08.083 ↗
20. Generalized predictive control – Part I. The basic algorithm10.1016/0005-1098(87)90087-2 ↗
21. SOFC stack temperature estimation with data-based models – designed experiments and parameter identification10.1016/j.jpowsour.2014.08.130 ↗
22. Performance of a 10 kW SOFC demonstration unit stacks and systems10.1149/1.3569985 ↗
23. Development of solid oxide fuel cells at Versa Power Systems10.1149/1.3569979 ↗
24. Camacho · 2007
25. The direct approach to unified GPC based on ARMAX/CARIMA/CARMA model and application for pneumatic actuator control
26. Ljung · 1999
27. Model predictive control tuning methods: a review10.1021/ie900323c ↗
28. Effects of multiple stacks with varying performances in SOFC system
29. Åström · 2006