SnCo nanowire array as negative electrode for lithium-ion batteries
Source abstract
Abstract
Abstract Amorphous SnCo alloy nanowires (NWs) grown inside the channels of polycarbonate membranes by potentiostatic codeposition of the two metals (SnCo- PM ) were tested vs. Li by repeated galvanostatic cycles in ethylene carbonate-dimethylcarbonate – LiPF 6 for use as negative electrode in lithium ion batteries. These SnCo electrodes delivered an almost constant capacity value, near to the theoretical for an atomic ratio Li/Sn of 4.4 over more than 35 lithiation–delithiation cycles at 1 C. SEM images of fresh and cycled electrodes showed that nanowires remain partially intact after repeated lithiation–delithiation cycles; indeed, several wires expanded and became porous. Results of amorphous SnCo nanowires grown inside anodic alumina membranes (SnCo- AM ) are also reported. The comparison of the two types of NW electrodes demonstrates that the morphology of the SnCo- PM is more suitable than that of the SnCo- AM for electrode stability over cycling. Optimization of NW technology should thus be a promising route to enhancing the mechanical strength and durability of tin-based electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.