Flash sintering with concurrent crystallization of Li1.5Al0.5Ge1.5(PO4)3 glass
Source abstract
Abstract
Single-phase Li 1.5Al 0.5Ge 1.5(PO 4) 3 NaSICON (Na superionic conductor) glass-ceramic is obtained via a new route using flash-sinter crystallization. Green compacts of glass powder are sinter-crystallized in a few seconds. The results suggest that controlling the current increase during the flash event is needed to avoid overheating, which could cause the melting of the samples. A processing map for the flash sinter-crystallization of Li 1.5Al 0.5Ge 1.5(PO 4) 3 is developed and presented based on the current density and holding time at the steady state. The samples fabricated by flash sinter-crystallization are compared with those conventionally heated. Using this novel technique, single-phase glass-ceramics are obtained with total ionic conductivity at room temperature surpassing that of glass-ceramics prepared by conventional heating (2.26 10 −4 S cm −1 and 1.36 10 −4 S cm −1, respectively).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Microwave Dielectric Ceramics Synthesis · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Origin of fast ion diffusion in superionic conductors10.1038/ncomms15893 ↗
2. First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries10.1039/C5TA08574H ↗
3. Promises and Challenges of Next-Generation "beyond Li-ion" Batteries for Electric Vehicles and Grid Decarbonization10.1021/acs.chemrev.0c00767 ↗
4. Progress and prospective of solid-state lithium batteries10.1016/j.actamat.2012.10.034 ↗
5. Stable LATP/LAGP double-layer solid electrolyte prepared via a simple dry-pressing method for solid state lithium ion batteries10.1039/C6RA19415J ↗
6. Methods for Lithium Ion NASICON Preparation: From Solid-State Synthesis to Highly Conductive Glass-Ceramics10.1021/acs.jpcc.0c07385 ↗
7. Synthesis and Properties of NaSICON-type LATP and LAGP Solid Electrolytes10.1002/cssc.201900725 ↗
8. Correlation between micro-structural properties and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 ceramics10.1016/j.jpowsour.2011.03.065 ↗
9. Solid state lithium ionic conducting thin film Li1.4Al 0.4Ge1.6(PO4)3 prepared by tape casting10.1016/j.jallcom.2013.12.100 ↗
10. Preparation and Electrochemical Properties of Li 1+x Al x Ge 2-x (PO 4) 3 Synthesized by a Sol-Gel Method10.1149/2.080207jes ↗
11. Preparation of Li1.5Al0.5Ge1.5(PO4)3 solid electrolytes via the co-precipitation method10.1080/21870764.2019.1693680 ↗
12. Determination of crystallization kinetics parameters of a Li1.5Al0.5Ge1.5(PO4)3 (LAGP) glass by differential scanning calorimetry10.1590/S1516-14392013005000055 ↗
13. Controlled crystallization and ionic conductivity of a nanostructured LiAlGePO4 glass–ceramic10.1016/j.jnoncrysol.2009.07.012 ↗
14. Glass-to-Crystal Transition in Li 1+ x Al x Ge 2– x (PO 4) 3 : Structural Aspects Studied by Solid State NMR10.1021/jp502265h ↗
15. Fast Li+ ion conducting glass-ceramics in the system Li2O-Al2O3-GeO2-P2O510.1016/S0167-2738(97)00434-7 ↗
16. A bright future for glass-ceramics
17. Updated definition of glass-ceramics10.1016/j.jnoncrysol.2018.01.033 ↗
18. Flash Sintering of Nanograin Zirconia in <5 s at 850°C10.1111/j.1551-2916.2010.04089.x ↗
19. Alternating current field flash sintering 99% relative density ZnO ceramics at room temperature10.1016/j.scriptamat.2019.09.026 ↗
20. Water-assisted flash sintering: Flashing ZnO at room temperature to achieve ∼ 98% density in seconds10.1016/j.scriptamat.2017.08.032 ↗
21. Densification of La0.6Sr0.4Co0.2Fe 0.8O3 ceramic by flash sintering at temperature less than 100°C10.1007/s10853-014-8357-2 ↗
22. Flash sintering of ZnO ceramics at 50 °C under an AC field10.1016/j.ceramint.2019.08.142 ↗
23. Modeling of the temperature distribution of flash sintered zirconia10.2109/jcersj2.119.144 ↗
24. Microstructural evolution of 3YSZ flash-sintered with current ramp control10.1111/jace.17037 ↗
25. Flash Sintering using Controlled Current Ramp10.1016/j.jeurceramsoc.2018.04.003 ↗
26. Flash sintering with current rate: A different approach
27. Electric field-assisted ultrafast synthesis of nanopowders: a novel and cost-efficient approach10.1039/C6RA18734J ↗
28. Beyond flash sintering: How the flash event could change ceramics and glass processing10.1016/j.scriptamat.2020.05.065 ↗
29. Reactive flash sintering of the entropy-stabilized oxide Mg0.2Ni0.2Co0.2Cu0.2Zn0.2O10.1016/j.scriptamat.2020.02.006 ↗
30. Reactive flash sintering of the complex oxide Li0.5La0.5TiO3 starting from an amorphous precursor powder10.1016/j.scriptamat.2019.09.037 ↗
31. Phase evolution during reactive flash sintering of Li6.25Al0.25La3Zr2O12 starting from a chemically prepared powder10.1016/j.jeurceramsoc.2021.02.054 ↗
32. On the synchronicity of flash sintering and phase transformation10.1111/jace.16335 ↗
33. Effects of powder dispersion on reactive flash sintering of 8 mol% yttria-stabilized zirconia and MgAl2O4 composites10.1016/j.scriptamat.2020.08.009 ↗
34. The influence of the processing parameters on the reactive flash sintering of ZrO 2 -CeO 2
35. Reactive flash sintering of ceramics: a review
36. Rapid synthesis of Li 4 Ti 5 O 12 as lithium-ion battery anode by reactive flash sintering10.1111/jace.18086 ↗
37. Viscous flow flash sintering of porous silica glass10.1016/j.jnoncrysol.2017.09.024 ↗
38. Electrode-dependent Joule heating in soda lime silicate glass during flash processes10.1016/j.scriptamat.2020.03.005 ↗
39. DC-electro softening in soda lime silicate glass: An electro-thermal analysis10.1016/j.scriptamat.2018.03.028 ↗
40. C. Mclaren, W. Heffner, R. Tessarollo, R. Raj, H. Jain, Electric field-induced softening of alkali silicate glasses, 184101 (2015) 1–6. 10.1063/1.4934945.10.1063/1.4934945 ↗
41. Development of highly inhomogeneous temperature profile within electrically heated alkali silicate glasses10.1038/s41598-019-39431-8 ↗
42. Solid-state field-assisted ion exchange of Ag in lithium aluminum silicate glass-ceramics: A superfast processing route toward stronger materials with antimicrobial properties10.1016/j.jeurceramsoc.2021.11.035 ↗
43. Lithium Ion-Conducting Glass-Ceramics of Li 1.5 Al 0.5 Ge 1.5 (PO 4) 3 -xLi 2 O (x=0.0-0.20) with Good Electrical and Electrochemical Properties10.1111/j.1551-2916.2007.01827.x ↗
44. Flash sintering of ionic conductors: The need of a reversible electrochemical reaction10.1016/j.jeurceramsoc.2015.12.005 ↗
45. Flash sintering of cationic conductive ceramics: A way to build multilayer systems10.1111/jace.17787 ↗
46. Development of an instrumented and automated flash sintering setup for enhanced process monitoring and parameter control10.1016/j.jeurceramsoc.2018.09.002 ↗
47. On the Arrhenius-like behavior of conductivity during flash sintering of 3 mol% yttria stabilized zirconia ceramics10.1016/j.scriptamat.2021.114093 ↗
48. Flash sintering with current rate: A different approach10.1111/jace.16037 ↗
49. Microstructure evaluation of 3YSZ sintered by Two-Step Flash Sintering10.1016/j.ceramint.2021.04.174 ↗
50. Thermophysical Properties of Lithium Aluminum Germanium Phosphate with Different Compositions10.1007/s10765-020-2607-0 ↗
51. Flash sintering scaling-up challenges: Influence of the sample size on the microstructure and onset temperature of the flash event10.1016/j.scriptamat.2020.04.022 ↗
52. A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution10.1016/j.jeurceramsoc.2020.11.040 ↗
53. GSAS-II : the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
54. Influence of the Field and the Current Limit on Flash Sintering at Isothermal Furnace Temperatures10.1111/jace.12472 ↗
55. Flash sintering of tricalcium phosphate (TCP) bioceramics10.1016/j.jeurceramsoc.2017.08.004 ↗
56. Modelling the particle contact influence on the Joule heating and temperature distribution during FLASH sintering10.1016/j.jeurceramsoc.2019.12.015 ↗
57. Flash sintering incubation kinetics10.1038/s41524-020-00359-7 ↗
58. Correlating Transport and Structural Properties in Li 1+ x Al x Ge 2– x (PO 4) 3 (LAGP) Prepared from Aqueous Solution10.1021/acsami.8b00842 ↗
59. Structural evolution of NASICON-type Li 1+x Al x Ge 2−x (PO 4) 3 using in situ synchrotron X-ray powder diffraction10.1039/C6TA00402D ↗
60. Flash sintering of ceramics10.1016/j.jeurceramsoc.2018.08.048 ↗
61. Viscosity and liquidus-based predictor of glass-forming ability of oxide glasses10.1111/jace.16732 ↗
62. Crystallization of glass-forming liquids: Maxima of nucleation, growth, and overall crystallization rates10.1016/j.jnoncrysol.2015.08.023 ↗
63. Electrochemical stability of a NASICON solid electrolyte from the lithium aluminum germanium phosphate (LAGP) series10.1016/j.ssi.2022.115888 ↗
64. Glass-ceramics in Li1+xAlxGe2-x(PO4)3 system: The effect of Al2O3 addition on microstructure, structure and electrical properties10.1016/j.jallcom.2020.155281 ↗
65. Lithium Ion Diffusion Mechanism and Associated Defect Behaviors in Crystalline Li 1+ x Al x Ge 2– x (PO 4) 3 Solid-State Electrolytes10.1021/acs.jpcc.9b08390 ↗
66. NMR studies of Li mobility in NASICON-type glass-ceramic ionic conductors with optimized microstructure10.1039/C8TA11686E ↗
67. High lithium ion conducting solid electrolytes based on NASICON Li 1+x Al x M 2−x (PO 4) 3 materials (M = Ti, Ge and 0 ≤ x ≤ 0.5)10.1016/j.jeurceramsoc.2014.11.023 ↗