Durable and washable carbon nanotube-based fibers toward wearable thermoelectric generators application
Source abstract
Abstract
Abstract Fiber-based flexible thermoelectric (TE) materials are very promising for wearable electronics. Carbon nanotubes (CNTs) have shown considerable promise as thermoelectric materials, however, integrating CNTs into a fiber always lowers the performance, which limits the application of CNT-based fibers (CNTFs). This work proposes a low-cost and simple manufacturing process based on electrostatic spray technique to prepare high-performance CNTFs, whose TE and mechanical properties can be optimized by tuning spray voltage and time. With the aid of the optimized electrostatic field, the prepared CNTFs possess excellent durability and the electrical conductivity showing almost no degradation after being washed and deformed repeatedly. In addition, the CNTFs are proved to be easily converted into n-type via polyethyleneimine (PEI) doping process. Based on the prepared p- and n-type CNTFs, this work fabricates a π-type thermoelectric generator (TEG), of which the CNTFs show the ability to optimize thermal design to compensate negative effect of the intrinsic high thermal conductivity of CNTs on the output performance of the device. As a result, a maximum power of 26.2 nW with output voltage of 6.46 mV is achieved at a temperature difference of 33.4 K. This method provides a new way for preparing high-performance fiber-based TE materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Sensor and Energy Harvesting Materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Nanomaterial-Enabled wearable sensors for healthcare10.1002/adhm.201700889 ↗
2. Noninvasive featherlight wearable compliant "marine skin": standalone multisensory system for deep-sea environmental monitoring10.1002/smll.201804385 ↗
3. Study of fiber-based wearable energy systems10.1021/acs.accounts.8b00502 ↗
4. Application challenges in fiber and textile electronics10.1002/adma.201901971 ↗
5. Review of wearable thermoelectric energy harvesting: from body temperature to electronic systems10.1016/j.apenergy.2019.114069 ↗
6. Fiber-based energy conversion devices for human-body energy harvesting
7. Piezofibers to smart textiles: a review on recent advances and future outlook for wearable technology10.1039/D0TA00227E ↗
8. Recent progress on textile-based triboelectric nanogenerators10.1016/j.nanoen.2018.10.036 ↗
9. Core-sheath carbon nanostructured fibers for efficient wire-shaped dye-sensitized solar cells10.1002/adma.201305241 ↗
10. Stretchable fabric generates electric power from woven thermoelectric fibers
11. 3D extruded composite thermoelectric threads for flexible energy harvesting10.1038/s41467-019-13461-2 ↗
12. From materials to device design of a thermoelectric fabric for wearable energy harvesters10.1039/C7TA00304H ↗
13. A polymer-based textile thermoelectric generator for wearable energy harvesting10.1016/j.jpowsour.2020.228836 ↗
14. Woven-yarn thermoelectric textiles10.1002/adma.201600709 ↗
15. A convenient and highly tunable way to n-type carbon nanotube thermoelectric composite film using common alkylammonium cationic surfactant10.1039/C8TA07746K ↗
16. High-performance N-type carbon nanotube composites: improved power factor by optimizing the acridine scaffold and tailoring the side chains10.1021/acsami.9b10023 ↗
17. Simple salt-coordinated n-type nanocarbon materials stable in air10.1002/adfm.201600179 ↗
18. Polymer functionalization for air-stable n-type carbon nanotube field-effect transistors10.1021/ja0169670 ↗
19. Flexible and robust thermoelectric generators based on all-carbon nanotube yarn without metal electrodes10.1021/acsnano.7b01771 ↗
20. Enhanced TE properties of Cu@Ag/Bi2Te3 nanocomposites by decoupling electrical and thermal properties,10.1016/j.cclet.2019.07.034 ↗
21. Enhanced thermoelectric properties of hydrothermally synthesized n-type Se&Lu-codoped Bi2Te310.1007/s40145-020-0382-9 ↗
22. Influence of Ge1-xInxTe microstructure on thermoelectric properties10.15541/jim20190641 ↗
23. Functionalization and densification of inter-bundle interfaces for improvement in electrical and thermal transport of carbon nanotube fibers10.1016/j.carbon.2016.04.043 ↗
24. The effect of grain size on the lattice thermal conductivity of an individual polyacrylonitrile-based carbon fiber10.1016/j.carbon.2012.08.052 ↗
25. Investigations into the mechanisms of electrohydrodynamic spraying of liquids: I. Effect of electric field and the environment on pendant drops and factors affecting the formation of stable jets and atomization10.1016/0021-9797(87)90185-8 ↗
26. Electrospray of fine droplets of ceramic suspensions for thin-film preparation10.1016/S0304-3886(00)00039-5 ↗
27. Free-standing flexible multiwalled carbon nanotubes paper for wearable thermoelectric power generator10.1016/j.jpowsour.2019.227493 ↗
28. Modulating carrier type for enhanced thermoelectric performance of single-walled carbon nanotubes/polyethyleneimine composites10.3390/polym11081295 ↗
29. Flexible layer-structured Bi2Te3 thermoelectric on a carbon nanotube scaffold10.1038/s41563-018-0217-z ↗
30. High-performance gas sensors based on single-wall carbon nanotube random networks for the detection of nitric oxide down to the ppb-level10.1039/C8NR07393G ↗
31. Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes10.1039/c2ee22838f ↗
32. The critical role of dopant cations in electrical conductivity and thermoelectric performance of n-doped polymers10.1021/jacs.0c05699 ↗
33. Sub-10-nm graphene nanoribbons with tunable surface functionalities for lithium-ion batteries10.1016/j.electacta.2017.07.183 ↗
34. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs10.1016/j.carbon.2004.08.033 ↗
35. High‐performance flexible thermoelectric devices based on all‐inorganic hybrid films for harvesting low‐grade heat10.1002/adfm.201900304 ↗
36. High-performance and compact-designed flexible thermoelectric modules enabled by a reticulate carbon nanotube architecture
37. Synthesis of freestanding PEDOT:PSS/PVA@Ag NPs nanofiber film for high-performance flexible thermoelectric generator10.1016/j.polymer.2019.01.065 ↗
38. A novel design for a wearable thermoelectric generator based on 3D fabric structure10.1088/1361-665X/aa5694 ↗
39. Carbon-nanotube-based thermoelectric materials and devices10.1002/adma.201704386 ↗