journal article·2021-05

Understanding of hydrocarbon ionomers in catalyst layers for enhancing the performance and durability of proton exchange membrane fuel cells

Xingtong Pu, Yuting Duan, Jialin Li, Chunyu Ru, Chengji Zhao

Publisher page

Abstract

Abstract Sulfonated hydrocarbon polymers have been widely investigated as proton exchange membranes (PEM) for application in proton exchange membrane fuel cells (PEMFC). However, there is very little reports on their incorporation as ionomers in catalyst layers for hydrocarbon-based PEMFC. Hence, three kinds of hydrocarbon ionomers are prepared and incorporated into alcohol-based catalyst inks to manufacture the catalyst-coated membranes. Especially, sulfonated poly(arylene ether ketone) with symmetric tetramethyl groups (SPAEK-TM) demonstrates superior performance and durability as ionomer in catalyst layers. SPAEK-TM-based membrane electrode assembly (SPAEK-TM-MEA) shows not only excellent catalyst layer morphology, but also outstanding active electrochemical surface area (50.36 m2 gPt−1). SPAEK-TM-MEA also exhibits a superior power density, which is 92 mW cm−2 in direct methanol fuel cell (DMFC) and 514 mW cm−2 in H2/air PEMFC. After 3000 degradation cycles, there is only 8.56% loss of the maximum power density for SPAEK-TM-MEA in H2/air PEMFC, which is lower than the loss of Nafion-MEA (14.6%). Furthermore, the incorporation of SPAEK-TM ionomer can effectively inhibit methanol permeability in DMFC. These results illustrate that hydrocarbon ionomer not only displays the superior power density, but also exhibits an excellent durability than Nafion® ionomer for hydrocarbon PEM-based MEA for PEMFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Cathode catalyst layer design with gradients of ionomer distribution for proton exchange membrane fuel cells10.1016/j.enconman.2018.06.078 ↗
2. Effects of Pt and ionomer ratios on the structure of catalyst layer: a theoretical model for polymer electrolyte fuel cells10.1016/j.jpowsour.2017.11.026 ↗
3. Electrocatalysts for PEM fuel cells
4. Enhanced proton conductivity of sulfonated hybrid poly(arylene ether ketone) membranes by incorporating an amino-sulfo bifunctionalized metal-organic framework for direct methanol fuel cells10.1021/acsami.7b17299 ↗
5. Enhancement of fuel cell performance of sulfonated poly(arylene ether ketone) membrane using different crosslinkers10.1016/j.memsci.2018.09.023 ↗
6. Enhancing the selectivity of Nafion membrane by incorporating a novel functional skeleton molecule to improve the performance of direct methanol fuel cells10.1039/C9TA10215A ↗
7. A high-performance membrane electrode assembly for polymer electrolyte membrane fuel cell with poly(arylene ether sulfone) nanofibers as effective membrane reinforcements10.1016/j.jpowsour.2019.227250 ↗
8. 1,2,4-Triazole functionalized poly(arylene ether ketone) for high temperature proton exchange membrane with enhanced oxidative stability10.1016/j.memsci.2017.09.072 ↗
9. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
10. Hydrocarbon proton conducting polymers for fuel cell catalyst layers10.1039/c0ee00638f ↗
11. Nafion based semi-interpenetrating polymer network membranes from a cross-linkable SPAEK and a fluorinated epoxy resin for DMFCs10.1016/j.electacta.2019.134873 ↗
12. Dissolution of Nafion® membrane and recast Nafion® film in mixtures of methanol and water10.1016/j.jpowsour.2003.08.024 ↗
13. Sulfonated poly(arylene ether sulfone) as an electrode binder for direct methanol fuel cell10.1016/j.electacta.2007.01.049 ↗
14. The effect of sulfonated poly(ether ether ketone) as an electrode binder for direct methanol fuel cell (DMFC)10.1016/j.jpowsour.2006.01.075 ↗
15. Proton exchange membrane fuel cell from low temperature to high temperature: material challenges10.1016/j.jpowsour.2007.02.065 ↗
16. Hydrocarbon-based electrode ionomer for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.03.003 ↗
17. Water-alcohol dispersible and self-cross-linkable sulfonated poly(ether ether ketone): application as ionomer for direct methanol fuel cell catalyst layer10.1016/j.ijhydene.2019.12.153 ↗
18. Directly copolymerized partially fluorinated disulfonated poly(arylene ether sulfone) random copolymers for PEM fuel cell systems: synthesis, fabrication and characterization of membranes and membrane–electrode assemblies for fuel cell applications10.1016/j.memsci.2007.01.036 ↗
19. Proton exchange membrane for DMFC and H2/air fuel cells: synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers10.1016/j.memsci.2007.04.004 ↗
20. Dependence of the performance of a high-temperature polymer electrolyte fuel cell on phosphoric acid-doped polybenzimidazole ionomer content in cathode catalyst layer10.1016/j.jpowsour.2007.03.082 ↗
21. Gas diffusion electrodes containing sulfonated polyether ionomers for PEFCs10.1016/j.electacta.2007.08.054 ↗
22. Microstructure–performance relationships of sPEEK-based catalyst layers10.1149/1.3454735 ↗
23. Proton-conductive aromatic ionomers containing highly sulfonated blocks for high-temperature-operable fuel cells10.1002/anie.200905355 ↗
24. Polybenzimidazole block sulfonated poly(arylene ether sulfone) ionomers10.1039/c1cc12266e ↗
25. Fuel cell cathode catalyst layers from “green” catalyst inks10.1039/b808613n ↗
26. A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells10.1002/anie.200806299 ↗
27. Alcohol-soluble, sulfonated poly(arylene ether)s: investigation of hydrocarbon ionomers for proton exchange membrane fuel cell catalyst layers10.1149/2.0251506jes ↗
28. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
29. Novel catalyst layer synthesized by an in situ sol–gel process with tetraethoxysilane in a Nafion ionomer solution with Pt/C for PEFCs: the effect of self-assembled Nafion–SiO2 on Pt ORR activity and an increased water content in the polymer membranes10.1039/c2ra20796f ↗
30. Benzene adsorption: a significant inhibitor for the hydrogen oxidation reaction in alkaline conditions10.1021/acs.jpclett.7b02228 ↗
31. Rational design of polyaromatic ionomers for alkaline membrane fuel cells with >1 W cm−2 power density10.1039/C8EE02192A ↗
32. How does a small structural change of anode ionomer make a big difference in alkaline membrane fuel cell performance?10.1039/C9TA10157H ↗
33. Direct synthesis of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) proton exchange membranes for fuel cell application10.1016/j.polymer.2005.04.067 ↗
34. Preparation and characterization of sulfonated poly(ether ether ketone ketone) proton exchange membranes for fuel cell application10.1016/j.memsci.2005.01.046 ↗
35. Morphological investigations of block sulfonated poly(arylene ether ketone) copolymers as potential proton exchange membranes10.1002/pat.1741 ↗
36. Gas transport properties of polysulphones: 2. Effect of bisphenol connector groups10.1016/0032-3861(91)90343-H ↗
37. Gas transport properties of polysulphones: 1. Role of symmetry of methyl group placement on bisphenol rings10.1016/0032-3861(91)90508-G ↗
38. Preparation of a cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane with enhanced proton conductivity and methanol resistance by introducing an ionic liquid-impregnated metal organic framework10.1021/acsami.9b09183 ↗
39. Polymer-assisted hydrothermal synthesis of highly reducible shuttle-shaped CeO2: microstructural effect on promoting Pt/C for methanol electrooxidation10.1021/cs300473e ↗
40. Methanol transport through nafion membranes electro-osmotic drag effects on potential step measurements10.1149/1.1393219 ↗
41. Effect of MEA activation method on the long-term performance of PEM fuel cell10.1016/j.apenergy.2019.03.157 ↗
42. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition10.1016/j.apenergy.2018.04.049 ↗