journal article·2020-06

Spherical layered Li-rich cathode material: Unraveling the role of oxygen vacancies on improving lithium ion conductivity

Zhen Wang, Xiaoyan Lin, Junting Zhang, Dong Wang, Chunyan Ding, Yongming Zhu, Peng Gao, Xiaoxiao Huang, Guangwu Wen

Publisher page

Abstract

Abstract The commercialization of layered lithium-rich manganese oxide material (LLMO) suffers from low conductivity, poor cycling performance, and complicated synthetic techniques. Herein, we develop a low-cost, short-time, and simple low-temperature combustion synthesis (LCS) method for massive production of spherical LLMO material with high oxygen vacancy concentration. In our LCS method, the microstructure and oxygen vacancy concentration of the products are controllable by regulating the dosage of fuel (i.e., urea). Positron annihilation and electron paramagnetic resonance both accurately characterize oxygen vacancy in materials with different urea dosages. When the dosage of urea is 1.5 times of stoichiometric ratio, both the free electron density and oxygen vacancy concentration of the obtained U1.5@LLMO are the highest, which are favorable for rapid transfer of electrons and ions. At rate of 1 C, the average discharge capacity of U1.5@LLMO is 185 mAh g−1 with a high capacity retention of 94.33% after 100 cycles. The corresponding lithium ion diffusion is 1.346*10−12 cm2 S−1, much higher than those of other samples. DFT calculation demonstrated that the electrochemical activity of Li+ increased significantly with the increase of oxygen vacancy concentration. This powerful LCS method for the production of LLMO with excellent electrochemical properties shows great potentials for large-scale applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. A flexible nanostructured paper of a reduced graphene oxide-sulfur composite for high-performance lithium-sulfur batteries with unconventional configurations10.1002/adma.201602262 ↗
3. Thermodynamic properties of the intermetallic systems lithium-antimony and lithium-bismuth
4. Lithium batteries and cathode materials10.1021/cr020731c ↗
5. Synthesis and characterization of LiNi1-x-yCoxMnyO2 as the cathode materials of secondary lithium batteries10.1016/S0378-7753(99)00221-9 ↗
6. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
7. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
8. Synthesis and electrochemical performance of LiNi0.7Co0.15Mn0.15O2 as gradient cathode material for lithium batteries10.1016/j.materresbull.2012.08.002 ↗
9. Layered cathode materials Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 for lithium-ion batteries10.1149/1.1407994 ↗
10. Mitigating voltage decay of Li-rich cathode material via increasing Ni content for lithium-ion batteries10.1021/acsami.6b06733 ↗
11. Li2MnO3-stabilized LiMO2 (M= Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
12. A high-capacity O2-type Li-rich cathode material with a single-layer Li2MnO3 superstructure10.1002/adma.201707255 ↗
13. Countering the voltage decay in high capacity xLi2MnO3•(1-x) LiMO2 electrodes (M= Mn, Ni, Co) for Li+-Ion batteries
14. Evolution of redox couples in Li-and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release10.1038/s41560-018-0207-z ↗
15. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
16. Nanoarchitecture multi-structural cathode materials for high capacity lithium batteries10.1002/adfm.201200536 ↗
17. Understanding the rate capability of high-energy-density Li-rich layered Li1.2Ni0.15Co0.1Mn0.55O2 cathode materials10.1002/aenm.201300950 ↗
18. Li-and Mn‐rich cathode materials: challenges to commercialization10.1002/aenm.201601284 ↗
19. Understanding voltage decay in lithium-excess layered cathode materials through oxygen-centred structural arrangement10.1038/s41467-018-05802-4 ↗
20. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
21. Stabilizing Li-rich layered cathode materials by nanolayer-confined crystal growth for Li-ion batteries
22. Surface modification with oxygen vacancy in Li-rich layered oxide Li1.2Mn0.54Ni0.13Co0.13O2 for lithium-ion batteries10.1016/j.jmst.2018.12.021 ↗
23. Carbon dioxide directly induced oxygen vacancy in the surface of lithium-rich layered oxides for high-energy lithium storage10.1016/j.jpowsour.2019.05.069 ↗
24. Uncovering the roles of oxygen vacancies in cation migration in lithium excess layered oxides10.1039/C4CP01799D ↗
25. Role of oxygen vacancies in photocatalytic water oxidation on ceria oxide: experiment and DFT studies10.1016/j.apcatb.2017.10.049 ↗
26. Ferroelectricity induced by oxygen vacancies in relaxors with perovskite structure10.1103/PhysRevB.98.094102 ↗
27. Semiempirical computational study of oxygen vacancies in a decahedral anatase nanoparticle10.1002/qua.25806 ↗
28. Laser modification-induced NiCo2O4-δ with high exterior Ni3+/Ni2+ ratio and substantial oxygen vacancies for electrocatalysis10.1016/j.electacta.2018.11.111 ↗
29. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals10.1126/science.1200448 ↗
30. Rapid formation of black titania photoanodes: pulsed laser-induced oxygen release and enhanced solar water splitting efficiency10.1039/C4TA00557K ↗
31. Tuning defects in oxides at room temperature by lithium reduction10.1038/s41467-018-03765-0 ↗
32. A new approach to prepare highly active and stable black titania for visible light-assisted hydrogen production10.1039/C5EE02443A ↗
33. Simultaneous surface coating and chemical activation of the Li-rich solid solution lithium rechargeable cathode and its improved performance10.1016/j.electacta.2013.09.042 ↗
34. Atomic structure of a lithium-rich layered oxide material for lithium-ion batteries: evidence of a solid solution10.1021/cm200831c ↗
35. Electrochemical characterization of Li2MnO3-Li[Ni1/3Co1/3Mn1/3]O2-LiNiO2 cathode synthesized via co-precipitation for lithium secondary batteries10.1016/j.jpowsour.2008.10.035 ↗
36. Effect of synthetic routes on the rate performance of Li-rich layered Li1.2Mn0.56Ni0.12Co0.12O210.1039/C4TA06552B ↗
37. Understanding the role of Ni in stabilizing the lithium-rich high-capacity cathode material Li[NixLi(1-2x)/3Mn(2-x)/3]O2 (0≤ x≤ 0.5)10.1021/cm501664y ↗
38. Enhancing the kinetics of Li-rich cathode materials through the pinning effects of gradient surface Na+ doping10.1002/aenm.201501914 ↗
39. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗
40. Anomalous interfacial lithium storage in graphene/TiO2 for lithium ion batteries10.1021/am5050423 ↗
41. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗
42. Krause-Rehberg · 1999
43. Charging-induced defect formation in LixCoO2 battery cathodes studied by positron annihilation spectroscopy10.1063/1.4801998 ↗
44. Positron lifetime calculation for the elements of the periodic table10.1088/0953-8984/19/17/176222 ↗
45. First-cycle defect evolution of Li1-xNi1/3Mn1/3Co1/3O2 lithium ion battery electrodes investigated by positron annihilation spectroscopy10.1016/j.jpowsour.2016.10.050 ↗
46. Insight into cobalt-doping in Li2FeSiO4 cathode material for lithium-ion battery10.1016/j.jpowsour.2014.10.048 ↗
47. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
48. Crystal habit-tuned nanoplate material of Li[Li1/3-2x/3NixMn2/3-x/3]O2 for high-rate performance lithium-ion batteries10.1002/adma.201001578 ↗
49. Tailoring the morphology of LiCoO2: a first principles study10.1021/cm9008943 ↗
50. Three-dimensional evaluation of compositional and structural changes in cycled LiNi1/3Co1/3Mn1/3O2 by atom probe tomography10.1016/j.jpowsour.2018.01.042 ↗
51. Layered oxides-LiNi1/3Co1/3Mn1/3O2 as anode electrode for symmetric rechargeable lithium-ion batteries10.1016/j.jpowsour.2017.12.043 ↗
52. Direct visualization of the reversible O2-/O- redox process in Li-rich cathode materials10.1002/adma.201705197 ↗
53. Characterizing oxygen local environments in paramagnetic battery materials via 17O NMR and DFT calculations10.1021/jacs.6b05747 ↗
54. Selecting substituent elements for Li-rich Mn-based cathode materials by density functional theory (DFT) calculations10.1021/acs.chemmater.5b00875 ↗
55. Understanding the electrochemical properties of Li-rich cathode materials from first-principles calculations10.1021/acs.jpcc.5b09948 ↗