journal article·2019-02

Graphene oxide synthesis using microwave-assisted vs. modified Hummer's methods: Efficient fillers for improved ionic conductivity and suppressed methanol permeability in alkaline methanol fuel cell electrolytes

Wei-Ting Chang, Yu-Hao Chao, Chen-Wei Li, Kai-Lun Lin, Jia-Jie Wang, S. Rajesh Kumar, Shingjiang Jessie Lue

Publisher page

Abstract

Abstract This research investigates the structure and characteristics of microwave-assisted graphene oxide (denoted as MGO) nanofillers and their effect as membrane electrolyte assembly for direct alkaline methanol fuel cell (DAMFC). Two types of GO nanosheets are fabricated: MGO and modified Hummer's method (denoted as NGO). The MGO contained less oxygen (i.e. higher C/O ratio) and higher D/G band ratio than NGO, indicating the microwave method yielded less hydrophilic GO with more sp3 C-C bonds than NGO sample. The shorter reaction time (20 min) of the microwave method also generated larger GO sizes than the conventional method. The MGO contained less ether groups and more resistant to thermal degradation than NGO. One percent GO nanofillers are incorporated into polybenzimidazole (PBI) to form composite membranes, which are subsequently doped with KOH. The PBI/NGO had the highest conductivity while the PBI/MGO had the lowest permeability among the three membranes. DAMFC equipped with PBI/NGO and PBI/MGO electrolytes resulted in peak power densities of 310 and 277 mW cm−2 at 80 °C, respectively. These demonstrated power densities are significantly higher than those reported in literature. Considering the short time and facile method for MGO synthetic process, this microwave-assisted GO has potential as fillers into composite membranes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Research and development on polymeric membranes for fuel cells: an overview
2. Alkaline direct alcohol fuel cells10.1016/j.jpowsour.2009.11.145 ↗
3. Kinoshita · 1992
4. Graphene-based membranes10.1039/C4CS00423J ↗
5. Unimpeded permeation of water through helium-leak–tight graphene-based membranes10.1126/science.1211694 ↗
6. Novel bilayer well-aligned Nafion/graphene oxide composite membranes prepared using spin coating method for direct liquid fuel cells10.1016/j.memsci.2015.07.007 ↗
7. Hydroxide-ion selective electrolytes based on a polybenzimidazole/graphene oxide composite membrane10.1016/j.energy.2017.06.061 ↗
8. Preparation of graphitic oxide10.1021/ja01539a017 ↗
9. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
10. Synthesis of graphene oxide using modified Hummers method: solvent influence10.1016/j.proeng.2017.04.118 ↗
11. Mass production of graphene oxide from expanded graphite10.1016/j.matlet.2013.07.072 ↗
12. Temperature influence on the synthesis of pristine graphene oxide and graphite oxide10.1016/j.matchemphys.2015.08.024 ↗
13. XIII. On the atomic weight of graphite10.1098/rstl.1859.0013 ↗
14. Verfahren zur Darstellung der Graphitsäure10.1002/cber.18980310237 ↗
15. Chemical reduction of graphene oxide: a synthetic chemistry viewpoint10.1039/C3CS60303B ↗
16. An improved Hummers method for eco-friendly synthesis of graphene oxide10.1016/j.carbon.2013.07.055 ↗
17. Polybenzimidazole membranes modified with polyelectrolyte-functionalized multiwalled carbon nanotubes for proton exchange membrane fuel cells10.1039/c1jm10439j ↗
18. Thermally stable polybenzimidazole/carbon nano-tube composites for alkaline direct methanol fuel cell applications10.1016/j.jpowsour.2013.05.171 ↗
19. Mechanism of graphene oxide formation10.1021/nn500606a ↗
20. Permeation of xylene isomers through supported liquid membranes containing cyclodextrins10.1081/SS-120000799 ↗
21. Alkali doped polyvinyl alcohol/multi-walled carbon nano-tube electrolyte for direct methanol alkaline fuel cell10.1016/j.memsci.2011.04.026 ↗
22. Enhanced performance of a direct methanol alkaline fuel cell (DMAFC) using a polyvinyl alcohol/fumed silica/KOH electrolyte10.1016/j.jpowsour.2010.06.049 ↗
23. High-performance direct methanol alkaline fuel cells using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes10.1016/j.jpowsour.2011.10.091 ↗
24. Highly zeolite-loaded polyvinyl alcohol composite membranes for alkaline fuel-cell electrolytes
25. Permeant transport properties and cell performance of potassium hydroxide doped poly(vinyl alcohol)/fumed silica nanocomposites10.1016/j.memsci.2010.11.009 ↗
26. Novel quaternized polyvinyl alcohol/quaternized chitosan nano-composite as an effective hydroxide-conducting electrolyte10.1016/j.memsci.2015.02.043 ↗
27. Dispersion behaviour of graphene oxide and reduced graphene oxide10.1016/j.jcis.2014.05.033 ↗
28. Spontaneous formation of liquid crystals in ultralarge graphene oxide dispersions10.1002/adfm.201100448 ↗
29. High-yield preparation of graphene oxide from small graphite flakes via an improved Hummers method with a simple purification process10.1016/j.carbon.2014.10.033 ↗
30. Organic solvent-based graphene oxide liquid crystals: a facile route toward the next generation of self-assembled layer-by-layer multifunctional 3D architectures10.1021/nn305906z ↗
31. Sulfuric acid intercalated graphite oxide for graphene preparation10.1038/srep03439 ↗
32. Role of oxygen functional groups in reduced graphene oxide for lubrication10.1038/srep45030 ↗
33. Graphene/zinc nano-composites by electrochemical co-deposition10.1039/c2cp42385e ↗
34. Synthesis, characterization and models of graphene oxide
35. Structural evolution during the reduction of chemically derived graphene oxide10.1038/nchem.686 ↗
36. Reduction of graphene oxide by 100 MeV Au ion irradiation and its application as H2O2 sensor10.1088/0022-3727/48/36/365105 ↗
37. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗
38. Synthesis of graphite oxide with different surface oxygen contents assisted microwave radiation10.3390/nano8020106 ↗
39. Facile synthesis of well-dispersed graphene by [gamma]-ray induced reduction of graphene oxide10.1039/c2jm32231e ↗
40. Microwave reduction of graphene oxide rationalized by reactive molecular dynamics10.1039/C7NR00341B ↗
41. Structure of graphite oxide revisited10.1021/jp9731821 ↗
42. Synthesis of poly(aniline-co-o-anisidine)-intercalated graphite oxide composite by delamination/reassembling method10.1016/j.carbon.2005.05.008 ↗
43. Synthesis of graphene oxide (GO) by modified Hummers method and its thermal reduction to obtain reduced graphene oxide (rGO)10.4236/graphene.2017.61001 ↗
44. One-pot reduction of graphene oxide at subzero temperatures10.1039/c1cc15569e ↗
45. A one-Step, solvothermal reduction method for producing reduced graphene oxide dispersions in organic solvents10.1021/nn100511a ↗
46. Properties, degradation and high temperature fuel cell test of different types of PBI and PBI blend membranes10.1016/j.memsci.2009.10.032 ↗
47. Magnetic field-assisted alignment of graphene oxide nanosheets in a polymer matrix to enhance ionic conduction10.1016/j.memsci.2018.05.062 ↗
48. Physicochemical properties of alkaline doped polybenzimidazole membranes for anion exchange membrane fuel cells10.1016/j.memsci.2015.06.013 ↗
49. Polybenzimidazole/ionic liquid functionalized graphene oxide nanocomposite membrane for alkaline anion exchange membrane fuel cells10.1016/j.matlet.2016.03.057 ↗
50. Alkaline anion exchange membranes based on KOH-treated multilayer graphene oxide10.1016/j.memsci.2016.02.017 ↗
51. KOH-doped polybenzimidazole for alkaline direct glycerol fuel cells10.1016/j.memsci.2015.03.031 ↗
52. Durability study of KOH doped polybenzimidazole membrane for air-breathing alkaline direct ethanol fuel cell10.1016/j.jpowsour.2010.11.104 ↗
53. Enabling graphene oxide nanosheets as water separation membranes10.1021/es400571g ↗
54. Polybenzimidazole membranes for direct methanol fuel cell: acid-doped or alkali-doped?10.1016/j.jpowsour.2015.04.018 ↗
55. Recent advances in alkali-doped polybenzimidazole membranes for fuel cell applications10.1016/j.rser.2018.03.024 ↗
56. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
57. Principles and materials aspects of direct alkaline alcohol fuel cells10.3390/en3081499 ↗
58. Recent progress of carbonaceous materials in fuel cell applications: an overview10.1016/j.cej.2016.10.051 ↗
59. Pyridine- and pyrimidine-functionalized poly(sulfone)s: performance-enhancing crosslinkers for acid/base blend proton exchange membranes used in direct methanol fuel cells10.1039/C3RA44851G ↗
60. Selectivity of direct methanol fuel cell membranes10.3390/membranes5040793 ↗
61. Sulfonated graphene oxide/Nafion composite membranes for high-performance direct methanol fuel cells10.1016/j.ijhydene.2013.08.036 ↗
62. Appropriate balance between methanol yield and power density in portable direct methanol fuel cell10.1016/j.cej.2015.01.104 ↗
63. Performance of a vapor-fed polybenzimidazole (PBI)-based direct methanol fuel cell10.1021/ef8001839 ↗
64. Alkali doped polybenzimidazole membrane for alkaline direct methanol fuel cell
65. Acid‐doped polybenzimidazoles: a new polymer electrolyte10.1149/1.2044337 ↗