Optimal robust control strategy of a solid oxide fuel cell system
Source abstract
Abstract
Abstract Optimal control can ensure system safe operation with a high efficiency. However, only a few papers discuss optimal control strategies for solid oxide fuel cell (SOFC) systems. Moreover, the existed methods ignore the impact of parameter uncertainty on system instantaneous performance. In real SOFC systems, several parameters may vary with the variation of operation conditions and can not be identified exactly, such as load current. Therefore, a robust optimal control strategy is proposed, which involves three parts: a SOFC model with parameter uncertainty, a robust optimizer and robust controllers. During the model building process, boundaries of the uncertain parameter are extracted based on Monte Carlo algorithm. To achieve the maximum efficiency, a two-space particle swarm optimization approach is employed to obtain optimal operating points, which are used as the set points of the controllers. To ensure the SOFC safe operation, two feed-forward controllers and a higher-order robust sliding mode controller are presented to control fuel utilization ratio, air excess ratio and stack temperature afterwards. The results show the proposed optimal robust control method can maintain the SOFC system safe operation with a maximum efficiency under load and uncertainty variations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Advanced Control Systems Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Control strategy for power management, efficiency-optimization and operating-safety of a 5-kW solid oxide fuel cell system10.1016/j.electacta.2015.02.045 ↗
2. Dynamic modeling and analysis of a 5-kW solid oxide fuel cell system from the perspectives of cooperative control of thermal safety and high efficiency10.1016/j.ijhydene.2014.10.149 ↗
3. Dynamic modeling and experimental validation for the electrical coupling in a 5-cell solid oxide fuel cell stack in the perspective of thermal coupling10.1016/j.ijhydene.2011.01.032 ↗
4. A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells10.1016/j.ijhydene.2013.09.045 ↗
5. Thermal stress management of a solid oxide fuel cell using neural network predictive control10.1016/j.energy.2013.08.031 ↗
6. Model-based development of low-level control strategies for transient operation of solid oxide fuel cell systems10.1016/j.jpowsour.2011.01.023 ↗
7. Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control10.1016/j.ijhydene.2012.05.119 ↗
8. Model predictive control of the solid oxide fuel cell stack temperature with models based on experimental data10.1016/j.jpowsour.2014.11.126 ↗
9. Constrained model predictive control of a solid oxide fuel cell based on genetic optimization10.1016/j.jpowsour.2011.03.010 ↗
10. Multilinear model predictive control of solid oxide fuel cell output voltage
11. Advanced control approach for hybrid systems based on solid oxide fuel cells10.1016/j.apenergy.2015.02.059 ↗
12. Thermal management-oriented multivariable robust control of a kW-scale solid oxide fuel cell stand-alone system10.1109/TEC.2015.2510030 ↗
13. Control-oriented modeling analysis and optimization of planar solid oxide fuel cell system10.1016/j.ijhydene.2016.08.213 ↗
14. Feedback control of solid oxide fuel cell spatial temperature variation10.1016/j.jpowsour.2009.12.111 ↗
15. Robust control of solid oxide fuel cell ultracapacitor hybrid system
16. A nonlinear sliding mode observer for the estimation of temperature distribution in a planar solid oxide fuel cell10.1016/j.ijhydene.2014.10.117 ↗
17. Interval-based sliding mode control design for solid oxide fuel cells with state and actuator constraints10.1109/TIE.2015.2404811 ↗
18. Thermal management oriented steady state analysis and optimization of a kW scale solid oxide fuel cell stand-alone system for maximum system efficiency10.1016/j.ijhydene.2013.07.052 ↗
19. Modeling and model-based analysis of a solid oxide fuel cell thermal-electrical management system with an air bypass valve10.1016/j.electacta.2015.01.211 ↗
20. Thermal economic environmental analysis and multi-objective optimization of an internal-reforming solid oxide fuel cell e gas turbine hybrid system10.1016/j.ijhydene.2012.09.143 ↗
21. 4E analysis and multi objective optimization of a micro gas turbine and solid oxide fuel cell hybrid combined heat and power system10.1016/j.jpowsour.2013.08.065 ↗
22. Multi-objective optimization of an indirectly integrated solid oxide fuel cell-gas turbine cogeneration system10.1016/j.ijhydene.2016.09.023 ↗
23. Multi-objective optimization of a pressurized solid oxide fuel cell – gas turbine hybrid system integrated with seawater reverse osmosis10.1016/j.energy.2017.01.127 ↗
24. Exergetic, economic, and environmental evaluations and multi-objective optimization of an internal-reforming SOFC-gas turbine cycle coupled with a Rankine cycle10.1016/j.applthermaleng.2016.07.180 ↗
25. Two strategies for multi-objective optimisation of solid oxide fuel cell stacks10.1080/14786451.2013.777337 ↗
26. Design and operation optimization of an internal reforming solid oxide fuel cell integrated system based on multi objective approach10.1016/j.applthermaleng.2016.12.013 ↗
27. Optimum power performance of a new integrated SOFC-trigeneration system by multi-objective exergoeconomic optimization10.1016/j.ijepes.2015.06.017 ↗
28. Comparative assessment and optimization of fuel cells10.1016/j.ijhydene.2014.11.050 ↗
29. Application of rolling horizon optimization to an integrated solid-oxide fuel cell and compressed air energy storage plant for zero-emissions peaking power under uncertainty10.1016/j.compchemeng.2014.06.001 ↗
30. The high efficiency cooperative control of power and temperature of a stand-Alone solid oxide fuel cell system with an air bypass valve
31. Performance improvement of a battery/PV/fuel cell/grid hybrid energy system considering load uncertainty modeling using IGDT10.1016/j.enconman.2017.05.039 ↗
32. Risk-based optimal performance of a PV/fuel cell/battery/grid hybrid energy system using information gap decision theory in the presence of demand response program10.1016/j.ijhydene.2017.02.147 ↗
33. Optimal control of fuel overpressure in a polymer electrolyte membrane fuel cell with hydrogen transfer leak during load change10.1016/j.jpowsour.2016.11.055 ↗
34. Adaptive inverse control of proton exchange membrane fuel cell using RBF neural network10.1016/S1452-3981(23)18239-3 ↗
35. Control oriented modeling of solid oxide fuel cell auxiliary power unit for transportation applications10.1115/1.3081475 ↗
36. Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-generation system10.1016/j.ijhydene.2011.06.147 ↗
37. Cooperative control of a nonuniform gantry crane with constrained tension10.1016/j.automatica.2015.12.026 ↗
38. U.S. distributed generation fuel cell program10.1016/j.jpowsour.2004.01.021 ↗
39. Uncertainty of measurement by Monte-Carlo simulation and metrological reliability in the evaluation of electric variables of PEMFC and SOFC fuel cells10.1016/j.measurement.2009.08.005 ↗
40. Minimax optimal designs via particle swarm optimization methods10.1007/s11222-014-9466-0 ↗
41. Continuous higher-order sliding mode control with time-varying gain for a class of uncertain nonlinear systems10.1016/j.isatra.2016.02.005 ↗