Evaluating electrolyte additives for lithium-ion cells: A new Figure of Merit approach
Source abstract
Abstract
Abstract Electrolyte additives are known to improve the performance of lithium-ion cells. In this work we examine the performance of Li 1.03 Ni 0.5 Mn 0.3 Co 0.3 O 2 -graphite (NMC532/Gr) cells containing combinations of lithium bis(oxalate)borate (LiBOB), vinylene carbonate (VC), trivinylcyclotriboroxane (tVCBO), prop-1-ene-1,3-sultone (PES), phenyl boronic acid ethylene glycol ester (PBE), tris(trimethylsilyl) phosphite (TMSPi), triethyl phosphite (TEPi), and lithium difluoro(oxalate)borate (LiDFOB) added to our baseline (1.2 M LiPF 6 in EC:EMC, 3:7 w/w) electrolyte. In order to rank performance of the various electrolytes, we developed two separate figures of merit (FOM), which are based on the energy retention and power retention of the cells. Using these two metrics in conjunction, we show that only one of the fifteen electrolyte formulations tested significantly outperforms the baseline electrolyte: this electrolyte contains the 0.25 wt% tVCBO + 1 wt% TMSPi additive mix. Little correlation was observed between the FOMs for energy retention and power retention, which indicates that the mechanisms that govern these performance parameters are likely independent of each other. Our FOM approach has general applicability and can be used to develop electrolyte and electrode formulations that prolong the life of lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
3. Correlation between dissolution behavior and electrochemical cycling performance for LiNi1/3Co1/3Mn1/3O2-based cells10.1016/j.jpowsour.2012.01.122 ↗
4. The influence of different conducting salts on the metal dissolution and capacity fading of NCM cathode material10.1016/j.electacta.2014.04.091 ↗
5. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
6. Cycling behavior of NCM523/graphite lithium-ion cells in the 3–4.4 V range: diagnostic studies of full cells and harvested electrodes10.1149/2.0081701jes ↗
7. Mitigating performance degradation of high-capacity lithium-ion cells with boronate-based electrolyte additives10.1149/2.0081410jes ↗
8. Modification of Ni-Rich FCG NMC and NCA cathodes by atomic layer deposition: preventing surface phase transitions for high-voltage lithium-ion batteries10.1038/srep26532 ↗
9. Aging Analysis of graphite/LiNi1/3Mn1/3Co1/3O2 cells using XRD, PGAA, and AC impedance10.1149/2.0721514jes ↗
10. On leakage current measured at high cell voltages in lithium-ion batteries10.1149/2.1341702jes ↗
11. Studies of gas generation, gas consumption and impedance growth in Li-Ion cells with carbonate or fluorinated electrolytes using the pouch bag method10.1149/2.1091702jes ↗
12. Influence of manganese(II), cobalt(II), and nickel(II) additives in electrolyte on performance of graphite anode for lithium-ion batteries10.1016/S0013-4686(01)00847-7 ↗
13. Mn (II) deposition on anodes and its effects on capacity fade in spinel lithium manganate–carbon systems10.1038/ncomms3437 ↗
14. Interfacial side-reactions at a LiNi0.5Mn1.5O4 electrode in organic carbonate-based electrolytes10.1016/j.elecom.2013.04.007 ↗
15. Interactions between positive and negative electrodes in Li-Ion cells operated at high temperature and high voltage10.1149/2.0951603jes ↗
16. Studies of the effect of high voltage on the impedance and cycling performance of Li[Ni0.4Mn0.4Co0.2]O2/Graphite lithium-ion pouch cells10.1149/2.0831506jes ↗
17. Ternary quaternary electrolyte additive mixtures for Li-Ion cells that promote long lifetime, high discharge rate and better safety10.1149/2.0541409jes ↗
18. Mechanistic insight in the function of phosphite additives for protection of LiNi0.5Co0.2Mn0.3O2 cathode in high voltage Li-Ion cells10.1021/acsami.6b01544 ↗
19. Tris(trimethylsilyl) phosphite as electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery10.1016/j.electacta.2014.09.157 ↗
20. Why is tris(trimethylsilyl) phosphite effective as an additive for high-voltage lithium-ion batteries?10.1039/C5TA01253H ↗
21. 5V-class high-voltage batteries with over-lithiated oxide and a multi-functional additive10.1039/C4TA06531J ↗
22. A bi-functional lithium difluoro(oxalato)borate additive for lithium cobalt oxide/lithium nickel manganese cobalt oxide cathodes and silicon/graphite anodes in lithium-ion batteries at elevated temperatures
23. Positive electrode passivation by LiDFOB electrolyte additive in high-capacity lithium-ion cells10.1149/2.083212jes ↗
24. Graphite/electrolyte interface formed in LiBOB-based electrolytes: II. Potential dependence of surface chemistry on graphitic anodes10.1149/1.1812732 ↗
25. Comparison of the thermal stability of lithiated graphite in LiBOB EC/DEC and in LiPF6 EC/DEC10.1149/1.1592911 ↗
26. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
27. the effect of vinylene carbonate additive on surface film formation on both electrodes in Li-Ion batteries10.1149/1.3029674 ↗
28. D. Abraham, Y. Zhu, Electrolyte compositions for high voltage lithium-ion batteries. US Patent 20,160,099,484: 2016.
29. Understanding the role of prop-1-ene-1,3-sultone and vinylene carbonate in LiNi1/3Mn1/3Co1/3O2/graphite pouch cells: electrochemical, GC-MS and XPS analysis10.1149/2.0741512jes ↗
30. Improving cyclic stability of lithium nickel manganese oxide cathode for high voltage lithium ion battery by modifying electrode/electrolyte interface with electrolyte additive10.1016/j.electacta.2014.09.151 ↗
31. Fluorinated electrolyte for 4.5 V Li(Ni0.4Mn0.4Co0.2)O2/graphite Li-ion cells10.1016/j.jpowsour.2015.12.132 ↗
32. Aerobic alcohol oxidation coupled to palladium-catalyzed alkene hydroarylation with boronic esters10.1002/anie.200705317 ↗
33. Effect of impurities and moisture on lithium bisoxalatoborate (LiBOB) electrolyte performance in lithium-ion cells10.1016/j.jpowsour.2009.09.056 ↗
34. Enabling high-energy, high-voltage lithium-ion cells: standardization of coin-cell assembly, electrochemical testing, and evaluation of full cells10.1149/2.0691614jes ↗
35. An accelerated calendar and cycle life study of Li-ion cells10.1016/S0378-7753(01)00783-2 ↗
36. Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in lithium-ion full cells10.1149/2.1111702jes ↗
37. Lifetime limit of tris(trimethylsilyl) phosphite as electrolyte additive for high voltage lithium ion batteries10.1039/C6RA06555D ↗
38. Interpreting high precision coulometry results on Li-ion cells10.1149/1.3625232 ↗
39. Tris (trimethylsilyl) Phosphite (TMSPi) and Triethyl Phosphite (TEPi) as Electrolyte Additives for Lithium Ion Batteries: Mechanistic Insights into Differences during LiNi0. 5Mn0. 3Co0. 2O2-Graphite Full Cell Cycling10.1149/2.1101707jes ↗
40. Performance of high-power lithium-ion cells under pulse discharge and charge conditions10.1002/er.1665 ↗
41. A systematic study of electrolyte additives in Li[Ni1/3Mn1/3Co1/3]O2 (NMC)/Graphite pouch cells10.1149/2.0511412jes ↗