journal article·2013-04

Quantitative analysis of the performance impact of low-level carbon monoxide exposure in proton exchange membrane fuel cells

Guido Bender, Michael Angelo, Keith Bethune, Richard Rocheleau

Publisher page

Abstract

The performance effect of the hydrogen fuel contaminant carbon monoxide (CO) for dry gas concentrations ranging from 1 to 10 ppm in proton exchange membrane fuel cells (PEMFCs) is reported. Performance loss is investigated for different operating conditions including several temperatures, anode relative humidities, and current densities. An analytical method is presented to quantify performance loss due to CO exposure (Δη), the time required to attain steady state of the CO reaction mechanism (ttrans), and the effectiveness of cell performance recovery in neat hydrogen. For select experiments, the magnitude of conversion of CO to carbon dioxide (CO2) at steady state (ξCO) is quantified with gas chromatography. The results show (i) Δη is greatest at high CO concentrations, high current density, and low anode relative humidity, (ii) oxygen crossover from the cathode decreases Δη, and (iii) ξCO is higher at a temperature of 60 °C than 80 °C. The latter may be attributed to an increased amount of liquid water in the cell increasing the oxygen crossover. The data also shows that recovery in neat hydrogen was typically complete. A summary of all experimental results of Δη is given in Appendix B as fitting equations and parameters to assist in cell performance model development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Hogarth · J. Power Sources · 2005 · 142 · 22310.1016/j.jpowsour.2004.11.020 ↗
2. Ralph · Platinum Met. Rev. · 1999 · 43 · 1410.1595/003214099X4311417 ↗
3. Cheng · J. Power Sources · 2007 · 165 · 73910.1016/j.jpowsour.2006.12.012 ↗
4. Springer · J. Electrochem. Soc. · 2001 · 148 · A1110.1149/1.1344516 ↗
5. St-Pierre · J. Electrochem. Soc. · 2009 · 156 · B29110.1149/1.3043419 ↗
6. SAE TIR J2719 · 2005
7. Bender · J. Power Sources · 2009 · 193 · 71310.1016/j.jpowsour.2009.04.028 ↗
8. Zhai · ECS Trans. · 2008 · 16 · 87310.1149/1.2981926 ↗
9. Uribe · J. Electrochem. Soc. · 2002 · 149 · A29310.1149/1.1447221 ↗
10. Halseid · J. Power Sources · 2006 · 154 · 34310.1016/j.jpowsour.2005.10.011 ↗
11. Baschuk · Int. J. Energy Res. · 2001 · 25 · 69510.1002/er.713 ↗
12. Camara · J. Electrochem. Soc. · 2002 · 149 · A74810.1149/1.1473775 ↗
13. Jiménez · J. Power Sources · 2005 · 151 · 6910.1016/j.jpowsour.2005.02.049 ↗
14. Gu · Appl. Catal. B: Environ. · 2005 · 56 · 4310.1016/j.apcatb.2004.08.016 ↗
15. T. Kawaguchi, W. Sugimoto, Y. Murakami, Y. Takasu, Abs. 31, 206th Meeting of the Electrochemical Society, 2004.
16. Ioroi · Phys. Chem. Chem. Phys. · 2002 · 4 · 233710.1039/b111652e ↗
17. Zhang · J. Electrochem. Soc. · 2002 · 149 · A76510.1149/1.1475686 ↗
18. Ralph · Platinum Metals Rev. · 2002 · 46 · 11710.1595/003214002X463117135 ↗
19. Basura · J. Electrochem. Soc. · 2001 · 501 · 77
20. Ma · Solid State Ionics · 2007 · 178 · 61510.1016/j.ssi.2007.01.030 ↗
21. Broka · J. Appl. Electrochem. · 1997 · 27 · 11710.1023/A:1018469520562 ↗
22. Shim · J. Electrochem. Soc. · 2009 · 156 · B69010.1149/1.3110985 ↗