journal article·2013-11

Electrochemical properties of an all-solid-state lithium-ion battery with an in-situ formed electrode material grown from a lithium conductive glass ceramics sheet

Yuichi Amiki, Fumihiro Sagane, Kazuo Yamamoto, Tsukasa Hirayama, Masao Sudoh, Munekazu Motoyama, Yasutoshi Iriyama

Publisher page

Abstract

Abstract A lithium insertion reaction in a Li + conductive glass ceramics solid electrolyte (lithium aluminum titanium phosphate: LATP) sheet produces an in-situ formed electrode active material, which operates at 2.35 V vs. Li/Li + in the vicinity of the LATP-sheet/current–collector interface. Electron energy loss spectroscopy clarifies that titanium in the LATP sheet in the vicinity of the current collector/LATP-sheet interface is preferentially reduced by this lithium insertion reaction. Charge transfer resistance between the in-situ-formed-electrode and the LATP-sheet is less than 100 Ω cm 2 , which is smaller than that of the common LiPON/LiCoO 2 interface. A thin film of LiCoO 2 is deposited on one side of the LATP-sheet as a Li + source for developing the in-situ formed electrode material. Eventually, a Pt/LATP-sheet/LiCoO 2 /Au multilayer is fabricated. The multilayer structure successfully works as an all-solid-state lithium-ion battery operating at 1.5 V. A redox peak of the battery is observed even at 100 mV s −1 in the potential sweep curve. Additionally, charge–discharge reactions are repeated stably even after 25 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Ohta · Adv. Mater. · 2006 · 18 · 222610.1002/adma.200502604 ↗
2. Ohta · Electrochem. Commun. · 2007 · 9 · 148610.1016/j.elecom.2007.02.008 ↗
3. Sakuda · Chem. Mater. · 2010 · 22 · 94910.1021/cm901819c ↗
4. T. Kato, T. Hamanaka, F. Sagane, K. Yamamoto, T. Hirayama, M. Motoyama, and Y. Iriyama, submitted for publication.
5. Inaguma · Solid State Commun. · 1993 · 86 · 68910.1016/0038-1098(93)90841-A ↗
6. Birke · J. Electrochem. Soc. · 1997 · 144 · L16710.1149/1.1837713 ↗
7. http://www.ohara-inc.co.jp/jp/product/electronics/licgc.html.
8. Iriyama · Electrochem. Commun. · 2006 · 8 · 128710.1016/j.elecom.2006.03.003 ↗
9. Yada · Electrochem. Commun. · 2009 · 11 · 41310.1016/j.elecom.2008.12.004 ↗
10. Iriyama · J. Power Sources · 2005 · 146 · 74510.1016/j.jpowsour.2005.03.073 ↗
11. Fu · J. Am. Ceram. Soc. · 1997 · 80 · 190110.1111/j.1151-2916.1997.tb03070.x ↗
12. https://www.ornl.gov/ccsd_registrations/battery/presentations/Session8-240-Nakajima.pdf.
13. Abe · J. Electrochem. Soc. · 2005 · 152 · A215110.1149/1.2042907 ↗
14. Yamamoto · Angew. Chem. Int. Ed. · 2010 · 49 · 441410.1002/anie.200907319 ↗
15. Yamamoto · Electrochem. Commun. · 2012 · 20 · 11310.1016/j.elecom.2012.04.013 ↗
16. Delmas · Mater. Res. Bull. · 1988 · 23 · 6510.1016/0025-5408(88)90226-7 ↗
17. Patoux · Chem. Mater. · 2002 · 14 · 505710.1021/cm0201798 ↗
18. Ohtomo · Nature · 2002 · 419 · 37810.1038/nature00977 ↗
19. Mizushima · Mat. Res. Bull. · 1980 · 15 · 78310.1016/0025-5408(80)90012-4 ↗