journal article·2020-11Open access

Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in Zirconia II: Interfacial thermodynamics and transport mechanisms

Robson L. Grosso, K.S.N. Vikrant, Lin Feng, Eliana N.S. Muccillo, Dereck N.F. Muche, Gowtham S. Jawaharram, Christopher M. Barr, Anthony M. Monterrosa, Ricardo H.R. Castro, R. Edwin García, Khalid Hattar, Shen J. Dillon

Acta Materialia· Volume 200

Abstract

Abstract This work uses a combination of stress dependent single grain boundary Coble creep and zero-creep experiments to measure interfacial energies, along with grain boundary point defect formation and migration volumes in cubic ZrO2. These data, along with interfacial diffusivities measured in a companion paper are then applied to analyzing two-particle sintering. The analysis presented indicates that the large activation volume, v * = v f + v m primarily derives from a large migration volume and suggests that the grain boundary rate limiting defects are delocalized, possibly due to electrostatic interactions between charge compensating defects. The discrete nature of the sintering and creep process observed in the small-scale experiments supports the hypothesis that grain boundary dislocations serve as sources and sinks for grain boundary point defects and facilitate strain during sintering and Coble creep. Model two-particle sintering experiments demonstrate that initial-stage densification follows interface reaction rate-limited kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Grain boundaries in dielectric and mixed-conducting ceramics10.1016/S1359-6454(99)00367-5 ↗
2. Oxygen and aluminum diffusion in α-Al2O3: How much do we really understand?10.1016/j.jeurceramsoc.2007.12.020 ↗
3. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
4. Measuring and interpreting the structure of grain-boundary networks10.1111/j.1551-2916.2011.04384.x ↗
5. Grain growth anomaly in strontium titanate10.1016/j.scriptamat.2009.05.028 ↗
6. How grain growth stops: A mechanism for grain-growth stagnation in pure materials10.1126/science.1187833 ↗
7. Grain boundary interface roughening transition and its effect on grain boundary mobility for non-faceting boundaries10.1016/j.scriptamat.2007.07.045 ↗
8. Comparison of phase-field and Potts models for coarsening processes10.1016/S1359-6454(98)00313-9 ↗
9. Influence of externally imposed and internally generated electrical fields on grain growth, diffusional creep, sintering and related phenomena in ceramics10.1111/j.1551-2916.2011.04652.x ↗
10. Spark plasma sintering of alumina10.1111/j.1151-2916.2002.tb00381.x ↗
11. Plastic deformation of fine-grained alumina (Al2O3): I, interface-controlled diffusional creep10.1111/j.1151-2916.1980.tb10648.x ↗
12. Codoping of alumina to enhance creep resistance10.1111/j.1151-2916.1999.tb01947.x ↗
13. Grain boundary electronic structure related to the high-temperature creep resistance in polycrystalline Al2O310.1016/S1359-6454(02)00122-2 ↗
14. Deformation of fine-grained alumina by grain boundary sliding accommodated by slip10.1016/S1359-6454(03)00180-0 ↗
15. The oxidation of NiAl: What can we learn from ab initio calculations?10.1146/annurev.matsci.35.101503.091652 ↗
16. Optimization of reactive-element additions to improve oxidation performance of alumina-forming alloys10.1111/j.1151-2916.2003.tb03358.x ↗
17. On the growth of Al2O3 scales10.1016/j.actamat.2013.07.024 ↗
18. A disconnection mechanism of enhanced grain boundary diffusion in Al2O310.1016/j.scriptamat.2015.01.026 ↗
19. Equation of motion for a grain boundary10.1103/PhysRevLett.119.246101 ↗
20. Flash sintering of nanograin zirconia in <5 s at 850°C10.1111/j.1551-2916.2010.04089.x ↗
21. Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics10.1002/anie.201605443 ↗
22. The effects of external fields in ceramic sintering10.1111/jace.16061 ↗
23. Fast firing - microstructural benefits
24. Full sintering of powdered-metal bodies in a microwave field10.1038/21390 ↗
25. Quantitative analysis for in situ sintering of 3% yttria-stabilized zirconia in the transmission electron microscope10.1016/j.ultramic.2014.12.011 ↗
26. A general method to synthesize and sinter bulk ceramics in seconds10.1126/science.aaz7681 ↗
27. Probing the densification mechanisms during flash sintering of ZnO10.1016/j.actamat.2016.12.015 ↗
28. Ultra-fast firing: Effect of heating rate on sintering of 3YSZ, with and without an electric field10.1016/j.jeurceramsoc.2017.01.033 ↗
29. Vikrant, K.S.N., et al., Ultrahigh Temperature in situ Transmission Electron Microscopy based Bicrystal Coble Creep in Zirconia I: Nanowire Growth and Interfacial Diffusivity. Submitted.
30. Ionic conductivity and phase stability of spark plasma sintered scandia and ceria-stabilized zirconia10.1016/j.ssi.2012.08.006 ↗
31. Microwave sintering of CeO2 and Y2O3 co-stabilised ZrO2 from stabiliser-coated nanopowders10.1016/j.jeurceramsoc.2006.04.040 ↗
32. Particle Rearrangement and Pore Space Coarsening During Solid-State Sintering10.1111/j.1551-2916.2009.02978.x ↗
33. Initial Sintering of Alumina and Hematite10.1111/j.1151-2916.1958.tb13519.x ↗
34. Dislocation mechanism of interface point defect migration10.1103/PhysRevB.82.193404 ↗
35. On interface-reaction control of Nabarro-Herring creep and sintering10.1016/0036-9748(69)90191-4 ↗
36. Quantitative comparison of sink efficiency of Cu–Nb, Cu–V and Cu–Ni interfaces for point defects10.1016/j.actamat.2014.09.011 ↗
37. On the mechanisms of point-defect absorption by grain and twin boundaries10.1080/01418618008239372 ↗
38. Grain-boundary kinetics: A unified approach10.1016/j.pmatsci.2018.05.004 ↗
39. Constitutive modelling of the densification of micron-grain-sized alumina ceramics10.1080/1478643031000107267 ↗
40. Direct microwave sintering of pure alumina in a single mode cavity: Grain size and phase transformation effects10.1016/j.actamat.2016.06.027 ↗
41. Diffusion of Zn along tilt grain boundaries in Al: pressure and orientation dependence10.1016/S1359-6454(01)00210-5 ↗
42. The effect of pressure on indium diffusion along <001>tilt grain boundaries in copper bicrystals10.1023/A:1008655917948 ↗
43. Grain-boundary diffusion coefficient in α-Al2O3 from spark plasma sintering tests: Evidence of collective motion of charge disconnections10.1016/j.ceramint.2018.07.073 ↗
44. A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials10.1063/1.1702656 ↗
45. Structure and Mobility of Dissociated Vacancies at Twist Grain Boundaries and Screw Dislocations in Ionic Rocksalt Compounds10.1021/acs.chemmater.7b05172 ↗
46. The effect of pressure on self-diffusion in carbon disulfide10.1063/1.1698872 ↗
47. Exact solution for the zero creep load of a wire10.1016/0956-7151(93)90388-9 ↗
48. The surface tension of solid copper10.1007/BF03398093 ↗
49. Phase stability in scandia-zirconia nanocrystals10.1111/jace.14710 ↗
50. Sintering of translucent and single-phase nanostructured scandia-stabilized zirconia10.1016/j.matlet.2019.06.076 ↗
51. Threshold displacement energy in yttria-stabilized zirconia10.1002/pssc.200673752 ↗
52. Direct least square fitting of ellipses10.1109/34.765658 ↗
53. Grosso, R.L., et al., In situ Transmission Electron Microscopy for Ultrahigh Temperature Mechanical Testing of ZrO2. Nano Lett.20: p. 1041-1046.10.1021/acs.nanolett.9b04205 ↗
54. In situ nanocompression testing of irradiated copper10.1038/nmat3055 ↗
55. Grain-boundary faceting at a = 3, [110]/{112} grain boundary in a cubic zirconia bicrystal10.1080/0141861031000108231 ↗
56. High-temperature grain boundary sliding behavior and grain boundary energy in cubic zirconia bicrystals10.1016/j.actamat.2004.01.026 ↗
57. Atomic control of the SrTiO3 crystal surface10.1126/science.266.5190.1540 ↗
58. Atomic-scale formation of ultrasmooth surfaces on sapphire substrates for high-quality thin-film fabrication10.1063/1.114313 ↗
59. Interface reaction controlled diffusional creep: A consideration of grain boundary dislocation climb sources10.1016/0025-5416(72)90060-2 ↗
60. Field theory and diffusion creep predictions in polycrystalline aggregates10.1088/0965-0393/23/5/055006 ↗
61. A coupled model of diffusional creep of polycrystalline solids based on climb of dislocations at grain boundaries10.1016/j.jmps.2019.103786 ↗
62. Irreversible thermodynamics of creep in crystalline solids10.1103/PhysRevB.88.184303 ↗
63. Thermally activated deformation of crystalline materials10.1002/pssb.19690340102 ↗
64. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
65. The measurement of the activation volume of interstitials in electron irradiated platinum10.1080/00337577908226445 ↗
66. Self-diffusion entropies and activation volumes in fcc metals10.1016/0378-4363(82)90063-8 ↗
67. Activation volume of silicon diffusion in San Carlos olivine10.1029/97GL02735 ↗
68. Activation volumes for diffusion of copper, iron and silicon in nickel10.1007/BF00420218 ↗
69. Atomic transport of trivalent impurities in silicon: diffusion, isotope effects, activation volumes10.1039/FT9908601293 ↗
70. Activation volume for inelastic deformation in polycrystalline Ag thin films10.1016/S1359-6454(99)00403-6 ↗
71. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
72. Enhanced solid solution effects on the strength of nanocrystalline alloys10.1016/j.actamat.2010.11.026 ↗
73. Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation10.1016/j.actamat.2011.05.038 ↗
74. Calculation of Activation Volumes for Self‐Diffusion and Creep at High Temperature10.1063/1.1658396 ↗
75. Temperature and Strain-Rate Dependence of Surface Dislocation Nucleation10.1103/PhysRevLett.100.025502 ↗
76. Deformation response of grain boundary networks at high temperature10.1007/s10853-017-1760-8 ↗
77. Interplay of Sintering Microstructures, Driving Forces, and Mass Transport Mechanisms10.1111/j.1151-2916.1989.tb07705.x ↗
78. Some Theorems on the Free Energies of Crystal Surfaces10.1103/PhysRev.82.87 ↗
79. Surface and grain-boundary energies in yttria-stabilized zirconia (YSZ-8 mol%)10.1007/BF01159310 ↗
80. Calorimetric Measurement of Surface and Interface Enthalpies of Yttria-Stabilized Zirconia (YSZ)10.1021/cm100255u ↗
81. Thermodynamics of diffusion under pressure and stress: relation to point defect mechanisms10.1063/1.119066 ↗
82. Cation grain-boundary diffusivity in SiO2- and MgO-doped Al2O310.1111/jace.15104 ↗
83. Cr3+ chemical diffusivity in aliovalent doped aluminas10.1016/j.jeurceramsoc.2017.04.053 ↗
84. In situ TEM sintering of nano-sized ZrO2 particles10.1016/0921-5093(95)09936-0 ↗
85. Unstable neck formation during initial-stage sintering10.1111/j.1151-2916.1994.tb07088.x ↗
86. In situ electron microscopy studies of the sintering of palladium nanoparticles on alumina during catalyst regeneration processes10.1017/S1431927604040188 ↗
87. In situ transmission electron microscopy of catalyst sintering10.1016/j.jcat.2013.08.018 ↗
88. Relating Rates of Catalyst Sintering to the Disappearance of Individual Nanoparticles during Ostwald Ripening10.1021/ja208324n ↗
89. Unstable Neck Formation during Initial-Stage Sintering10.1111/j.1151-2916.1994.tb07088.x ↗
90. In-situ observations of classical grain growth mechanisms during sintering of copper nanoparticles on (001) copper10.1063/1.120000 ↗
91. On grain boundary dislocations and ledges10.1016/0001-6160(73)90150-8 ↗
92. Diffusion Sintering: I, Initial Stage Sintering Models and Their Application to Shrinkage of Powder Compacts10.1111/j.1151-2916.1963.tb14606.x ↗
93. Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts10.1063/1.1736108 ↗
94. An atomistic simulation study of nanoscale sintering: The role of grain boundary misorientation10.1016/j.commatsci.2019.04.015 ↗
95. Densification of powder compacts: An unfinished story10.1016/j.jeurceramsoc.2007.12.016 ↗
96. Self-diffusion in sintering of metallic particles
97. Sintering processes in direct ink write additive manufacturing: A mesoscopic modeling approach10.1016/j.actamat.2019.01.011 ↗
98. Analysis of particle rolling and intrinsic rotations in copper powder during sintering10.1007/s10853-012-6558-0 ↗
99. Direct observation of sintering mechanics of a single grain boundary10.1016/j.actamat.2011.10.003 ↗
100. Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)10.1038/s41598-017-04742-1 ↗