Behavior of LiFe1−yMnyPO4/C cathode materials upon electrochemical lithium intercalation/deintercalation
Source abstract
Abstract
Abstract LiFe1−yMnyPO4/C (y = 0–0.3) nanocomposites are prepared by the sol–gel method, and their properties are characterized with the use of the XRD analysis, SEM, impedance spectroscopy, charge/discharge tests, and Mossbauer spectroscopy. The samples with a low manganese content, LiFe1−yMnyPO4 (y = 0.1, 0.2) are characterized by an increased conductivity. In LiFe1−yMnyPO4 (x = 0.1–0.3), electrochemical lithium deintercalation/intercalation proceeds in two stages which due to the subsequent oxidation/reduction of iron and manganese ions. The LiFe1−yMnyPO4/С (y = 0.1, 0.2) samples show enhanced charge/discharge capacity, especially, at high current density (for LiFe0.9Mn0.1PO4/C, the discharge capacity is equal to 142 and 55 mAh g−1 at a current density of 20 and 1600 mA g−1, respectively). Mn2+ ↔ Mn3+ transition in LiFe1−yMnyPO4 proceeds via the solid solutions formation under gradual changes in the potential. For LiFe0.7Mn0.3PO4, oxidation and reduction of iron ions follow the same scenario. According to the Mossbauer spectroscopy data, manganese is orderly distributed in LixFeIII1−yMnyPO4: iron contains not more than one manganese cation in its nearest neighborhood. Moreover, combination of the Mossbauer spectroscopy and X-ray analysis data indicates that, in the interval where solid solutions exist in LixFe0.7Mn0.3PO4, the regions with an inhomogeneous distribution of divalent and trivalent manganese ions are formed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
2. Optimized LiFePO4 for lithium battery cathodes10.1149/1.1348257 ↗
3. Approaching theoretical capacity of LiFePO4 at room temperature at high rates10.1149/1.1396695 ↗
4. Fine-particle lithium iron phosphate LiFePO4 synthesized by a new low-cost aqueous precipitation technique10.1016/S0378-7753(03)00241-6 ↗
5. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
6. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
7. Review and analysis of nanostructured olivine-based lithium recheargeable batteries: Status and trends10.1016/j.jpowsour.2012.12.095 ↗
8. Lithium intercalation and deintercalation processes in Li4Ti5O12 and LiFePO410.1134/S0020168512010141 ↗
9. Delacourt, M. Armand, M. Gauhtier, J.-F. Magnan, N. Ravet, Method for Synthesis of Carbon-coated Redox Materials with Controlled Size, World Patent WO 02/27823 A1.
10. Electronically conductive phospho-olivines as lithium storage electrodes10.1038/nmat732 ↗
11. Development of lithium batteries for energy storage and EV applications10.1016/S0378-7753(01)00885-0 ↗
12. Ionic and electronic transport in single crystalline LiFePO4 grown by optical floating zone technique10.1016/j.ssi.2008.01.079 ↗
13. LiFePO4 storage at room and elevated temperatures10.1016/S0378-7753(03)00215-5 ↗
14. Improved electrochemical performance of LiFePO4 by increasing its specific surface area10.1016/j.electacta.2006.05.002 ↗
15. Surfactant based sol–gel approach to nanostructured LiFePO4 for high rate Li-ion batteries10.1016/j.jpowsour.2006.09.082 ↗
16. Developments in nanostructured cathode materials for high-performance lithium-ion batteries10.1002/adma.200702242 ↗
17. Surface and interface engineering of electrode materials for lithium-ion batteries10.1002/adma.201402962 ↗
18. Electrochemical properties of carbon coated LiFePO4 cathode materials10.1016/j.jpowsour.2005.03.201 ↗
19. Enhancing the performances of Li-ion batteries by carbon-coating: present and future10.1039/C1CC14764A ↗
20. Nano-network electronic conduction in iron and nickel olivine phosphates10.1038/nmat1063 ↗
21. Electrochemical properties of LiFe0.9Mn0.1PO4/Fe2P cathode material by mechanical alloying10.1016/j.jpowsour.2008.12.090 ↗
22. Vanadium-doping of LiFePO4/carbon composite cathode materials synthesized with organophosphorus source10.1016/j.electacta.2015.03.185 ↗
23. Improving the rate performance of LiFePO4 by Fe-site doping10.1016/j.electacta.2004.11.045 ↗
24. High rate capability of Co-doped LiFePO4/C10.1016/j.electacta.2013.02.132 ↗
25. High-throughput studies of Li1−xMgx/2FePO4 and LiFe1−yMgyPO4 and the effect of carbon coating10.1016/j.jpowsour.2008.01.034 ↗
26. Lithium intercalation and deintercalation into lithium–iron phosphates doped with cobalt10.1016/j.mencom.2013.09.003 ↗
27. LiFe1−xMIIxPO4/C (MII = Co, Ni, Mg) as cathode materials for lithium-ion batteries10.1016/j.electacta.2013.08.118 ↗
28. Chemistry and electrochemistry of lithium iron phosphate10.1007/s10008-007-0443-9 ↗
29. Crystal Chemistry of the olivine-type Li(MnyFe1−y)PO4 and (MnyFe1−y)PO4 as possible 4 V cathode materials for lithium batteries10.1149/1.1385377 ↗
30. Phase diagram of Lix(MnyFe1−y)PO4 (0 ≤ x, y ≤ 1)10.1149/1.1401083 ↗
31. Electrochemical, magnetic, and structural investigation of the Lix(MnyFe1−y)PO4 olivine phases10.1021/cm051861f ↗
32. Solvothermal synthesis of LiMn1−xFexPO4 Cathodes materials: a study of reaction mechanisms by time-resolved in-situ synchrotron X-ray diffraction10.1021/jp508600u ↗
33. One-step low-temperature route for the preparation of electrochemically active LiMnPO4 powders10.1021/cm030347b ↗
34. Toward understanding of electrical limitations (electronic, ionic) in LiMPO4 (M = Fe, Mn) electrode materials10.1149/1.1884787 ↗
35. Preparation of carbon coated LiMnPO4 powders by a combination of spray pyrolysis with dry ball-milling followed by heat treatment10.1016/j.apt.2009.10.016 ↗
36. LiFexMn1−xPO4: a cathode for lithium-ion batteries10.1016/j.jpowsour.2010.12.045 ↗
37. Co-precipitation synthesis of micro-sized spherical LiMn0.5Fe0.5PO4 cathode material for lithium batteries10.1039/c1jm13889h ↗
38. LiMn(0.8)Fe(0.2)PO(4): an advanced cathode material for rechargeable lithium batteries10.1002/anie.200903587 ↗
39. Diffusional mechanism of deintercalation in LiFe1−yMnyPO4 cathode material10.1016/j.ssi.2006.03.047 ↗
40. A novel nano structured LiFePO4/C composite as cathode for Li-ion batteries10.1016/j.jpowsour.2013.10.109 ↗
41. Hierarchical structured LiMn0.5Fe0.5PO4 spheres synthesized by template-engaged reaction as cathodes for high power Li-ion batteries10.1016/j.electacta.2015.08.024 ↗
42. A surfactant-assisted synthesis route for scalable preparation of high performance of LiFe0.15Mn0.85PO4/C cathode using bimetallic precursor10.1016/j.jpowsour.2014.04.049 ↗
43. The enhanced rate performance of LiFe0.5Mn0.5PO4/C cathode material via synergistic strategies of surfactant-assisted solid state method and carbon coating10.1039/C4TA05431H ↗
44. An additional discharge plateau of Mn3+ in LiFe0.5Mn0.5PO4 at high current rates10.1016/j.elecom.2015.03.004 ↗
45. LiMn0.8Fe0.2PO4/C cathode material synthesized via co-precipitation method with superior high-rate and low-temperature performances for lithium-ion batteries10.1016/j.jpowsour.2014.11.063 ↗
46. Zh. Ma, Y. Fan, G. Shao, G. Wang, J. Song, T. Liu, In-situ catalytic synthesis of high-graphitized carbon coated LiFePO4 nanoplates for superior Li-ion battery cathodes, ACS Appl. Mater. Interfaces, Just Accepted Manuscript. http://dx.doi.org/10.1021/am5084368.10.1021/am5084368 ↗
47. B. Wang, W. Al Abdulla, D. Wang, X. S. Zhao, Three-dimensional porous LiFePO4 cathode material modified with nitrogen-doped graphene aerogel for high-power lithium ion batteries, Energy Environ. Sci. http://dx.doi.org/10.1039/b000000x.
48. Y. Zhao, L. Peng, B. Liu, G. Yu, Single-crystalline LiFePO4 nanosheets for high-rate Li-ion batteries, Nano Lett. http://dx.doi.org/10.1021/nl5008568.10.1021/nl5008568 ↗
49. SpectrRelax: an application for Mössbauer spectra modeling and fitting10.1063/1.4759488 ↗
50. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
51. Effect of annealing on transport properties of LiFePO4: Towards a defect chemical model10.1016/j.ssi.2007.11.017 ↗
52. Hydrothermal synthesis and properties of manganese-doped LiFePO410.1007/s11581-012-0700-5 ↗
53. A joint experimental and theoretical study on the effect of manganese doping on the structural, electrochemical and physical properties of lithium iron phosphate10.1039/C4RA11366G ↗
54. Enhanced electrochemical performance of LiFePO4/C via Mo-doping at Fe site10.1016/j.electacta.2011.08.086 ↗
55. Effects of titanium incorporation on phase and electrochemical performance in LiFePO4 cathode material10.1016/j.electacta.2012.06.067 ↗
56. Enhanced electrochemical performances of LiFePO4/C by co-doping with magnesium and fluorine10.1016/j.electacta.2013.09.044 ↗
57. High rate capability of Co-doped LiFePO4/C10.1016/j.electacta.2013.02.132 ↗