Slime-inspired polyacrylic acid-borax crosslinked binder for high-capacity bulk silicon anodes in lithium-ion batteries
Source abstract
Abstract
Abstract Binder plays a key role in maintaining the integrity of battery electrodes. In this work, we investigate the relationship between binder properties and performances of Si electrodes in a lithium-ion battery (LIB). We learn from nature and use borax as a crosslinker between strands of polyacrylic acid (PAA) to form a network in the binder. By adding different amounts of borax, we can control the degree of crosslinking and thus the mechanical and chemical properties of the binder. We find that increasing the amount of borax crosslinker increases the modulus of the polymer network and the stability of the corresponding Si electrode up to about 5 wt% borax. Even with Si microparticles with an electrode density of 1.25 g cm−3, we obtain a capacity of about 2470 mA h g−1 (3.1 mA h cm−2) and a capacity retention of 91.2% after 50 cycles. Cycle performance is extended beyond 500 cycles with a capacity limitation of 1000 mA h g−1. Though, excessive amount of borax consumes the functional groups of PAA and compromises electrode adhesion, resulting in a decrease in cycle stability. Striking a balance between mechanical strength and adhesion of the binder is important for further development of alloy-based anode materials for LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
4. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
5. Silicon based lithium-ion battery anodes: a chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
6. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
7. Promises and challenges of nanomaterials for lithium-based rechargeable batteries10.1038/nenergy.2016.71 ↗
8. Challenges and recent progress in the development of Si anodes for lithium-ion battery10.1002/aenm.201700715 ↗
9. Silicon-based anodes for lithium-ion batteries: from fundamentals to practical applications10.1002/smll.201702737 ↗
10. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
11. Electrochemical properties of non-nano-silicon negative electrodes prepared with a polyimide binder10.1016/j.jpowsour.2014.09.096 ↗
12. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
13. Study on polymer binders for high-capacity SiO negative electrode of Li-ion batteries10.1021/jp201691g ↗
14. A major constituent of brown algae for use in high-capacity Li-ion batteries10.1126/science.1209150 ↗
15. Multiple hydrogel alginate binders for Si anodes of lithium-ion battery10.1016/j.electacta.2017.05.094 ↗
16. Interactions of silicon nanoparticles with carboxymethyl cellulose and carboxylic acids in negative electrodes of lithium-ion batteries10.1016/j.jpowsour.2019.05.036 ↗
17. Crack-resistant polyimide coating for high-capacity battery anodes10.1016/j.jpowsour.2017.09.037 ↗
18. Suppressing vertical displacement of lithiated silicon particles in high volumetric capacity battery electrodes10.1002/celc.201500133 ↗
19. Effect of polyimide binder on electrochemical characteristics of surface-modified silicon anode for lithium ion batteries10.1016/j.jpowsour.2013.02.049 ↗
20. The electrochemical behavior of polyimide binders in Li and Na cells10.1149/2.0061603jes ↗
21. A highly cross-linked polymeric binder for high-performance silicon negative electrodes in lithium ion batteries10.1002/anie.201201568 ↗
22. Interpenetrated gel polymer binder for high-performance silicon anodes in lithium-ion batteries10.1002/adfm.201401269 ↗
23. In situ crosslinked PVA–PEI polymer binder for long-cycle silicon anodes in Li-ion batteries10.1039/C6RA12232A ↗
24. Strengthening alginate/polyacrylamide hydrogels using various multivalent cations10.1021/am403966x ↗
25. Cross-linked chitosan as an efficient binder for Si anode of Li-ion batteries10.1021/acsami.5b10673 ↗
26. Rational design of a multifunctional binder for high-capacity silicon-based anodes10.1021/acsenergylett.9b00815 ↗
27. Integrating Si nanoscale building blocks into micro-sized materials to enable practical applications in lithium-ion batteries10.1039/C5NR07625K ↗
28. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
29. High performance silicon nanoparticle anode in fluoroethylene carbonate-based electrolyte for Li-ion batteries10.1039/c2cc31712e ↗
30. A novel approach to synthesize micrometer-sized porous silicon as a high performance anode for lithium-ion batteries10.1016/j.nanoen.2018.05.048 ↗
31. Crosslinked chitosan networks as binders for silicon/graphite composite electrodes in li-ion batteries10.1149/2.114805jes ↗
32. Demonstrating unique behaviors of polymers10.1021/acs.jchemed.7b00008 ↗
33. Crosslinked carboxymethyl cellulose-sodium borate hybrid binder for advanced silicon anodes in lithium-ion batteries10.1016/j.cclet.2018.03.008 ↗
34. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. Identification of functional groups and determination of carboxyl formation temperature in graphene oxide using the XPS O 1s spectrum10.1016/j.tsf.2015.07.051 ↗
36. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
37. Silicon microparticle anodes with self-healing multiple network binder10.1016/j.joule.2018.02.012 ↗
38. Partially neutralized polyacrylic acid/poly (vinyl alcohol) blends as effective binders for high-performance silicon anodes in lithium-ion batteries10.1021/acsaem.8b01277 ↗
39. Poly (vinyl alcohol)/poly (acrylic acid) hydrogels: FT‐IR spectroscopic characterization of crosslinking reaction and work at transition point10.1002/(SICI)1521-4044(19991201)50:11/12<383::AID-APOL383>3.0.CO;2-Z ↗
40. An efficient two-polymer binder for high-performance silicon nanoparticle-based lithium-ion batteries: a systematic case study with commercial polyacrylic acid and polyvinyl butyral polymers10.1149/2.0371903jes ↗
41. Towards improving the practical energy density of li-ion batteries: optimization and evaluation of silicon: graphite composites in full cells10.1149/2.0481701jes ↗
42. Nano-and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗