Manipulating cation nonstoichiometry towards developing better electrolyte for self-humidified dual-ion solid oxide fuel cells
Source abstract
Abstract
Dual-ion (oxygen ion and proton) conducting electrolyte BaZrCeYYbO (BZCYYb) is one of the most commonly used electrolyte materials for proton conducting fuel cells (PCFCs). Here, we improve conducting property and performance of BZCYYb electrolyte through simply introducing B-site cation deficiency. Dual-ion conductivities for Ba(ZrCeYYb)O (BZCYYb-0.95) electrolyte are improved to a large extent as 2.5 times protonic conductivity (4.6 × 10 S cm at 700 °C) and 6.3 times oxygen ionic conductivity (1.2 × 10 S cm at 900 °C) compared to BZCYYb electrolyte. Low-temperature (1350 °C) sinterability of BZCYYb-0.95 is achieved for the higher concentration of defect compared to the original material (BZCYYb, 1500 °C). Meanwhile, a cell with the BZCYYb-0.95 electrolyte illustrates prominent power density of 794 mW cm at 650 °C, superior to the cell with BZCYYb (643 mW cm) at the same condition. The collaborative diffusions of dual-ion via two different conducting mechanisms enhance the cell performance with BZCYYb-0.95 electrolyte. The cell voltage and power density actually have no observable performance degradation during the course of the 300-h test. Therefore, it indicates the dual-ion diffusions of BZCYYb-0.95 electrolyte as the promising future for practical application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. A thermally self-sustained micro solid-oxide fuel-cell stack with high power density10.1038/nature03673 ↗
2. Fabrication of high-performance proton-conducting electrolytes from microwave prepared ultrafine powders for solid oxide fuel cells10.1016/j.jpowsour.2018.11.051 ↗
3. Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production10.1038/s41560-019-0333-2 ↗
4. Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an electrolyte for low-temperature solid oxide fuel cells10.1038/s41467-019-09532-z ↗
5. Direct application of cobaltite-based perovskite cathodes on the yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cells10.1039/C6TA07067A ↗
6. A single-/double-perovskite composite with an overwhelming single-perovskite phase for the oxygen reduction reaction at intermediate temperatures10.1039/C7TA07760B ↗
7. Boosting the activity of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ perovskite for oxygen reduction reactions at low-to-intermediate temperatures through tuning B-site cation deficiency10.1002/aenm.201902384 ↗
8. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
9. Ceramic technology: oxide-ion conductors by design10.1038/35009177 ↗
10. A robust and active hybrid catalyst for facile oxygen reduction in solid oxide fuel cells10.1039/C6EE03656B ↗
11. Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides10.1039/C4CS00194J ↗
12. A review of advanced proton-conducting materials for hydrogen separation10.1016/j.pmatsci.2015.04.002 ↗
13. High temperature fuel and steam electrolysis cells using proton conductive solid electrolytes10.1016/0378-7753(82)80018-9 ↗
14. Proton conduction in sintered oxides based on BaCeO310.1149/1.2095649 ↗
15. Pr and Y co-doped barium zirconate electrolytes with high proton conductivity for intermediate-temperature solid oxide fuel cells10.1002/adfm.201001540 ↗
16. Towards the next generation of solid oxide fuel cells operating below 600°C with chemically stable proton-conducting electrolytes10.1002/adma.201103102 ↗
17. Electrochemical properties and intermediate-temperature fuel cell performance of dense yttrium-doped barium zirconate with calcium addition10.1111/j.1551-2916.2011.04795.x ↗
18. Effect of anode gas mixture humidification on the electrochemical performance of the BaCeO3-based protonic ceramic fuel cell10.1016/j.ijhydene.2015.11.092 ↗
19. Determination of partial conductivities and computational analysis of the theoretical power density of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (BZCYYb1711) electrolyte under various PCFC conditions10.1039/C9TA07135K ↗
20. A new energy conversion technology based on nano-redox and nano-device processes10.1016/j.nanoen.2013.05.001 ↗
21. Improved ceria-carbonate composite electrolytes10.1016/j.ijhydene.2009.04.038 ↗
22. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-δ10.1126/science.1174811 ↗
23. Fabrication and characterization of a tubular ceramic fuel cell based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ proton conducting electrolyte10.1016/j.jpowsour.2016.12.010 ↗
24. Dual-phase cathode with a highly active catalyst coating for protonic ceramic fuel cells10.1002/adfm.201704907 ↗
25. Self-assembled triple-conducting nanocomposite as a superior protonic ceramicfuel cell cathode10.1016/j.joule.2019.07.004 ↗
26. New reduced-temperature ceramic fuel cells with dual-ion conducting electrolyte and triple-conducting double perovskite cathode10.1039/C9TA03501J ↗
27. Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features10.1039/b915141a ↗
28. Microstructures and grain boundary conductivity of BaZr1−xYxO3 (x= 0.05, 0.10, 0.15) ceramics10.1016/j.ssi.2007.02.019 ↗
29. Enhanced sintering of yttrium-doped barium zirconate by addition of ZnO10.1111/j.1551-2916.2005.00449.x ↗
30. Electrochemical behavior and performances of Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ cermet anodes for protonic ceramic fuel cell10.1016/j.ijhydene.2017.12.024 ↗
31. Exploring the role of NiO as a sintering aid in BaZr0.1Ce0.7Y0.2O3-δ electrolyte for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2018.07.087 ↗
32. Oxidation states of the transition metal cations in the highly nonstoichiometric perovskite-type oxide Ba0.1Sr0.9Co0.8Fe0.2O3-δ10.1039/b819415g ↗
33. B-site cation diffusivity of Mn and Cr in perovskite-type LaMnO3 with cation-deficit nonstoichiometry10.1039/b901208g ↗
34. Properties and performance of A-site deficient (Ba0.5Sr0.5)1-xCo0.8Fe0.2O3-δ for oxygen permeating membrane10.1016/j.memsci.2007.09.004 ↗
35. A-site excessive (La0.8Sr0.2)1+xMnO3 perovskite oxides for bifunctional oxygen catalyst in alkaline media10.1021/acscatal.9b00800 ↗
36. Materials design for ceramic oxygen permeation membranes: single perovskite vs. single/double perovskite composite, a case study of tungsten-doped barium strontium cobalt ferrite10.1016/j.memsci.2018.09.004 ↗
37. Effect of Co doping on sinterability and protonic conductivity of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ for protonic ceramic fuel cells10.1016/j.jpowsour.2017.02.049 ↗
38. Non-stoichiometry, grain boundary transport and chemical stability of proton conducting perovskites10.1023/A:1004877708871 ↗
39. Effect of Ba nonstoichiometry on the phase structure, sintering, electrical conductivity and phase stability of Ba1±xCe0.4Zr0.4Y0.2O3-δ (0≤x≤0.20) proton conductors10.1016/j.ijhydene.2011.04.037 ↗
40. The influence of cation non-stoichiometry on the properties of undoped and gadolinia-doped barium cerate10.1016/S0167-2738(97)00029-5 ↗
41. Barium non-stoichiometry role on the properties of Ba1+xCe0.65Zr0.20Y0.15O3-δ proton conductors for IT-SOFCs10.1002/fuce.200800021 ↗
42. Probing CO2 reaction mechanisms and effects on the SrNb0.1Co0.9-xFexO3-δ cathodes for solid oxide fuel cells10.1016/j.apcatb.2015.02.010 ↗
43. Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides10.1016/S0167-2738(99)00188-5 ↗
44. The effects of dopants and A: B site nonstoichiometry on properties of perovskite‐type proton conductors
45. Perovskite-based mixed protonic-electronic conducting membranes for hydrogen separation: recent status and advances10.1016/j.jiec.2017.11.016 ↗
46. Proton conductivity: materials and applications10.1021/cm950192a ↗
47. Enhanced proton conductivity in sulfonated poly (ether ether ketone) membranes by incorporating sodium dodecyl benzene sulfonate10.3390/polym11020203 ↗
48. New, efficient, and reliable air electrode material for proton-conducting reversible solid oxide cells10.1021/acsami.7b16703 ↗
49. Effect of zirconium doping on hydrogen permeation through strontium cerate membranes10.1021/ie9015182 ↗
50. Materials challenges toward proton-conducting oxide fuel cells: a critical review10.1039/b902343g ↗
51. Synthesis, chemical stability and proton conductivity of the perovksites Ba(Ce, Zr)1-xScxO3-δ10.1016/j.ssi.2007.02.004 ↗
52. Equations for transport in solid oxides and sulfides of transition metals10.1016/0079-6786(75)90002-3 ↗
53. Electrical conductivity of nanocrystalline ceria and zirconia thin films10.1016/S0167-2738(00)00591-9 ↗
54. Effect of temperature and dopant concentration on the conductivity of samaria-doped ceria electrolyte10.1007/s100080100238 ↗
55. Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance10.1016/j.elecom.2010.05.005 ↗
56. Enhanced durability of a proton conducting oxide fuel cell with a purified yttrium-doped barium zirconate-cerate electrolyte10.1016/j.jpowsour.2014.12.046 ↗
57. Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3-δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3-δ perovskite cathode10.1016/j.jpowsour.2008.05.075 ↗
58. Lattice incorporation of Cu2+ into the BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolyte on boosting its sintering and proton-conducting abilities for reversible solid oxide cells10.1021/acsami.8b15402 ↗
59. Improved transport property of proton-conducting solid oxide fuel cell with multi-layered electrolyte structure10.1016/j.jpowsour.2017.08.038 ↗