Heat and fuel coupled operation of a high temperature polymer electrolyte fuel cell with a heat exchanger methanol steam reformer
Source abstract
Abstract
In this work a methanol steam reforming (MSR) reactor has been operated thermally coupled to a high temperature polymer electrolyte fuel cell stack (HT-PEMFC) utilizing its waste heat. The operating temperature of the coupled system was 180 °C which is significantly lower than the conventional operating temperature of the MSR process which is around 250 °C. A newly designed heat exchanger reformer has been developed by VTT (Technical Research Center of Finland LTD) and was equipped with commercially available CuO/ZnO/Al2O3 (BASF RP-60) catalyst. The liquid cooled, 165 cm2, 12-cell stack used for the measurements was supplied by Serenergy A/S. The off-heat from the electrochemical fuel cell reaction was transferred to the reforming reactor using triethylene glycol (TEG) as heat transfer fluid. The system was operated up to 0.4 A cm-2 generating an electrical power output of 427 Wel. A total stack waste heat utilization of 86.4% was achieved. It has been shown that it is possible to transfer sufficient heat from the fuel cell stack to the liquid circuit in order to provide the needed amount for vaporizing and reforming of the methanol-water-mixture. Furthermore a set of recommendations is given for future system design considerations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – a review10.1016/j.jpowsour.2012.11.126 ↗
2. A comprehensive review of PBI-based high temperature PEM fuel cells
3. Experimental investigation of a liquid cooled high temperature proton exchange membrane (HT-PEM) fuel cell coupled to a sodium alanate tank10.1016/j.ijhydene.2014.01.127 ↗
4. The CO poisoning effect in PEMFCs operational at temperatures up to 200 °C10.1149/1.1619984 ↗
5. Integration of high temperature PEM fuel cells with a methanol reformer10.1016/j.jpowsour.2005.02.056 ↗
6. Methanol steam reforming for hydrogen generation via conventional and membrane reactors: a review10.1016/j.rser.2013.08.032 ↗
7. Catalysts for methanol steam reforming-a review10.1016/j.apcatb.2010.06.015 ↗
8. Performance of internal reforming methanol fuel cell under various methanol/water concentrations10.1007/s10800-012-0453-x ↗
9. In situ hydrogen utilization in an internal reforming methanol fuel cell10.1016/j.ijhydene.2014.03.101 ↗
10. Hydrogen production of two-stage temperature steam reformer integrated with PBI membrane fuel cells to optimize thermal management10.1016/j.ijhydene.2013.01.090 ↗
11. Heat integration of methanol steam reformer with a high-temperature polymeric electrolyte membrane fuel cell
12. Innovative ZrO2-supported CuPd catalysts for the selective production of hydrogen from methanol steam reforming10.1016/j.apcatb.2016.10.041 ↗
13. A new palladium-based catalyst for methanol steam reforming in a miniature fuel cell power source10.1595/147106708X324403 ↗
14. Hydrogen generation by steam reforming of methanol over copper-based catalysts for fuel cell applications10.1016/S0360-3199(01)00034-9 ↗
15. Performance evaluation of a proof-of-concept 70 W internal reforming methanol fuel cell system10.1016/j.jpowsour.2016.01.029 ↗
16. McBride · 2002 · 291
17. Pressure drop of packed bed vertical flow for multiphase hydrogen production10.1016/j.ijhydene.2010.10.102 ↗
18. Pulsationsarmer laborverdampfer für kleine Flüssigkeitsströme10.1002/cite.200500174 ↗
19. Development of HT-PEFC stacks in the kW range10.1016/j.ijhydene.2013.01.127 ↗
20. Design and control of high temperature PEM fuel cell systems using methanol reformers with air or liquid heat integration introduction
21. Behavior of PEMFC in starvation10.1016/j.jpowsour.2005.08.006 ↗
22. Behaviors of proton exchange membrane fuel cells under oxidant starvation10.1016/j.jpowsour.2010.11.005 ↗
23. Inorganic microporous membranes for H2 and CO2 separation-review of experimental and modeling progress10.1016/j.ces.2015.01.022 ↗
24. Carbon molecular sieve membranes supported on non-modified ceramic tubes for hydrogen separation in membrane reactors10.1016/j.ijhydene.2012.06.069 ↗
25. CO2 separation by supported ionic liquid membranes and prediction of separation performance10.1016/j.ijggc.2016.07.041 ↗
26. Recent development of ionic liquid membranes10.1016/j.gee.2016.05.002 ↗
27. The CO2 permeability and mixed gas CO2/H2 selectivity of membranes composed of CO2-philic polymers10.1016/j.memsci.2011.01.028 ↗
28. Performance of high temperature PEM fuel cell materials. Part 1: effects of temperature, pressure and anode dilution10.1016/j.ijhydene.2015.12.069 ↗
29. Methanol steam reforming reaction in a Pd-Ag membrane reactor for CO-free hydrogen production10.1016/j.ijhydene.2008.07.044 ↗
30. H2 production by low pressure methanol steam reforming in a dense Pd-Ag membrane reactor in co-current flow configuration: experimental and modeling analysis10.1016/j.ijhydene.2013.06.001 ↗
31. Methanol steam reforming in an Al2O3 supported thin Pd-layer membrane reactor over Cu/ZnO/Al2O3 catalyst10.1016/j.ijhydene.2013.11.113 ↗