Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550
Source abstract
Abstract
Abstract A series of novel organic-inorganic crosslinked hybrid proton exchange membranes were prepared using sulfonated poly(arylene ether ketone sulfone) polymers containing carboxyl groups (C-SPAEKS), (3-aminopropyl)-triethoxysilane (KH550), and tetraethoxysilane (TEOS). KH550 acted as a “bridge” after reacting with carboxyl and sulfonic groups of C-SPAEKS to form covalent and ionic crosslinked structure between the C-SPAEKS and SiO2 phase. The crosslinked hybrid membranes (C-SPAEKS/K-SiO2) were characterized by FT-IR spectroscopy, TGA, and electrochemistry, etc. The thermal stability, mechanical properties and proton conductivity of the crosslinked hybrid membranes were improved by the presence of both crosslinked structure and inorganic phase. The proton conductivity of C-SPAEKS/K-SiO2-8 was recorded as 0.110 S cm−1, higher than that of Nafion® (0.028 S cm−1) at 120 °C. Moreover, the methanol permeability of the C-SPAEKS/K-SiO2-8 was measured as 3.86 × 10−7 cm2 s−1, much lower than that of Nafion® 117 membranes (29.4 × 10−7 cm2 s−1) at 25 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Dual cross-linked organic-inorganic hybrid polymer electrolyte membranes based on quaternized poly(ether ether ketone) and (3-aminopropyl) triethoxysilane10.1016/j.jpowsour.2014.11.078 ↗
2. SPEEK proton exchange membranes modified with silica sulfuric acid nanoparticles10.1016/j.ijhydene.2012.05.024 ↗
3. ZrO2-Nafion composite membranes for polymer electrolyte fuel cells (PEMFCs) at intermediate temperature10.1016/j.jpowsour.2005.12.062 ↗
4. Preparation and characterization of sulfated zirconia (SO4 2-/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity10.1016/j.memsci.2006.01.028 ↗
5. Synthesis and characterization of Nafion®-MO2 (M= Zr, Si, Ti) nanocomposite membranes for higher temperature PEM fuel cells10.1016/j.electacta.2005.05.016 ↗
6. Sulfated zirconia-Nafion composite membranes for higher temperature direct methanol fuel cells10.1016/j.jpowsour.2006.01.001 ↗
7. Homogeneous synthesis of PFSI/silica composite membranes for PEMFC operating at low humidity10.1016/j.electacta.2006.11.013 ↗
8. Stabilized composite membranes and membrane electrode assemblies for elevated temperature/low relative humidity PEFC operation10.1016/j.jpowsour.2005.03.135 ↗
9. Improvement of low-humidity performance of PEMFC by addition of hydrophilic SiO2 particles to catalyst layer10.1016/j.jpowsour.2005.11.050 ↗
10. Hydrophilic-hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low temperature coupling reactions for proton exchange membrane fuel cells10.1016/j.polymer.2007.12.023 ↗
11. Poly(arylene ether sulfone)s containing pendant sulfonic acid groups as membrane materials for direct methanol fuel cells10.1016/j.memsci.2008.12.043 ↗
12. Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic-hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells10.1016/j.memsci.2008.12.066 ↗
13. Hydrophilic-hydrophobic multiblock copolymers based on poly(arylene ether sulfone)s as novel proton exchange membranes-part B10.1016/j.polymer.2008.08.046 ↗
14. Synthesis of novel crosslinked sulfonated poly(ether sulfone)s using bisazide and their properties for fuel cell application10.1016/j.memsci.2008.06.024 ↗
15. Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers10.1002/pola.10755 ↗
16. Sulfonated poly(arylene ether sulfone) membranes based on biphenol for direct methanol fuel cells10.1007/s11814-008-0120-4 ↗
17. Synthesis and characterization of poly(ether sulfone) grafted poly(styrene sulfonic acid) for proton conducting membranes10.1007/s11814-009-0088-8 ↗
18. Sulfonated polySEPS/hydrophilic-SiO2 composite membranes for polymer electrolyte membranes (PEMs)10.1016/j.jiec.2014.08.030 ↗
19. Nafion-TiO2 hybrid membranes for medium temperature polymer electrolyte fuel cells (PEFCs)10.1016/j.jpowsour.2004.12.053 ↗
20. Anhydrous proton exchange membrane of sulfonated poly(ether ether ketone) enabled by polydopamine-modified silica nanoparticles10.1016/j.electacta.2014.11.165 ↗
21. Synthesis and property of a novel sulfonated poly(arylene ether ketone sulfone) membrane with a high β-value for direct methanol fuel cell applications10.1016/j.electacta.2014.09.071 ↗
22. Synthesis and property of a novel sulfonated poly(ether ether ketone) with high selectivity for direct methanol fuel cell applications10.1016/j.memsci.2009.07.021 ↗
23. Synthesis of a novel sulfonated poly(ether ether sulfone)s used as proton exchange membrane fuel cell (PEMFC)
24. Direct synthesis of sulfonated poly (ether ether ketone ketone)s (SPEEKKs) proton exchange membranes for fuel cell application10.1016/j.polymer.2005.04.067 ↗
25. Solution processable octa(aminophenyl) silsesquioxane covalently crosslinked sulfonated polyimides for proton exchange membranes10.1016/j.memsci.2014.12.002 ↗
26. Enhanced proton conductivity of nanofibrous composite membranes enabled by acid-base pairs under hydrated and anhydrous conditions10.1016/j.memsci.2015.02.015 ↗
27. Enhanced proton conductivity of the proton exchange membranes by the phosphorylated silica submicrospheres10.1016/j.jpowsour.2012.09.080 ↗
28. New fluorinated poly(ether sulfone imide)s with high thermal stability and low dielectric constant10.1016/j.matchemphys.2013.10.012 ↗
29. Construction of a new continuous proton transport channel through a covalent crosslinking reaction between carboxyl and amino groups10.1016/j.ijhydene.2013.06.004 ↗
30. Novel hybrid acid-base membranes based on sulfonated poly(arylene ether sulfone), tetraethoxysilane and (3-aminopropyl)triethoxysilane for fuel cell application, High Perform
31. A comparative study of water uptake by and transport through ionomeric fuel cell membranes10.1149/1.2220749 ↗
32. Fluorene-based poly(arylene ether sulfone)s containing clustered flexible pendant sulfonic acids as proton exchange membranes10.1021/ma2015968 ↗
33. Phosphonic acid grafted poly(ethyleneimine)-silica composite polymer electrolyte membranes by epoxide ring opening: improved conductivity and water retention at high temperature10.1016/j.ijhydene.2015.08.074 ↗
34. Synthesis and properties of hexafluoroisopropylidene-containing sulfonated poly(arylene thioether phosphine oxide)s for proton exchange membranes10.1016/j.ijhydene.2009.12.137 ↗
35. A novel method for fabricating polyelectrolyte complex/inorganic nanohybrid membranes with high isopropanol dehydration performance10.1016/j.memsci.2009.09.003 ↗
36. Synthesis and sulfonation of poly(arly ethers) containing triphenyl methane and tetraphenyl methane moieties from isocynate-masked bisphenols10.1021/ma035825i ↗
37. Electrochemical properties of sulfonated PEEK used for ion exchange membranes10.1016/j.memsci.2004.12.051 ↗
38. End-group cross-linked polybenzimidazole blend membranes for high temperature proton exchange membrane10.1016/j.memsci.2012.08.058 ↗
39. Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker10.1016/j.jpowsour.2013.12.116 ↗
40. Synthesis of novel cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells10.1016/j.memsci.2013.04.072 ↗
41. Preparation, characterization and properties of proton exchange nanocomposite membranes based on poly(vinyl alcohol) and poly(sulfonic acid)-grafted silica nanoparticles10.1016/j.ijhydene.2012.07.079 ↗
42. Cross-linked sulfonated poly(ether imide)/silica organic-inorganic hybrid materials: proton exchange membrane properties10.1039/C4RA02137A ↗
43. High temperature proton exchange membranes based on poly(arylene ether)s with benzimidazole side groups for fuel cells10.1039/c2jm32093b ↗
44. Poly(benzimidazole)-epoxide crosslink membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2011.09.049 ↗
45. Crosslinked polybenzimidazole via a Diels–Alder reaction for proton conducting membranes10.1039/c2jm33725h ↗
46. High performance sulfonated poly(phthalazinone ether phosphine oxide)s for proton exchange membranes10.1016/j.memsci.2013.07.019 ↗
47. Preparation and characterization of sulfonated poly(arylene ether ketone) copolymers with pendant sulfoalkyl groups as proton exchange membranes10.1016/j.jpowsour.2014.03.023 ↗
48. MnO2/SiO2–SO3H nanocomposite as hydrogen peroxide scavenger for durability improvement in proton exchange membranes10.1016/j.memsci.2009.09.031 ↗
49. Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process10.1016/j.jpowsour.2009.11.034 ↗
50. Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine10.1016/j.memsci.2012.09.040 ↗
51. Synthesis and properties poly(arylene ether sulfone)s with pendant hyper-sulfonic acid10.1039/C5RA02107C ↗
52. Pervaporation membranes in direct methanol fuel cells10.1016/S0376-7388(98)00264-6 ↗
53. Proton conductivity: materials and applications10.1021/cm950192a ↗
54. Recent Development of polymer electrolyte membranes for fuel cells10.1021/cr200035s ↗
55. Preparation and behavior of “molecular compound” through covalent crosslinking between amino and sulfonic groups in single copolymers10.1007/s10965-014-0423-6 ↗
56. Proton exchange membranes modified with sulfonated silica nanoparticles for direct methanol fuel cells10.1016/j.memsci.2007.03.007 ↗
57. [Perfluorosulfonate ionomer]/[SiO2-TiO2] nanocomposites via polymer-in situ sol-gel chemistry: sequential alkoxide procedure10.1002/(SICI)1099-0488(19960415)34:5<873::AID-POLB6>3.0.CO;2-N ↗
58. A capillary water retention effect to improve medium-temperature fuel cell performance10.1016/j.elecom.2013.03.018 ↗
59. A clustered sulfonated poly(ether sulfone) based on a new fluorine-based bisphenol monomer10.1039/c2jm34414a ↗
60. Analysis of direct methanol fuel cell (DMFC)-performance via FTIR spectroscopy of cathode exhaust10.1002/fuce.200332217 ↗
61. Influence of sulfonated SiO2 in sulfonated polyether ether ketone nanocomposite membrane in microbial fuel cell10.1016/j.fuel.2015.07.002 ↗