journal article·2016-09Open access

On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries: Part I. Low-order thermal modelling

Robert R. Richardson, Shi Zhao, David A. Howey

Abstract

Estimating the temperature distribution within Li-ion batteries during operation is critical for safety and control purposes. Although existing control-oriented thermal models - such as thermal equivalent circuits (TEC) - are computationally efficient, they only predict average temperatures, and are unable to predict the spatially resolved temperature distribution throughout the cell. We present a low-order 2D thermal model of a cylindrical battery based on a Chebyshev spectral-Galerkin (SG) method, capable of predicting the full temperature distribution with a similar efficiency to a TEC. The model accounts for transient heat generation, anisotropic heat conduction, and non-homogeneous convection boundary conditions. The accuracy of the model is validated through comparison with finite element simulations, which show that the 2-D temperature field (r, z) of a large format (64 mm diameter) cell can be accurately modelled with as few as 4 states. Furthermore, the performance of the model for a range of Biot numbers is investigated via frequency analysis. For larger cells or highly transient thermal dynamics, the model order can be increased for improved accuracy. The incorporation of this model in a state estimation scheme with experimental validation against thermocouple measurements is presented in the companion contribution (Part II).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery10.1016/j.jpowsour.2009.10.105 ↗
2. Expanding the operational limits of the single-point impedance diagnostic for internal temperature monitoring of lithium-ion batteries10.1016/j.electacta.2015.06.003 ↗
3. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
4. Thermal management of cylindrical batteries investigated using wind tunnel testing and computational fluid dynamics simulation10.1016/j.jpowsour.2013.04.073 ↗
5. Parameterization and observability analysis of scalable battery clusters for onboard thermal management
6. A lumped-parameter electro-thermal model for cylindrical batteries10.1016/j.jpowsour.2014.01.097 ↗
7. Mahamud · 2011
8. Thermal modeling and experimental validation of a large prismatic Li-ion battery
9. Adaptive Kalman filtering based internal temperature estimation with an equivalent electrical network thermal model for hard-cased batteries10.1016/j.jpowsour.2015.05.087 ↗
10. Thermal management of batteries employing active temperature control and reciprocating cooling flow10.1016/j.ijheatmasstransfer.2014.11.079 ↗
11. Lumped parameter thermal model for electrical machines of TEFC design
12. A general cuboidal element for three-dimensional thermal modelling10.1109/TMAG.2010.2043928 ↗
13. A general arc-segment element for three-dimensional thermal modeling10.1109/TMAG.2013.2278866 ↗
14. Methodical considerations for setting up space-resolved lumped-parameter thermal models for electrical machines
15. An accurate mesh-based equivalent circuit approach to thermal modeling10.1109/TMAG.2013.2282047 ↗
16. A three-dimensional thermal abuse model for lithium-ion cells10.1016/j.jpowsour.2007.04.018 ↗
17. Battery thermal models for hybrid vehicle simulations10.1016/S0378-7753(02)00200-8 ↗
18. Thermal-electrochemical modeling of battery systems10.1149/1.1393625 ↗
19. Analysis of electrochemical and thermal behavior of Li-ion cells10.1149/1.1526512 ↗
20. a. Jain, an experimentally validated transient thermal model for cylindrical Li-ion cells10.1016/j.jpowsour.2014.07.118 ↗
21. Modeling of steady-state and transient thermal performance of a Li-ion cell with an axial fluidic channel for cooling10.1002/er.3274 ↗
22. A model order reduction method for the temperature estimation in a cylindrical Li-ion battery cell
23. A reduced-order model for the thermal dynamics of Li-ion battery cells
24. A computationally efficient thermal model of cylindrical battery cells for the estimation of radially distributed temperatures
25. The estimation of temperature distribution in cylindrical battery cells under unknown cooling conditions
26. Battery internal temperature estimation by combined impedance and surface temperature measurement10.1016/j.jpowsour.2014.04.129 ↗
27. Sensorless battery internal temperature estimation using a Kalman filter with impedance measurement10.1109/TSTE.2015.2420375 ↗
28. Hahn · 2012
29. Synchronisation using wireless trigger-broadcast for impedance spectroscopy of battery cells
30. Shen · 2011
31. Trefethen · 2000 · vol. 10
32. Efficient macro-micro scale coupled modeling of batteries10.1149/1.2032427 ↗
33. Coordinate transformation, orthogonal collocation, model reformulation and simulation of electrochemical-thermal behavior of lithium-ion battery stacks10.1149/2.058112jes ↗
34. Lithium ion cell modeling using orthogonal collocation on finite elements10.1016/j.jpowsour.2012.06.043 ↗
35. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended kalman filter10.1016/j.jpowsour.2015.07.019 ↗
36. Efficient simulation and model reformulation of two-dimensional electrochemical thermal behavior of lithium-ion batteries10.1149/2.0341506jes ↗
37. An efficient direct solver for multidimensional elliptic Robin boundary value problems using a Legendre spectral-Galerkin method10.1016/j.camwa.2011.12.050 ↗
38. Thermal impedance spectroscopy-a method for the thermal characterization of high power battery cells10.1016/j.jpowsour.2012.07.144 ↗
39. Design optimization of electric vehicle battery cooling plates for thermal performance10.1016/j.jpowsour.2011.06.090 ↗