journal article·2015-01Open access

Suppression of polysulfide dissolution by polypyrrole modification of sulfur-based cathodes in lithium secondary batteries

Natsuki Nakamura, Tokihiko Yokoshima, Hiroki Nara, Toshiyuki Momma, Tetsuya Osaka

Abstract

Abstract In order to solve the problem of polysulfide dissolution into the electrolyte on sulfur-based cathodes, we propose a novel method of modifying the S cathode by coating it with a polypyrrole (PPy) film, which is prepared by oxidative electropolymerization using a solution consisting of, 1-methyl-1-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and pyrrole. The PPy film demonstrates a high Li+ transport number. The film also exhibits a superior ability to inhibit polysulfide dissolution into the electrolyte during the charge–discharge cycles. Furthermore, the charge–discharge properties of the coated cathode is evaluated using an electrolyte consisting of 1.0 M LiTFSI in a mixture of 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL), which is known to easily dissolve polysulfides. Because of the surface modification with the PPy film, the cathode exhibits excellent specific capacities of 823 and 354 mAh g−1 at C-rates of 0.1 and 1.0 C, respectively, with high coulombic efficiency. Thus, the strategy of coating the S cathode with PPy is successful in inhibiting the polysulfides dissolution even in electrolytes known to easily dissolve polysulfides, besides allowing high C-rate operation. Further, the modification of the S cathode allows the selection of a suitable electrolyte based on the anode, rather than being limited by the cathode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Battery Materials and Technologies · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Zhang · J. Power Sources · 2013 · 231 · 15310.1016/j.jpowsour.2012.12.102 ↗
2. Mikhaylik · ECS Trans. · 2010 · 25 · 2310.1149/1.3414001 ↗
3. Schuster · Angew. Chem. · 2012 · 51 · 359110.1002/anie.201107817 ↗
4. Ji · J. Am. Chem. Soc. · 2011 · 133 · 1852210.1021/ja206955k ↗
5. Xin · J. Am. Chem. Soc. · 2012 · 134 · 1851010.1021/ja308170k ↗
6. Yoshida · J. Am. Chem. Soc. · 2011 · 133 · 1312110.1021/ja203983r ↗
7. Park · J. Phys. Chem. C · 2013 · 117 · 2053110.1021/jp408037e ↗
8. Wu · J. Phys. Chem. C · 2011 · 115 · 605710.1021/jp1114724 ↗
9. Yang · ACS Nano · 2011 · 5 · 918710.1021/nn203436j ↗
10. Sadki · Chem. Soc. Rev. · 2000 · 29 · 28310.1039/a807124a ↗
11. Osaka · Chem. Lett. · 1993 · 22 · 64910.1246/cl.1993.649 ↗
12. Bakker · Chem. Rev. · 1997 · 97 · 308310.1021/cr940394a ↗
13. Pringle · Polymer · 2004 · 45 · 144710.1016/j.polymer.2004.01.006 ↗
14. Diaz · J. Electroanal. Chem. · 1981 · 129 · 11510.1016/S0022-0728(81)80008-3 ↗
15. Momma · J. Electrochem. Soc. · 1994 · 141 · 232610.1149/1.2055120 ↗
16. Syritski · Electrochim. Acta · 2003 · 48 · 140910.1016/S0013-4686(03)00018-5 ↗
17. Khalkhali · Russ. J. Electrochem. · 2005 · 41 · 95010.1007/s11175-005-0162-4 ↗
18. Barchasz · Anal. Chem. · 2012 · 84 · 397310.1021/ac2032244 ↗