journal article·2012-11

High cyclability of ionic liquid-produced TiO2 nanotube arrays as an anode material for lithium-ion batteries

Huaqing Li, Surendra K. Martha, Raymond R. Unocic, Huimin Luo, Sheng Dai, Jun Qu

Publisher page

Abstract

Abstract TiO 2 nanotubes (NTs) are considered as a potential SEI-free anode material for Li-ion batteries to offer enhanced safety. Organic solutions, dominatingly ethylene glycol (EG)-based, have widely been used for synthesizing TiO 2 NTs via anodization because of their ability to generate long tubes and well-aligned structures. However, it has been revealed that the EG-produced NTs are composited with carbonaceous decomposition products of EG, release of which during the tube crystallization process inevitably causes nano-scale porosity and cracks. These microstructural defects significantly deteriorate the NTs' charge transport efficiency and mechanical strength/toughness. Here we report using ionic liquids (ILs) to anodize titanium to grow low-defect TiO 2 NTs by reducing the electrolyte decomposition rate (less IR drop due to higher electrical conductivity) as well as the chance of the decomposition products mixing into the TiO 2 matrix (organic cations repelled away). Promising electrochemical results have been achieved when using the IL-produced TiO 2 NTs as an anode for Li-ion batteries. The ILNTs demonstrated excellent capacity retention without microstructural damage for nearly 1200 cycles of charge–discharge, while the NTs grown in a conventional EG solution totally pulverized in cycling, resulting in significant capacity fade.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced battery technologies research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Su · J. Mater. Sci. · 2012 · 47 · 251910.1007/s10853-011-5974-x ↗
2. Yang · Chem. Rev. · 2011 · 111 · 357710.1021/cr100290v ↗
3. Natarajan · Electrochim. Acta · 1998 · 43 · 337110.1016/S0013-4686(97)10140-2 ↗
4. Ryu · Electrochim. Acta · 2012 · 61 · 1910.1016/j.electacta.2011.11.042 ↗
5. Bavykin · Adv. Mater. · 2006 · 18 · 280710.1002/adma.200502696 ↗
6. Wagemaker · J. Am. Chem. Soc. · 2002 · 125 · 84010.1021/ja028165q ↗
7. Xiong · J. Phys. Chem. Lett. · 2011 · 2 · 256010.1021/jz2012066 ↗
8. Xu · Electrochim. Acta · 2007 · 52 · 804410.1016/j.electacta.2007.06.077 ↗
9. Bao · Electrochem. Commun. · 2007 · 9 · 123310.1016/j.elecom.2007.01.028 ↗
10. Lan · Adv. Funct. Mater. · 2005 · 15 · 131010.1002/adfm.200400353 ↗
11. Hibino · J. Power Sources · 2004 · 126 · 13910.1016/j.jpowsour.2003.08.025 ↗
12. Kuhn · J. Power Sources · 2001 · 92 · 22110.1016/S0378-7753(00)00530-9 ↗
13. Ortiz · Chem. Mater. · 2008 · 21 · 6310.1021/cm801670u ↗
14. Wang · Adv. Funct. Mater. · 2008 · 18 · 378710.1002/adfm.200800635 ↗
15. Yoriya · J. Mater. Chem. · 2011 · 21
16. Ghicov · Chem. Commun. · 2009
17. Prakasam · J. Phys. Chem. C · 2007 · 111 · 723510.1021/jp070273h ↗
18. Macak · Angew. Chem. Int. Ed. · 2005 · 44 · 746310.1002/anie.200502781 ↗
19. Ji · Electrochem. Commun. · 2011 · 13 · 101310.1016/j.elecom.2011.06.030 ↗
20. Albu · Adv. Mater. · 2008 · 20 · 413510.1002/adma.200801189 ↗
21. Li · J. Mater. Chem. · 2011 · 21
22. Wang · J. Phys. Chem. C · 2011 · 115 · 252910.1021/jp1087509 ↗
23. Fattakhova-Rohlfing · Adv. Funct. Mater. · 2007 · 17 · 12310.1002/adfm.200600425 ↗
24. Zhao · Electrochem. Commun. · 2007 · 9 · 69710.1016/j.elecom.2006.11.001 ↗
25. Kim · Electrochem. Commun. · 2008 · 10 · 166910.1016/j.elecom.2008.08.035 ↗