Phosphoric acid distribution and its impact on the performance of polybenzimidazole membranes
Source abstract
Abstract
Abstract Phosphoric acid doped polybenzimidazole (PBI) is the most common membrane material for high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC). The PBI membrane is usually doped by immersion in hot phosphoric acid. Immersion time and acid temperature affect the doping level of the membrane. In this work we studied the influence of doping time and temperature on the ex-situ and in-situ proton conductivities of poly (2, 5-benzimidazole) (AB-PBI) membranes as well as the fuel cell performance. Confocal Raman microscopy was employed to spatially resolve the acid distribution within the AB-PBI membranes. Therefore the interactions between the basic nitrogen-sides of the AB-PBI polymer and the phosphoric acid protons were investigated. We found that membranes with a 6 h doping time had significantly higher proton conductivity than those doped for only 3 h. In terms of absolute acid up-take, however, the difference was rather small. This result shows that the doping level alone does not define the conductivity of the membrane. The conductivity is also influenced by the micro acid distribution within the membrane. Highest membrane conductivity and fuel cell performance with fumapem AM cross-linked membranes were achieved with a doping time of 6 h and a doping temperature of 120 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Conducting polymers and applications · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Asensio · Chem. Soc. Rev. · 2010 · 39 · 321010.1039/b922650h ↗
2. Zhang · J. Power Sources · 2006 · 160 · 87210.1016/j.jpowsour.2006.05.034 ↗
3. Borup · Chem. Rev. · 2007 · 107 · 390410.1021/cr050182l ↗
4. Yang · J. Power Sources · 2001 · 103 · 110.1016/S0378-7753(01)00812-6 ↗
5. Bose · Prog. Polym. Sci. · 2011 · 36 · 81310.1016/j.progpolymsci.2011.01.003 ↗
6. Wang · Electrochim. Acta · 1996 · 41 · 19310.1016/0013-4686(95)00313-4 ↗
7. Wainright · J. Electrochem. Soc. · 1995 · 142 · L12110.1149/1.2044337 ↗
8. Li · Fuel Cells · 2004 · 4 · 14710.1002/fuce.200400020 ↗
9. Lobato · J. Memb. Sci. · 2006 · 280 · 35110.1016/j.memsci.2006.01.049 ↗
10. He · J. Memb. Sci. · 2006 · 277 · 3810.1016/j.memsci.2005.10.005 ↗
11. Wainright · 2010
12. Kim · Macromol. Rapid Commun. · 2004 · 25 · 89410.1002/marc.200300288 ↗
13. Linares · ECS Trans. · 2011 · 41 · 157910.1149/1.3635690 ↗
14. Asensio · J. Memb. Sci. · 2004 · 241 · 8910.1016/j.memsci.2004.03.044 ↗
15. Xing · J. New. Mater. Electrochem. Syst. · 1999 · 2 · 95
16. Ma · J. Electrochem. Soc. · 2004 · 151 · A810.1149/1.1630037 ↗
17. Qingfeng · J. Appl. Electrochem. · 2001 · 31 · 77310.1023/A:1017558523354 ↗
18. Li · Solid State Ion. · 2004 · 168 · 17710.1016/j.ssi.2004.02.013 ↗
19. Silverstein · 2005
20. Deabate · Energy Environ. Sci. · 2012 · 5 · 882410.1039/c2ee21834h ↗
21. Conti · Phys. Chem. Chem. Phys. · 2012 · 14 · 1002210.1039/c2cp40553a ↗
22. Quartarone · Fuel Cells · 2009 · 9 · 34910.1002/fuce.200800149 ↗
23. Sannigrahi · Polymer · 2010 · 51 · 592910.1016/j.polymer.2010.10.013 ↗
24. Mack · J. Power Sources · 2014 · 255 · 43110.1016/j.jpowsour.2014.01.032 ↗
25. Li · Fuel Cells · 2008 · 8 · 18810.1002/fuce.200800007 ↗
26. Oono · J. Power Sources · 2009 · 189 · 94310.1016/j.jpowsour.2008.12.115 ↗
27. Li · Prog. Polym. Sci. · 2009 · 34 · 44910.1016/j.progpolymsci.2008.12.003 ↗
28. Wannek · J. Power Sources · 2009 · 192 · 25810.1016/j.jpowsour.2009.03.051 ↗
29. Mack · ECS Trans. · 2013 · 58 · 88110.1149/05801.0881ecst ↗
30. Giffin · Int. J. Hydrogen Energy · 2014 · 39 · 277610.1016/j.ijhydene.2013.04.152 ↗