journal article·2020-08

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Zifei Li, Xiuyi Lin, Hebin Zhou, Lidan Xing, Guangyuan Lan, Wenguang Zhang, Jiawei Chen, Mingzhu Liu, Qiming Huang, Weishan Li

Publisher page

Abstract

Abstract As a promising cathode candidate in high energy density lithium-ion batteries, Nickel-rich cathode LiNi0.8Co0.15Al0.05O2 (LNCAO) has received extensive attention for its high specific capacity and low cost, while it is subject to fast capacity fading due to the inferior interphasial stability. This work aims to improve the cyclic stability of LNCAO cathode by using a multifunctional electrolyte additive, p-toluenesulfonylmethyl isocyanide (TOSMIC). DFT calculation shows that the high reduction activity of TOSMIC additive is mainly contributed by its sulfone group, while the high oxidation activity is primarily caused by its phenyl group. The obtained experimental results indicate that TOSMIC simultaneously generates effective cathode electrolyte interphase and solid electrolyte interphase layer on LNCAO and graphite surface, respectively, leading to greatly enhanced cyclic stability of LNCAO cathode and increased rate performance of graphite anode. On the other hand, application of TOSMIC could suppress the hydrolyzation reaction of LiPF6, and therefore, hindering the generation of harmful product HF and dissolution of transition metal from LNCAO cathode during cycling. Application of such multifunctional electrolyte additive significantly improves the cycle life of the LNCAO/graphite full cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Insight into the capacity fading of layered lithium-rich oxides and its suppression via a film-forming electrolyte additive10.1039/C8RA03852J ↗
2. Improving electrochemical stability and low-temperature performance with water/acetonitrile hybrid electrolytes
3. Stabilizing a high-voltage lithium-rich layered oxide cathode with a novel electrolyte additive10.1021/acsami.9b07441 ↗
4. Novel electrolyte additives for improving the stability of high voltage electrode/electrolyte interface[C]//Meeting Abstracts
5. Characterization of LiNi0.85Co0.10M0.05O2 (M= Al, Fe) as a cathode material for lithium secondary batteries10.1016/S0378-7753(01)00516-X ↗
6. Understanding impacts of environmental relative humidity to the cell performance based on LiNi0.8Co0.15Al0.05O2 cathode10.1016/j.matchemphys.2018.02.031 ↗
7. Lithium batteries and cathode materials10.1021/cr020731c ↗
8. Insight into the interaction between Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode and BF4−-introducing electrolyte at 4.5 V high voltage10.1016/j.jechem.2019.04.011 ↗
9. Improved cycling performance of LiNi0.8Co0.15Al0.05O2/Al2O3 with core-shell structure synthesized by a heterogeneous nucleation-and-growth process10.1007/s11581-016-1750-x ↗
10. N-Allyl-N, N-Bis(trimethylsilyl) amine as a novel electrolyte additive to enhance the interfacial stability of a Ni-rich electrode for Lithium-ion batteries10.1021/acsami.8b00913 ↗
11. Electrolyte additives for lithium metal anodes and rechargeable lithium metal batteries: progress and perspectives10.1002/anie.201712702 ↗
12. NCA cathode material: synthesis methods and performance enhancement efforts10.1088/2053-1591/aae167 ↗
13. Supply risks associated with LIBs materials10.1016/j.jclepro.2017.10.122 ↗
14. Surface/interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
15. Effect of cobalt content on the electrochemical properties and structural stability of NCA type cathode materials10.1039/C8CP03237H ↗
16. Enhancing the thermal and upper voltage performance of Ni-Rich cathode material by a homogeneous and facile coating method: spray-Drying Coating with Nano-Al2O310.1021/acsami.6b05629 ↗
17. Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive10.1016/j.electacta.2018.09.077 ↗
18. Lithium ion battery production10.1016/j.jct.2011.09.005 ↗
19. Unraveling the degradation process of LiNi0.8Co0.15Al0.05O2 electrodes in commercial lithium ion batteries by electronic structure investigations10.1021/acsami.5b03191 ↗
20. Understanding the effects of a multi-functionalized additive on the cathode-electrolyte interfacial stability of Ni-rich materials10.1016/j.jpowsour.2015.10.051 ↗
21. Insight into the mechanism of improved interfacial properties between electrodes and electrolyte in the graphite/LiNi0.6Mn0.2Co0.2O2 cell via incorporation of 4-propyl-[1, 3, 2] dioxathiolane-2, 2-dioxide (PDTD)10.1021/acsami.8b01165 ↗
22. Identifying the distribution of Al3+ in LiNi0. 8Co0. 15Al0. 05O210.1021/acs.chemmater.6b02797 ↗
23. Stabilizing the electrode/electrolyte interface of LiNi0.8Co0.15Al0.05O2 through tailoring aluminum distribution in microspheres as long-life, high-rate, and safe cathode for lithium-ion batteries10.1021/acsami.7b05986 ↗
24. Constructing double buffer layers to boost electrochemical performances of NCA cathode for ASSLB10.1016/j.ensm.2018.10.003 ↗
25. New insight into Ni-rich layered structure for next-generation Li rechargeable batteries10.1002/aenm.201701788 ↗
26. Intergranular cracking as a major cause of long-term capacity fading of layered cathodes10.1021/acs.nanolett.7b00379 ↗
27. Structural exfoliation of layered cathode under high voltage and its suppression by interface film derived from electrolyte additive10.1021/acsami.7b00032 ↗
28. Vinyltriethoxysilane as an electrolyte additive to improve the safety of lithium-ion batteries10.1039/C6TA10210G ↗
29. Differentiating contributions to “ion transfer” barrier from interphasial resistance and Li+ desolvation at electrolyte/graphite interface10.1021/la1009994 ↗
30. Effect of TiO2-coating on the electrochemical performances of LiCo1/3Ni1/3Mn1/3O210.1016/j.jpowsour.2009.02.063 ↗
31. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
32. High stability graphite/electrolyte interface created by a novel electrolyte additive: a theoretical and experimental study10.1016/j.electacta.2018.01.018 ↗
33. Some studies on electrolytes for lithium ion batteries10.1016/j.jpowsour.2005.03.092 ↗
34. Filming mechanism of lithium-carbon anodes in organic and inorganic electrolytes10.1016/0378-7753(94)02073-C ↗
35. Designing low impedance interface films simultaneously on anode and cathode for high energy batteries10.1002/aenm.201800802 ↗
36. A comparative study of Si-containing electrolyte additives for lithium ion battery: which one is better and why is it better10.1016/j.jpowsour.2016.12.112 ↗
37. Improvement of cycle stability for high-voltage lithium-ion batteries by in-situ growth of SEI film on cathode10.1016/j.nanoen.2014.02.004 ↗
38. Fluorinated solvents for high-voltage electrolyte in lithium-ion battery10.1007/s10008-017-3508-4 ↗
39. Ethylene ethyl phosphate as a multifunctional electrolyte additive for lithium-ion batteries10.1039/C4RA15899G ↗
40. Understanding and suppressing the destructive cobalt (ii) species in graphite interphase10.1021/acsami.9b08949 ↗
41. Tailoring low-temperature performance of a lithium-ion battery via rational designing interphase on an anode10.1021/acsami.9b12020 ↗
42. Constructing a protective interface film on layered lithium-rich cathode using an electrolyte additive with special molecule structure10.1021/acsami.6b09554 ↗
43. Understanding how nitriles stabilize electrolyte/electrode interface at high voltage10.1021/acs.jpclett.7b02734 ↗
44. Maintaining structural integrity of 4.5 V lithium cobalt oxide cathode with fumaronitrile as a novel electrolyte additive10.1016/j.jpowsour.2016.10.103 ↗
45. Structural exfoliation of layered cathode under high voltage and its suppression by interface film derived from electrolyte additive10.1021/acsami.7b00032 ↗
46. Mechanism of cycling degradation and strategy to stabilize a nickel-rich cathode10.1039/C8TA03041C ↗
47. Converting detrimental HF in electrolytes into a highly fluorinated interphase on cathodes10.1039/C8TA06150E ↗
48. Deciphering the paradox between the Co-intercalation of sodium-solvent into graphite and its irreversible capacity10.1016/j.ensm.2019.12.026 ↗
49. Density functional theory study of the role of anions on the oxidative decomposition reaction of propylene carbonate10.1021/jp206153n ↗
50. Why do sulfone-based electrolytes show stability at high voltages? Insight from density functional theory10.1021/jz401726p ↗
51. Insight into the interaction between layered lithium-rich oxide and additive-containing electrolyte10.1016/j.jpowsour.2016.12.012 ↗
52. Diethyl(thiophen-2-ylmethyl) phosphonate: a novel multifunctional electrolyte additive for high voltage batteries10.1039/C8TA01236A ↗