High current polarization tests on a 9 kW vanadium redox flow battery
Source abstract
Abstract
Abstract Vanadium Redox Flow Batteries are one of the most interesting options for the large energy storage. In spite of the tremendous improvements that have taken place in recent years concerning materials and architectures, laboratory tests under controlled conditions have almost always been confined to small-scale single-cell devices. This paper reports the experimental results obtained on an industrial-size 9 kW/26 kW h 40-cell 600-cm2 stack, during charge and discharge in two working conditions, i.e. fast mode and steady-state mode, representative of real grid operations, which occur e.g. in primary frequency regulation and peak shaving. Results show that current densities as high as 665 mA cm−2 and power densities of 370 mW cm−2 per cell at a specific flow rate of 20.5⋅10−3 cm s−1 can be achieved in the stack at high state of charge, thanks to proper control strategies. A procedure for qualifying such performance has been developed and is here presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. Pellegri · 1978
2. Skyllas-Kazacos · 1986
3. A study of the V(II)/V(IIII) redox couple for redox cell application10.1016/0378-7753(85)80071-9 ↗
4. Vanadium redox flow batteries: potentials and challenges of an emerging storage technology10.1109/MIE.2016.2611760 ↗
5. Redox flow batteries: an engineering perspective10.1109/JPROC.2014.2320317 ↗
6. Weaver
7. Redox flow cells for energy conversion10.1016/j.jpowsour.2006.02.095 ↗
8. Development of the all‐vanadium redox flow battery for energy storage: a review of technological, financial and policy aspects10.1002/er.1863 ↗
9. The chemistry of redox-flow batteries10.1002/anie.201410823 ↗
10. Characterisation of a 200 kW/400 kWh vanadium redox 465 flow battery
11. Application of novel anion-exchange blend membranes (AEBMs) to vanadium redox flow batteries
12. Vanadium redox flow batteries using meta-polybenzimidazole-based membranes of different thicknesses10.1021/acsami.7b10598 ↗
13. Poly(p-phenylene)-based membrane materials with excellent cell efficiencies and durability for use in vanadium redox flow batteries10.1039/C7TA03131A ↗
14. Performance of a vanadium redox flow battery with a VANADion membrane10.1016/j.apenergy.2016.08.001 ↗
15. An improved model of ion selective adsorption in membranes and its application in vanadium redox flow batteries10.1016/j.apenergy.2018.02.042 ↗
16. [Nafion/(WO3)x] hybrid membranes for vanadium redox flow batteries10.1016/j.ssi.2018.01.038 ↗
17. Numerical study on vanadium redox flow battery performance with non-uniformly compressed electrode and serpentine flow field10.1016/j.apenergy.2018.03.058 ↗
18. Experimental study on the performance of a vanadium redox flow battery with non-uniformly compressed carbon felt electrode10.1016/j.apenergy.2018.01.047 ↗
19. A high-performance composite electrode for vanadium redox flow batteries10.1002/aenm.201700461 ↗
20. A high-performance dual-scale porous electrode for vanadium redox flow batteries10.1016/j.jpowsour.2016.06.048 ↗
21. Water-activated graphite felt as a high-performances electrode for vanadium redox flow batteries10.1016/j.jpowsour.2016.12.004 ↗
22. Graphite felt as a versatile electrode material: properties, reaction environment, performance and applications10.1016/j.electacta.2017.11.165 ↗
23. A high-performance carbon nanoparticle-decorated graphite felt electrode for vanadium redox flow batteries10.1016/j.apenergy.2016.05.048 ↗
24. Electrochemical investigation of thermically treated graphene oxides as alectrode materials for vanadium redox flow battery10.1016/j.apenergy.2015.02.073 ↗
25. Particle based method and X-ray computed tomography for pore-scale flow characterization in VRFB electrodes10.1016/j.ensm.2018.04.021 ↗
26. Analysis of flow field design on vanadium redox flow battery performance: development of 3D computational fluid dynamic model and experimental validation10.1016/j.apenergy.2018.06.148 ↗
27. A novel cell design of vanadium redox flow batteries for enhacing energy and power performance10.1016/j.apenergy.2018.04.025 ↗
28. Study of an unitised bidirectional vanadium/air redox flow battery comprising a two-layered cathode10.1016/j.jpowsour.2014.09.177 ↗
29. The influence of electrode and channel configurations on flow battery performance10.1149/2.0941409jes ↗
30. Dramatic performance gains in vanadium redox flow batteries through modified cell architecture10.1016/j.jpowsour.2011.12.026 ↗
31. A technology review of electrodes and reaction mechanisms in vanadium redox flow batteries
32. High performance vanadium redox flow batteries with optimized electrode configuration and membrane selection10.1149/2.051208jes ↗
33. Shape optimization of the corrugated composite bipolar plate (CCBP) for vanadium redox flow batteries (VRFBs)10.1016/j.compstruct.2016.09.030 ↗
34. Development of integrally molded bipolar plates for all-vanadium redox flow batteries10.3390/en9050350 ↗
35. Numerical and experimental study of the flow-by cell for Vanadium Redox Batteries10.1016/j.egypro.2017.12.260 ↗
36. A dynamic performance model for redox-flow batteries involving soluble species10.1016/j.electacta.2008.05.067 ↗
37. Numerical investigations of flow field designs for vanadium redox flow batteries10.1016/j.apenergy.2012.12.041 ↗
38. The effects of design parameters on the charge-discharge performances of iron-choromiun redox flow batteries10.1016/j.apenergy.2016.08.135 ↗
39. Sujali · 2016
40. Nizam · 2016
41. Stack developments in a kW class all vanadium mixed acid redox flow battery at the pacific northwest national laboratory10.1149/2.0281601jes ↗
42. Redox flow batteries for energy storage: a technology review
43. A multistack simulation of shunt currents in vanadium redox flow batteries10.1016/j.jpowsour.2014.03.054 ↗
44. The importance of key operational variables and electrolyte monitoring to the performance of an all vanadium redox flow battery10.1002/jctb.3870 ↗
45. Performance characterization of a vanadium redox flow battery at different operating parameters under a standardized test-bed system10.1016/j.apenergy.2014.10.042 ↗
46. Experimental analysis of discharge characteristics in vanadium redox flow battery10.1016/j.apenergy.2017.08.218 ↗
47. Parametric study and flow rate optimization of all-vanadium redox flow batteries10.1016/j.apenergy.2018.06.094 ↗
48. Practical and commercial issues in the design and manufacture of vanadium flow batteries10.1016/j.jpowsour.2010.12.032 ↗
49. Redox flow battery for energy storage
50. 1 kW/1kWh advanced vanadium redoxflow battery utilizing mixed acid Electrolytes10.1016/j.jpowsour.2013.02.045 ↗
51. Performance of the all-vanadium redox flow battery stack10.1016/j.jiec.2016.10.007 ↗
52. Reedz · 2015 · vol. 163 · A5211
53. Reed · 2016 · vol. 306 · 24
54. Engineering aspects of the design, construction and performance of modular redox flow batteries for energy storage10.1016/j.est.2017.02.007 ↗
55. Developing vanadium redox flow technology on a 9-kW 26-kWh industrial scale test facility: design review and early experiments10.1016/j.apenergy.2018.09.021 ↗
56. An alternative low-loss stack topology for vanadium redox flow battery: comparative assessment10.1016/j.jpowsour.2016.11.042 ↗
57. Battery energy storage system (BESS) and battery management system (BMS) for grid-scale Application10.1109/JPROC.2014.2317451 ↗
58. A novel ultrasonic velocity sensing approach to monitoring state of charge of vanadium redox flow battery10.1016/j.apenergy.2016.08.125 ↗
59. Effects of SOC-dependent electrolyte viscosity on performance of vanadium redox flow batteries10.1016/j.apenergy.2014.05.034 ↗
60. Investigation of the use of electrolyte viscosity for online styate-of-charge monitoring design in vanadium redox flow battery10.1016/j.apenergy.2017.12.009 ↗
61. Online state of charge and model parameter co - estimation based on a novel multi-timescale estimator for vanadium redox flow battery10.1016/j.apenergy.2016.03.103 ↗
62. In situ potential distribution measurement and validated model for All-Vanadium Redox Flow Battery10.1149/2.0211601jes ↗
63. A vanadium redox flow battery model incorporating the effect of ion concentrations on ion mobility10.1016/j.apenergy.2015.08.028 ↗
64. Thermodynamic derivation of open circuit voltage in vanadium redox flow batteries10.1016/j.jpowsour.2015.05.049 ↗
65. Effects of the electric field on ion crossover in vanadium redox flow batteries10.1016/j.apenergy.2015.02.038 ↗
66. Zero dimensional dynamic model of vanadium redox flow battery cell incorporating all modes of vanadium ions crossover10.1016/j.apenergy.2018.05.124 ↗
67. State of charge monitoring methods for vanadium redox flow battery control10.1016/j.jpowsour.2011.06.080 ↗
68. Vanadium(III)/vanadium(II) and hydrogen evolution thermodynamic behavior at the negative of the all-vanadium redox flow batteries10.1149/2.0751712jes ↗
69. Control of electrolyte flow rate for the vanadium redox flow battery by gain scheduling10.1016/j.est.2017.10.005 ↗
70. Dynamic control strategy for the electrolyte flow rate of vanadium redox flow batteries10.1016/j.apenergy.2017.07.065 ↗
71. Volumetric electrolyte flow rate control in vanadium redox flow batteries using a variable flow factor
72. Dynamic flow rate control for vanadium redox flow batteries10.1016/j.egypro.2017.03.952 ↗
73. Extended Kalman filter method for state of charge estimation of vanadium redox flow battery using thermal-dependent electrical model10.1016/j.jpowsour.2014.03.110 ↗
74. A selective hybrid stochastic strategy for fuel-cell multi-parameter identification10.1016/j.jpowsour.2016.09.131 ↗
75. Design and experimental validation of a generalised electrical equivalent model of Vanadium Redox Flow Battery for interfacing with renewable energy sources10.1016/j.est.2017.07.016 ↗
76. Polarization curve measurements combined with potential probe sensing for determining current density distribution in vanadium redox-flow batteries10.1016/j.jpowsour.2016.01.011 ↗
77. Aging studies of vanadium redox flow batteries10.1149/1.3589916 ↗
78. Lithium-based vs. vanadium redoc flow batteries - a comparison for home storage systems10.1016/j.egypro.2016.10.095 ↗
79. A review of energy storage technologies for wind power applications10.1016/j.rser.2012.01.029 ↗
80. Progress in redox flow batteries, remaining challenges and their applications in energy storage10.1039/c2ra21342g ↗
81. Smart grid energy storage controller for frequency regulation and peak shaving, using a vanadium redox flow battery10.1016/j.ijepes.2016.01.025 ↗
82. Effects of shunt current scan rate on the polarization curve of vanadium redox flow batteries
83. Investigations on the self-discharge process in vanadium flow battery10.1016/j.jpowsour.2015.06.123 ↗
84. Dynamic modelling of the effects of ion diffusion and side reaction.s on the capacity loss for vanadium redox flow battery10.1016/j.jpowsour.2011.09.003 ↗
85. Standby thermal model of a vanadium redox flow battery stack with crossover and shunt-current effects10.1016/j.apenergy.2019.02.067 ↗
86. Shunt current loss of the vanadium redox flow battery10.1016/j.jpowsour.2011.08.033 ↗
87. Design trade-offs among shunt current, pumping loss and compactness in the piping system of a multi-stack vanadium flow battery10.1016/j.jpowsour.2015.06.138 ↗
88. Numerical and experimental studies of stack shunt current for vanadium redox flow battery10.1016/j.apenergy.2015.04.080 ↗
89. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
90. Development of carbon composite bipolar plate (BP) for vanadium redox flow battery (VRFB)10.1016/j.compstruct.2013.11.002 ↗
91. A novel electrode-bipolar plate assembly for vanadium redox flow battery applications10.1016/j.jpowsour.2007.09.006 ↗
92. Determining the limiting current density of vanadium redox flow batteries10.3390/en7095863 ↗
93. Thermal modeling of industrial-scale vanadium redox flow batteries in high-current operations10.1016/j.jpowsour.2019.03.080 ↗