A comprehensive study on improved power materials for high-temperature thermoelectric generators
Source abstract
Abstract
Abstract Dense Ca3Co4O9-NaxCoO2-Bi2Ca2Co2O9 (CCO-NCO-BCCO) nanocomposites were produced from sol-gel derived Ca2.25Na0.3Bi0.35Tb0.1Co4O9 powder by four methods: Hot-pressing (HP), spark plasma sintering (SPS) and pressureless sintering in air or O2 atmosphere. Nanocomposites from HP and SPS revealed nanosized grains and showed a thermoelectric power factor of 4.8 and 6.6 μW ⋅ cm−1 ⋅ K−2, respectively, at 1073 K in air. A dense 2D nanocomposite with structures on multiple length scales and enhanced thermoelectric properties was obtained from pressureless sintering in O2 atmosphere. The resulting 2D nanocomposite enabled the simultaneous increase in isothermal electrical conductivity σ and Seebeck coefficient α, and showed a thermoelectric power factor of 8.2 μW ⋅ cm−1 ⋅ K−2 at 1073 K in air. The impact of materials with enhanced electrical conductivity and power factor on the electrical power output of thermoelectric generators was verified in prototypes. A high electrical power output and power density of 22.7 mW and 113.5 mW ⋅ cm−2, respectively, were obtained, when a hot-side temperature of 1073 K and a temperature difference of 251 K were applied. Different p- and n-type materials were used to verify the effect of the thermoelectric figure-of-merit z T and power factor on the performance of thermoelectric generators.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. A direct entropic approach to uniform and spatially continuous dynamical models of thermoelectric devices
3. Thermoelectric material tensor derived from the Onsager - de Groot - Callen model
4. M. Bittner, N. Kanas, R. Hinterding, F. Steinbach, D. Groeneveld, P. Wemhoff, K. Wiik, M.-A. Einarsrud, A. Feldhoff, Triple-phase ceramic 2D nanocomposite with enhanced thermoelectric properties, J. Eur. Ceram. Soc. https://doi.org/10.1016/j.jeurceramsoc.2018.10.023.10.1016/j.jeurceramsoc.2018.10.023 ↗
5. A high-temperature thermoelectric generator based on oxides
6. Wo we really need high thermoelectric figure of merit? A critical appraisal to the power conversion efficiency of thermoelectric materials10.1063/1.3634018 ↗
7. Ioffe · 1957
8. Nanstructured thermoelectrics: the new paradigm?10.1021/cm902195j ↗
9. Nanoengineering thermoelectrics for 21st century: energy harvesting and other trends in the field10.1016/j.rser.2013.03.008 ↗
10. Rational design of advanced thermoelectric materials10.1002/aenm.201200514 ↗
11. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
12. New directions for low-dimensional thermoelectric materials10.1002/adma.200600527 ↗
13. Resonant levels in bulk thermoelectric semiconductors10.1039/C1EE02612G ↗
14. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
15. High ZT in p-type (PbTe)1−2x(PbSe)x(PbS)x thermoelectric materials10.1021/ja4121583 ↗
16. Superior thermoelectric performance in PbTe-PbS pseudo-binary: extremely low thermal conductivity and modulated carrier concentration10.1039/C5EE01147G ↗
17. Band engineering of high performance p-type FeNbSb based half-Heusler thermoelectric materials for figure of merit zT > 110.1039/C4EE03042G ↗
18. A high thermoelectric figure of merit ZT > 1 in Ba heavily doped BiCuSeO oxyselenides10.1039/c2ee22622g ↗
19. Enhanced thermoelectric performance of Ca-doped BiCuSeO in a wide temperature range10.1039/c3ta11806a ↗
20. Enhanced thermoelectric properties of Pb-doped BiCuSeO ceramics10.1002/adma.201301675 ↗
21. Dual vacancies: an effective strategy realizing synergistic optimization of thermoelectric property in BiCuSeO10.1021/jacs.5b01863 ↗
22. Influence of Te substitution on the structural and electronic properties of thermoelectric BiCuSeO10.1039/c2ta00818a ↗
23. Toward the enhancement of thermoelectric properties of lamellar Ca3Co4O9 by edge-free spark plasma texturing10.1016/j.scriptamat.2011.11.004 ↗
24. Synergistically optimizing electrical and thermal transport properties of BiCuSeO via a dual-doping approach10.1002/aenm.201502423 ↗
25. Studies on the thermal stability of BiCuSeO10.1016/j.jssc.2014.11.001 ↗
26. High thermoelectric performance realized in a BiCuSeO system by improving carrier mobility through 3D modulation doping10.1021/ja507945h ↗
27. Rowe · 1995
28. High thermoelectric performance of dually doped ZnO ceramics10.1007/s11664-009-0816-1 ↗
29. Enhancement of the thermoelectric performance of p-type layered oxide Ca3Co4O9+δ through heavy doping and metallic nanoinclusions10.1002/adma.201004782 ↗
30. Thermoelectric properties of the Bi- Na-substituted Ca3Co4O9 system10.1063/1.1480115 ↗
31. Crystal structure and thermoelectric properties of the misfit-layered cobalt oxides10.1016/j.ssi.2004.01.046 ↗
32. Porous Ca3Co4O9 with enhanced thermoelectric properties derived from sol-gel synthesis10.1016/j.jeurceramsoc.2017.04.059 ↗
33. Modulated structure of thermoelectric compound [Ca2CoO3] CoO210.1143/JPSJ.71.491 ↗
34. Improvement on the high temperature thermoelectric performance of Ga- doped misfit-layered Ca3Co4−xGaxO9+δ (x=0, 0.05, 0.1, and 0.2)10.1016/j.jallcom.2009.11.009 ↗
35. High-temperature transport and thermoelectric properties of Ca3Co4−xTixO910.1016/j.jallcom.2010.04.055 ↗
36. Strongly correlated properties and enhanced thermoelectric response in Ca3Co4−xMxO9 (M = Fe, Mn, and Cu)10.1021/cm902483a ↗
37. Enhancement of the thermoelectric performances of In2O3 by the coupled substitution of M2+/Sn4+ for In3+10.1063/1.2986148 ↗
38. Electronic structure and low temperature thermoelectric properties of In24M8O48 (M=Ge4+, Sn4+,Ti4+, and Zr4+)10.1002/jcc.21947 ↗
39. Tuning the transport and thermoelectric properties of In2O3 build ceramics through doping at In-site10.1063/1.3197064 ↗
40. Oxide-based thermoelectric generator for high-temperature application using p-type Ca3Co4O9 and n-type Ca1.95Sn0.05O3 legs
41. Hall effect measurements on themoelectric Ca3Co4O9: on how to determine the charge carrier concentration in strongly correlated misfit cobaltites10.1063/1.4921861 ↗
42. Phase formation, microstructure development and thermoelectric properties of (ZnO)kIn2O3 ceramics10.1016/j.jeurceramsoc.2017.03.019 ↗
43. Transparent ITO-Mn:ITO thin-film thermocouples10.1109/JSEN.2009.2022556 ↗
44. High-temperature thermoelectric properties of In2O3-based mixed oxides and their applicability to thermoelectric power generation10.1039/jm9940400653 ↗
45. Combined Jonker and Ioffe analysis of oxide conductors and semiconductors10.1111/j.1551-2916.2010.04047.x ↗
46. Janssen · 2004
47. Crystal structure and elementary properties of NaxCoO2 (x = 0.32, 0.51, 0.6, 0.75, and 0.92) in the three-layer NaCoO2 familiy10.1103/PhysRevB.73.174104 ↗
48. Electronic transport properties of [Ca2CoO3−δ]q[Co2] for high thermoelectric performance10.1021/jp409581n ↗
49. Oxygen nonstoichiometry in [Ca2CoO3]0.62[Co2]: a combined experimental and computational study10.1021/jp5048437 ↗
50. Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules10.1039/C5EE02979A ↗
51. Oxide-based thermoelectric power generation module using p-type Ca3Co4O9 and n-type (ZnO)7In2O3 legs10.1016/j.enconman.2010.07.005 ↗
52. Fabrication and thermoelectric power of ∏-shaped Ca3Co4O9/CaMnO3 modules for renewable energy conversion10.1016/j.energy.2013.07.025 ↗
53. High temperature thermoelectric properties and energy transfer devices of Ca3Co4−xAgxO9 and Ca1−ySmyMnO310.1016/j.jallcom.2011.06.113 ↗
54. Power generation of a p-type Ca3Co4O9/n-type CaMnO3 module10.1111/j.1744-7402.2007.02173.x ↗
55. Nanostructured oxide materials and modules for high-temperature power generation from waste heat10.1088/2043-6262/4/2/023002 ↗