Issues associated with modelling of proton exchange membrane fuel cell by computational fluid dynamics
Source abstract
Abstract
The objective of the current study is to highlight possible limitations and difficulties associated with Computational Fluid Dynamics in PEM single fuel cell modelling. It is shown that an appropriate convergence methodology should be applied for steady-state solutions, due to inherent numerical instabilities. A single channel fuel cell model has been taken as numerical example. Results are evaluated for quantitative as well qualitative points of view. The contribution to the polarization curve of the different fuel cell components such as bi-polar plates, gas diffusion layers, catalyst layers and membrane was investigated via their effects on the overpotentials. Furthermore, the potential losses corresponding to reaction kinetics, due to ohmic and mas transport limitations and the effect of the exchange current density and open circuit voltage, were also investigated. It is highlighted that the lack of reliable and robust input data is one of the issues for obtaining accurate results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
2. A mathematical model of the solid-polymer-electrolyte fuel cell10.1149/1.2221251 ↗
3. Phenomenological theory of electro-osmotic effect and water management in polymer electrolyte proton-conducting membranes10.1149/1.1838700 ↗
4. Modeling polymer electrolyte fuel cells: an innovative approach10.1016/S0378-7753(01)00758-3 ↗
5. Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding10.1016/S0378-7753(99)00426-7 ↗
6. A general formulation for a mathematical PEM fuel cell model10.1016/j.jpowsour.2004.09.027 ↗
7. Mathematical modeling of proton exchange membrane fuel cells10.1016/S0378-7753(01)00798-4 ↗
8. 1D and 3D numerical simulations in PEM fuel cells10.1016/j.ijhydene.2011.06.133 ↗
9. Kulikovsky · 2010
10. Heat balance in the catalyst layer and the boundary condition for heat transport equation in a low-temperature fuel cell10.1016/j.jpowsour.2006.08.011 ↗
11. A water and heat management model for proton-exchange-membrane fuel cells10.1149/1.2220792 ↗
12. Modeling the cathode compartment of polymer electrolyte fuel cells: dead and active reaction zones10.1149/1.1392580 ↗
13. A.A. Kulikovsky, J. Divisek, A.A. Kornyshev, Errata: “modeling the cathode compartment of polymer electrolyte fuel cells: dead and active reaction zones”[J. Electrochem. Soc., (146), 3981 (1999)], J. Electrochem. Soc.. 147 (2000) 2419. doi:10.1149/1.1393546.10.1149/1.1393546 ↗
14. An along-the-channel model for proton exchange membrane fuel cells10.1149/1.1838431 ↗
15. Two-dimensional model for proton exchange membrane fuel cells10.1002/aic.690441109 ↗
16. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
17. Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields10.1002/aic.690461016 ↗
18. Two-dimensional simulation of water transport in polymer electrolyte fuel cells10.1016/S0009-2509(00)00066-X ↗
19. Two-dimensional finite-element method study of the resistance of membranes in polymer electrolyte fuel cells10.1016/S0013-4686(99)00394-1 ↗
20. Two-dimensional modeling of a polymer electrolyte membrane fuel cell with long flow channel. Part I. Model development10.1016/j.jpowsour.2014.11.058 ↗
21. Two-dimensional modeling of a polymer electrolyte membrane fuel cell with long flow channel. Part II. Physics-based electrochemical impedance analysis10.1016/j.jpowsour.2014.12.045 ↗
22. A computationally efficient steady-state electrode-level and 1D+1D cell-level fuel cell model10.1016/j.jpowsour.2012.03.023 ↗
23. Computational fluid dynamics modeling of proton exchange membrane fuel cells10.1149/1.1394090 ↗
24. Numerical prediction of mass-exchange between cathode and anode channels in a {PEM} fuel cell10.1016/S0017-9310(00)00257-X ↗
25. Three-dimensional numerical simulation of straight channel PEM fuel cells10.1023/A:1003964201327 ↗
26. Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells10.1016/j.jpowsour.2003.07.007 ↗
27. Chemical reacting transport phenomena in a PEM fuel cell10.1016/S0017-9310(03)00253-9 ↗
28. A single-phase, non-isothermal model for PEM fuel cells10.1016/j.ijheatmasstransfer.2004.10.004 ↗
29. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell10.1016/S0378-7753(01)01057-6 ↗
30. A 3D, multiphase, multicomponent model of the cathode and anode of a PEM fuel cell10.1149/1.1621412 ↗
31. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell—a parametric study10.1016/S0378-7753(03)00816-4 ↗
32. Water balance simulations of a polymer-electrolyte membrane fuel cell using a two-fluid model10.1016/j.jpowsour.2011.03.068 ↗
33. Computational model of a PEM fuel cell with serpentine gas flow channels10.1016/j.jpowsour.2003.12.027 ↗
34. CFD-based modelling of proton exchange membrane fuel cells10.1016/j.jpowsour.2004.08.054 ↗
35. A theoretical simulation of a PEM fuel cell with 4-serpentine flow channel
36. Multi-gas transportation and electrochemical performance of a polymer electrolyte fuel cell with complex flow channels10.1016/S0378-7753(02)00723-1 ↗
37. Analytical modeling of PEM fuel cell i–V curve10.1016/j.renene.2010.07.007 ↗
38. Analytical approach to polymer electrolyte membrane fuel cell performance and optimization10.1016/j.jelechem.2007.02.028 ↗
39. State of understanding of Nafion10.1021/cr0207123 ↗
40. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
41. PEM fuel cells: a mathematical overview10.1137/080720802 ↗
42. Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells10.1016/j.energy.2008.04.015 ↗
43. Computational modelling of polymer electrolyte membrane (PEM) fuel cells: challenges and opportunities10.1016/j.energy.2006.08.007 ↗
44. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
45. Modeling transport in polymer-electrolyte fuel cells10.1021/cr020729l ↗
46. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
47. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
48. Numerical studies of cold-start phenomena in PEM fuel cells: a review10.1002/er.1730 ↗
49. Computational design and optimization of fuel cells and fuel cell systems: a review10.1016/j.jpowsour.2010.12.011 ↗
50. Segmented polymer electrolyte membrane fuel cells—a review10.1016/j.rser.2010.08.024 ↗
51. Bird · 1960
52. Bear · 1972
53. Dullien · 1992
54. Modeling gas-phase transport in polymer-electrolyte fuel cells
55. Modeling gas-phase flow in porous media10.1016/j.icheatmasstransfer.2004.08.026 ↗
56. A modified Maxwell-Stefan model for transport through inert membranes: the binary friction model10.1016/S0923-0467(96)03134-X ↗
57. A generalized mathematical model to study gas transport in PEMFC porous media10.1016/j.ijheatmasstransfer.2012.11.023 ↗
58. Newman · 2004
59. Ionomer self-assembly in dilute solution studied by coarse-grained molecular dynamics10.1021/acs.macromol.5b02158 ↗
60. Absorption, desorption, and transport of water in polymer electrolyte membranes for fuel cells10.1149/1.1899263 ↗
61. Water sorption, desorption and transport in Nafion membranes10.1016/j.memsci.2007.06.022 ↗
62. Water-sorption and transport properties of Nafion 117 H10.1002/app.1993.070500816 ↗
63. Kusoglu · 2012 · 175
64. Subsecond morphological changes in Nafion during water uptake detected by small-angle X-ray scattering10.1021/mz200015c ↗
65. Diffusion of water in Nafion using time-resolved fourier transform infrared−attenuated total reflectance spectroscopy10.1021/jp811325v ↗
66. Non-Fickian diffusion of water in Nafion10.1021/ma100047z ↗
67. Solubility and transport behavior of water and alcohols in Nafion™10.1016/S0032-3861(00)00350-5 ↗
68. Water transport properties of Nafion membranes10.1016/S0376-7388(03)00256-4 ↗
69. Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes10.1021/j100168a060 ↗
70. Diffusion and interfacial transport of water in Nafion10.1021/jp1112125 ↗
71. Poroelectroelastic theory of water sorption and swelling in polymer electrolyte membranes10.1039/c1sm05273j ↗
72. Water in polymer electrolyte fuel cells: friend or foe?10.1063/1.2387087 ↗
73. On the modeling of water transport in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.070 ↗
74. Water management in PEM fuel cells10.1149/1.1641033 ↗
75. Vetter · 1967
76. Rigorous 3-D mathematical modeling of PEM fuel cells10.1149/1.1615608 ↗
77. Reaction pathways and poisons—II10.1016/0013-4686(75)85048-1 ↗
78. Study of the exchange current density for the hydrogen oxidation and evolution reactions10.1149/1.2733987 ↗
79. Dual-pathway kinetic equation for the hydrogen oxidation reaction on Pt electrodes10.1149/1.2218756 ↗
80. Electrode kinetics of oxygen reduction at carbon-supported and unsupported platinum microcrystallite/Nafion® interfaces10.1016/0022-0728(92)80447-C ↗
81. A microelectrode study of oxygen reduction at the platinum/recast-Nafion film interface10.1149/1.2069299 ↗
82. Determination of catalyst unique parameters for the oxygen reduction reaction in a PEMFC10.1149/1.2266294 ↗
83. Cathode catalyst utilization for the ORR in a PEMFC10.1149/1.2400626 ↗
84. Double-trap kinetic equation for the oxygen reduction reaction on Pt(111) in acidic media10.1021/jp076104e ↗
85. Chapter two macroscopic modeling of polymer-electrolyte membranes10.1016/S1752-301X(07)80007-X ↗
86. Transport in polymer-electrolyte membranes10.1149/1.1639157 ↗
87. Pt-oxide coverage-dependent oxygen reduction reaction (ORR) kinetics10.1149/2.088205jes ↗
88. Understanding the effect of kinetic and mass transport processes in cathode agglomerates10.1149/2.010408jes ↗
89. Investigation of the ORR using the double-trap intrinsic kinetic model10.1149/2.123306jes ↗
90. Rigorous 3-D mathematical modeling of PEM fuel cells: I. Model predictions without liquid water transport10.1149/1.1615608 ↗
91. Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell10.1016/j.jpowsour.2009.06.077 ↗
92. Through-plane thermal conductivity of PEMFC porous transport layers10.1115/1.4002403 ↗
93. Multiphase flow and heat transfer in porous media10.1016/S0065-2717(08)70251-X ↗
94. A multiphase mixture model for multiphase, multicomponent transport in capillary porous media—I. Model development10.1016/0017-9310(96)00036-1 ↗
95. The effects of water and microstructure on the performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2006.02.085 ↗
96. Three-dimensional CFD modelling of PEM fuel cells: an investigation into the effects of water flooding10.1016/j.ces.2009.01.060 ↗
97. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium10.1016/S0017-9310(03)00305-3 ↗
98. 3D simulations of the impact of two-phase flow on PEM fuel cell performance10.1016/j.ces.2012.11.007 ↗
99. Fundamental understanding of liquid water effects on the performance of a {PEMFC} with serpentine-parallel channels10.1016/j.electacta.2008.10.029 ↗
100. Modeling, simulation and experimental validation of a PEM fuel cell system10.1016/j.compchemeng.2011.03.013 ↗