journal article·2016-08

Understanding the interfacial phenomena of a 4.7 V and 55 °C Li-ion battery with Li-rich layered oxide cathode and graphite anode and its correlation to high-energy cycling performance

Hieu Quang Pham, Eui-Hyung Hwang, Young-Gil Kwon, Seung-Wan Song

Publisher page

Abstract

Abstract Research progress of high-energy performance and interfacial phenomena of Li 1.13 Mn 0.463 Ni 0.203 Co 0.203 O 2 cathode and graphite anode in a 55 °C full-cell under an aggressive charge cut-off voltage to 4.7 V (4.75 V vs. Li/Li + ) is reported. Although anodic instability of conventional electrolyte is the critical issue on high-voltage and high-temperature cell operation, interfacial phenomena and the solution to performance improvement have not been reported. Surface spectroscopic evidence revealed that structural degradation of both cathode and anode materials, instability of surface film at cathode, and metal-dissolution from cathode and -deposition at anode, and a rise of interfacial resistance with high-voltage cycling in 55 °C conventional electrolyte are resolved by the formation of a stable surface film with organic/inorganic mixtures at cathode and solid electrolyte interphase (SEI) at anode using blended additives of fluorinated linear carbonate and vinylene carbonate. As a result, significantly improved cycling stability of 77% capacity retention delivering 227−174 mAhg −1 after 50 cycles is obtained, corresponding to 819−609 Wh per kg of cathode active material. Interfacial stabilization approach would pave the way of controlling the performance and safety, and widening the practical application of Li-rich layered oxide cathode materials and high-voltage electrolyte materials in various high-energy density Li-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Comments on the structural complexity of lithium-rich Li1+xM1−xO2 electrodes (M = Mn, Ni, Co) for lithium batteries10.1016/j.elecom.2006.06.030 ↗
2. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
3. Performance enhancement of 4.8 V Li1.2Mn0.525Ni0.175Co0.1O2 battery cathode using fluorinated linear carbonate as a high-voltage additive10.1149/2.1141412jes ↗
4. H. Q. Pham, E. H. Hwang, Y. G. Kwon, S. W. Song, Enabling high-energy battery performance of 4.8V Li-rich layered oxide cathode with a high-voltage additive, Abstract # 275, The 227th Meeting of the Electrochemical Society, Chicago, May 25, 2015.10.1149/MA2015-01/2/275 ↗
5. The role of AlF3 coatings in improving electrochemical cycling of Li-enriched nickel-manganese oxide electrodes for Li-ion batteries10.1002/adma.201104106 ↗
6. A new spinel-layered Li-rich microsphere as a high-rate cathode material for Li-ion batteries10.1002/aenm.201400062 ↗
7. Enhanced cycling stability of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by surface modification of MgO with melting impregnation method10.1016/j.electacta.2012.10.111 ↗
8. Studies of Li and Mn-rich Lix[MnNiCo]O2 electrodes: electrochemical performance, structure, and the effect of the aluminum fluoride coating10.1149/2.091311jes ↗
9. Phosphorus derivatives as electrolyte additives for lithium-ion battery: the removal of O2 generated from lithium-rich layered oxide cathode10.1016/j.jpowsour.2013.06.091 ↗
10. Tunable and robust phosphite-derived surface film to protect lithium-rich cathodes in lithium-ion batteries10.1021/acsami.5b01770 ↗
11. Tris(hexafluoro-iso-propyl)phosphate as an SEI-forming additive on improving the electrochemical performance of the Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode material10.1149/2.066302jes ↗
12. Electrolyte additive combinations that enhance performance of high-capacity Li1.2Ni0.15Mn0.55Co0.1O2–graphite cells10.1016/j.electacta.2013.03.102 ↗
13. Mitigating performance degradation of high-capacity lithium-ion cells with boronate-based electrolyte additives10.1149/2.0081410jes ↗
14. Substituted dioxaphosphinane as an electrolyte additive for high voltage lithium-ion cells with overlithiated layered oxide10.1149/2.100404jes ↗
15. 1,3,5-trihydroxybenzene as a film-forming additive for high-voltage positive electrode10.1016/j.elecom.2012.10.029 ↗
16. A novel surface treatment method and new insight into discharge voltage deterioration for high-performance 0.4Li2MnO3–0.6LiNi1/3Co1/3Mn1/3O2 cathode materials10.1002/aenm.201400631 ↗
17. Structural evolution of layered Li1.2Ni0.2Mn0.6O2 upon electrochemical cycling in a Li rechargeable battery10.1039/c0jm01971b ↗
18. Atomic structure of a Lithium-rich layered oxide material for Lithium-ion batteries: evidence of a solid solution10.1021/cm200831c ↗
19. Mitigation of layered to spinel conversion of a Li-rich layered metal oxide cathode material for li-ion batteries10.1149/2.040403jes ↗
20. A Li-rich layered cathode material with enhanced structural stability and rate capability for Li-on batteries10.1149/2.070403jes ↗
21. Structural analysis of Li2MnO3 and related Li-Mn-O materials batteries and energy storage10.1149/1.3609849 ↗
22. Sol–gel growth of LiCoO2 films on Si substrates by a spin-coating method10.1016/S0022-0248(01)01973-X ↗
23. Microprobe study of the effect of Li intercalation on the structure of graphite10.1016/S0378-7753(03)00287-8 ↗
24. Capacity fading of lithiated graphite electrodes studied by a combination of electroanalytical methods, Raman spectroscopy and SEM10.1016/j.jpowsour.2005.03.107 ↗
25. Perfluoroalkyl-substituted ethylene carbonates: novel electrolyte additives for high-voltage lithium-ion batteries10.1016/j.jpowsour.2013.07.070 ↗
26. Raman spectroscopy of carbon materials: structural basis of observed spectra10.1021/cm00011a018 ↗
27. Enhanced capacitance of manganese oxide via confinement inside carbon nanotubes10.1039/c000517g ↗
28. Graphene-NiO nanohybrid prepared by dry plasma reduction as a low-cost counter electrode material for dye-sensitized solar cells10.1039/C3NR04871C ↗
29. Understanding long-term cycling performance of Li1.2Ni0.15Mn0.55Co0.1O2–Graphite lithium-ion cells10.1149/2.002305jes ↗
30. Socrates · 1994
31. Surface film formation on LiNi0.8Co0.15Al0.05 O 2 cathodes using attenuated total reflection IR spectroscopy10.1149/1.1763771 ↗
32. Impacts of surface Mn valence on cycling performance and surface chemistry of Li- and Al-substituted spinel battery cathodes10.1149/1.3556638 ↗
33. Interfacial origin of performance improvement and fade for 4.6 V LiNi0.5Co0.2Mn0.3O2 battery cathodes10.1021/jp501670g ↗
34. Analysis of vinylene carbonate derived SEI layers on graphite anode10.1149/1.1785795 ↗
35. Matrix-isolation study of the reaction of atomic and molecular fluorine with carbon atoms. The infrared spectra of normal and 13C-Substituted CF2 and CF310.1063/1.1669423 ↗
36. Wagner · 1979
37. NIST X-ray photoelectron spectroscopy database, http://srdata.nist.gov/xps/VC 2003 Copyright, Last Accessed., 2015.
38. Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cells10.1016/0167-2738(94)90450-2 ↗
39. Dissolution of spinel oxides and capacity losses in 4 V Li/LixMn2 O 4 cells10.1149/1.1836981 ↗
40. Layered Li1 + x ( Ni0.425Mn0.425Co0.15 )1 − xO2 positive electrode materials for lithium-ion batteries10.1149/1.2138573 ↗
41. Surface chemistry of metal oxide coated lithium manganese nickel oxide thin film cathodes studied by XPS10.1016/j.electacta.2012.11.120 ↗
42. XPS studies of surface chemistry changes of LiNi0.5Mn0.5O2 electrodes during high-voltage cycling10.1149/2.069304jes ↗
43. Improved electrochemical properties of Li[Li0.2Ni0.17Mn0.56Co0.07]O2 cathode material via micro-structural rearrangement10.1039/c3ra41653d ↗
44. Probing the origin of enhanced stability of AlPO4 nanoparticle coated LiCoO2 during cycling to high voltages: combined XRD and XPS studies10.1021/cm900862v ↗
45. Comparing anode and cathode electrode/electrolyte interface composition and morphology using soft and hard X-ray photoelectron spectroscopy10.1016/j.electacta.2013.03.010 ↗
46. Computation of thermodynamic oxidation potentials of organic solvents using density functional theory10.1149/1.1362546 ↗
47. The effect of vinylene carbonate additive on surface film formation on both electrodes in Li-ion batteries10.1149/1.3029674 ↗
48. Theoretical studies to understand surface chemistry on carbon anodes for lithium-ion batteries: How does vinylene carbonate play its role as an electrolyte additive?10.1021/ja017073i ↗
49. Impact of 2-Vinylpyridine as electrolyte additive on surface and electrochemistry of graphite for C ∕ LiMn2O4 Li-ion cells10.1149/1.1885385 ↗
50. Surface characterization of electrodes from high power lithium-ion batteries10.1149/1.1505636 ↗