Microscale X-ray tomographic investigation of the interfacial morphology between the catalyst and micro porous layers in proton exchange membrane fuel cells
Source abstract
Abstract
Abstract The interfacial morphology between the catalyst layer (CL) and micro porous layer (MPL) influences the performance of proton exchange membrane fuel cells (PEMFCs). Here we report a direct method to investigate the CL-MPL interfacial morphology of stacked and compressed gas diffusion layer (GDL with MPL)-catalyst coated membrane (CCM) assemblies. The area, origin and dimensions of interfacial gaps are studied with high-resolution X-ray micro computed tomography (X-μCT). The projected gap area (fraction of the CL-MPL interface separated by gaps) is higher for GDL-CCM assemblies with large differences in the surface roughness between CL and MPL but reduces with increasing compression and similarity in roughness. Relatively large continuous gaps are found in proximity to cracks in the MPL. These are hypothesized to form due to the presence of large pores on the surface of the GDL. Smaller gaps are induced by the surface roughness features throughout the CL-MPL interface. By modification of the pore sizes on the GDL surface serving as substrate for the MPL, the number and dimension of MPL crack induced gaps can be manipulated. Moreover, adjusting the CL and MPL surface roughness parameters to achieve similar orders of roughness can improve the surface mating characteristics of these two components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
2. Hubert, handbook of fuel cells - fundamentals
3. Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell10.1016/j.jpowsour.2009.06.077 ↗
4. Experimental investigation of the role of a microporous layer on the water transport and performance of a PEM fuel cell10.1016/j.jpowsour.2007.04.016 ↗
5. Diffusion media materials and characterisation
6. Review and analysis of PEM fuel cell design and manufacturing10.1016/S0378-7753(02)00542-6 ↗
7. X-ray tomographic analysis of porosity distributions in gas diffusion layers of proton exchange membrane fuel cells10.1016/j.electacta.2014.11.143 ↗
8. On the role of the microporous layer in PEMFC operation10.1016/j.elecom.2008.12.053 ↗
9. A study of water transport as a function of the micro-porous layer arrangement in PEMFCs10.1016/j.ijhydene.2010.05.123 ↗
10. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
11. Effect of water sorption on the electronic conductivity of porous polymer electrolyte membrane fuel cell catalyst layers10.1021/am503509j ↗
12. Morphological features (defects) in fuel cell membrane electrode assemblies10.1016/j.jpowsour.2005.12.027 ↗
13. An overview of cracks and interfacial voids in membrane electrode assemblies in polymer electrolyte fuel cells
14. Investigation of the impact of interfacial delamination on polymer electrolyte fuel cell performance10.1149/1.3006398 ↗
15. A computational model for assessing impact of interfacial morphology on polymer electrolyte fuel cell performance10.1016/j.jpowsour.2009.12.121 ↗
16. Model to investigate interfacial morphology effects on polymer electrolyte fuel cell performance10.1149/1.3210554 ↗
17. Characterization of interfacial structure in PEFCs: water storage and contact resistance model10.1149/1.3247585 ↗
18. Effects of surface irregularities and interfacial cracks on polymer electrolyte fuel cell performance
19. Interfacial morphology and contact resistance model for polymer electrolyte fuel cells10.1149/1.3210555 ↗
20. A two-phase model for studying the role of microporous layer and catalyst layer interface on polymer electrolyte fuel cell performance10.1016/j.ijhydene.2013.05.079 ↗
21. Investigation of freeze/thaw durability in polymer electrolyte fuel cells10.1016/j.ijhydene.2010.04.079 ↗
22. Characterization of interfacial morphology in polymer electrolyte fuel cells: micro-porous layer and catalyst layer surfaces10.1016/j.jpowsour.2009.11.032 ↗
23. Deterministic contact mechanics model applied to electrode interfaces in polymer electrolyte fuel cells and interfacial water accumulation10.1016/j.jpowsour.2013.03.165 ↗
24. Microscale tomography investigations of heterogeneous porosity distributions of PEMFC GDLs10.1149/1.3481443 ↗
25. Investigation of gas diffusion layer properties using x-ray microtomography
26. Resolving macro- and micro-porous layer interaction in polymer electrolyte fuel cells using focused ion beam and X-ray computed tomography10.1016/j.electacta.2012.09.008 ↗
27. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs. II. Effect of MPL cracks10.1149/1.3594636 ↗
28. Different methods for determining porosity of gas diffusion layer using X-ray microtomography10.1016/j.electacta.2015.10.083 ↗
29. Nano-morphology of a polymer electrolyte fuel cell catalyst layer-imaging, reconstruction and analysis10.1007/s12274-011-0141-x ↗
30. Catalyst layer analysis: nanoscale X-ray CT, spatially-resolved in-situ microscale diagnostics and modelling10.1149/1.3635575 ↗
31. X-ray computed tomography reconstruction and analysis of polymer electrolyte membrane fuel cell porous transport layers10.1016/j.ijhydene.2012.08.077 ↗
32. Morphology studies on high-temperature polymer electrolyte membrane fuel cell electrodes10.1016/j.jpowsour.2014.01.032 ↗
33. Combining structural and electrochemical analysis of electrodes using micro-computed tomography and a microfluidic fuel cell10.1149/2.033203jes ↗
34. Simultaneous measurement of the effective ionic conductivity and effective electronic conductivity in a porous electrode film impregnated with electrolyte10.1016/j.jelechem.2010.08.010 ↗
35. Quantifying electronic and ionic conductivity contributions in carbon/polyelectrolyte composite thin films10.1149/2.0621414jes ↗
36. Analysis of water adsorption and condensation in catalyst layers for polymer electrolyte fuel cells10.1016/j.electacta.2014.07.058 ↗
37. PEMFC electrode preparation: influence of the solvent composition and evaporation rate on the catalytic layer microstructure10.1016/j.jpowsour.2005.02.048 ↗
38. Composition dependence of the pore structure and water transport of composite catalyst layers for polymer electrolyte fuel cells10.1149/2.055309jes ↗
39. Properties of catalyst layers for PEMFC electrodes prepared by electrospray deposition10.1149/1.3425740 ↗
40. Influence of the ionomer/carbon ratio for low-Pt loading catalyst layer prepared by reactive spray deposition technology10.1016/j.jpowsour.2015.02.101 ↗
41. Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method10.1016/j.ijhydene.2010.06.044 ↗
42. Thin-film catalyst layers for polymer electrolyte fuel cell electrodes10.1007/BF01093004 ↗
43. Optimal catalyst layer structure of polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2011.05.073 ↗
44. Direct measurement of through-plane thermal conductivity of partially saturated fuel cell diffusion media10.1016/j.jpowsour.2014.01.015 ↗
45. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
46. ImageJ - Image processing and analysis in Java, (n.d.). http://imagej.nih.gov/ij/.
47. Influence of threshold variation on determining the properties of a polymer electrolyte fuel cell gas diffusion layer in X-ray nano-tomography10.1016/j.ces.2009.12.019 ↗
48. A comparison of micro CT with other techniques used in the characterization of scaffolds10.1016/j.biomaterials.2005.08.035 ↗
49. Polymer/surfactant interactions at the air/water interface10.1016/j.cis.2007.01.002 ↗
50. Crack generation in catalyst layer and micro porous layer by wet-dry cycles and its impact on PEMFC performance
51. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
52. Modeling the liquid water transport in the gas diffusion layer for polymer electrolyte membrane fuel cells using a water path network10.3390/en6094508 ↗
53. Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks10.1016/j.renene.2012.04.011 ↗
54. Characterisation of mechanical behaviour and coupled electrical properties of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.jpowsour.2008.09.026 ↗
55. Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging10.1016/j.jpowsour.2013.12.062 ↗