journal article·2008-05

Development of a PEM stack and performance analysis including the effects of water content in the membrane and cooling method

Yong Hun Park, Jerald A. Caton

Journal of Power Sources· Volume 179· Issue 2
Publisher page

Abstract

Abstract For the use of proton exchange membrane (PEM) fuel cell systems to become widespread, the components required to build one should be minimized. Because a PEM fuel cell has a limited operating temperature range, it requires some kind of cooling method. In this study, different cooling methods were investigated experimentally. A PEM fuel cell stack with an active area of 100 cm 2 and 8 cells in series was developed and used in this research. When 50% relative humidity inlet gases were supplied (at 15 A of current discharge and 70 °C), cell temperatures at the center increased from around 60 °C to 85 °C, and cell voltage dropped from 4.8 V to 3.2 V because of membrane drying (insufficient cooling). When fully hydrated inlet gases (100% relative humidity) were supplied to the PEM stack at the same test conditions, the cell temperature remained around 65 °C, and stack voltage remained around 5.7 V at 15 A of current discharge. Fully hydrated inlet gases play a positive role both for water transport (when the proton moves from the anode to the cathode) and to maintain the fuel cell stack temperature to prevent stack drying.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Scholta · J. Power Sources · 2006 · 155 · 6010.1016/j.jpowsour.2005.05.101 ↗
2. Hwang · J. Power Sources · 2002 · 104 · 2410.1016/S0378-7753(01)00865-5 ↗
3. Y.H. Park, J.A. Caton, J. Fuel Cell Sci. Technol., Paper No: FC-07-1114, in press.
4. Qi · J. Power Sources · 2002 · 109 · 46910.1016/S0378-7753(02)00111-8 ↗
5. Rodatz · J. Power Sources · 2004 · 128 · 20810.1016/j.jpowsour.2003.09.060 ↗
6. Eckl · J. Power Sources · 2004 · 138 · 13710.1016/j.jpowsour.2004.06.042 ↗