Ultra-stable lithium plating/stripping in garnet-based lithium-metal batteries enabled by a SnO2 nanolayer
Source abstract
Abstract
Abstract Owing to its high ionic conductivity (10−4 - 10−3 S cm−1), excellent stability toward lithium and a wide electrochemical window, the garnet-type solid-state electrolyte has been regarded as one of the most promising solutions to the viability of lithium metal-based batteries. However, the poor interfacial contact between the garnet and the lithium metal leads to an ultrahigh interfacial resistance (∼1000 Ω cm2) and uneven current distribution. In this work, the issue is effectively addressed by coating the garnet pellet with a SnO2 nanolayer. Attributed to the lithiation reaction between the lithium metal and SnO2, an ion-conducting interlayer is generated automatically between the garnet and lithium metal, which reduces their interfacial resistance from 1019 to 153 Ω cm2. A Li | SnO2-garnet | Li symmetric cell is then built and achieves a stable lithium plating/stripping for more than 900 h at 0.2 mA cm−2 without short circuit. Moreover, in a Li | SnO2-garnet | LiFePO4 full battery test, the SnO2 nanolayer enables the full battery to be stably operated for over 100 cycles at 0.3 C with a capacity retention of 98.6%, whereas the control group using bare garnet is unable to work at this high rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Iron fluoride–carbon nanocomposite nanofibers as free-standing cathodes for high-energy lithium batteries10.1002/adfm.201801711 ↗
2. CoO nanofiber decorated nickel foams as lithium dendrite suppressing host skeletons for high energy lithium metal batteries10.1016/j.ensm.2018.05.017 ↗
3. Heterogeneous/homogeneous mediators for high-energy-density lithium–sulfur batteries: progress and prospects10.1002/adfm.201870269 ↗
4. Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density10.1007/s10008-017-3610-7 ↗
5. A high energy lithium-sulfur battery with ultrahigh-loading lithium polysulfide cathode and its failure mechanism10.1002/aenm.201502459 ↗
6. Mesoporous ultrafine Ta2O5nanoparticle with abundant oxygen vacancies as a novel and efficient catalyst for non-aqueous Li-O2batteries10.1016/j.electacta.2018.03.164 ↗
7. Borophene and defective borophene as potential anchoring materials for lithium-sulfur batteries: a first-principles study10.1039/C7TA09244J ↗
8. A novel energy storage system incorporating electrically rechargeable liquid fuels as the storage medium10.1016/j.scib.2019.01.014 ↗
9. New approach to design solid block copolymer electrolytes for 40 °C lithium metal battery operation10.1016/j.electacta.2017.03.221 ↗
10. An artificial solid electrolyte interphase layer for stable lithium metal anodes10.1002/adma.201504526 ↗
11. Poly(dimethylsiloxane) thin film as a stable interfacial layer for high-performance lithium-metal battery anodes
12. Beyond lithium ion batteries: higher energy density battery systems based on lithium metal anodes10.1016/j.ensm.2017.12.002 ↗
13. Solid-liquid electrolyte as a nanoion modulator for dendrite-free lithium anodes10.1021/acsami.8b03391 ↗
14. Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteries10.1039/C6TA07384K ↗
15. Challenges and issues facing lithium metal for solid-state rechargeable batteries10.1016/j.jpowsour.2017.04.018 ↗
16. Perspectives for restraining harsh lithium dendrite growth: towards robust lithium metal anodes10.1016/j.ensm.2018.03.024 ↗
17. Long lifespan lithium metal anodes enabled by Al2O3 sputter coating10.1016/j.ensm.2017.08.001 ↗
18. Dendrite-Free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte10.1002/adma.201604460 ↗
19. Oxygen and nitrogen co-doped porous carbon granules enabling dendrite- free lithium metal anode10.1016/j.ensm.2018.08.018 ↗
20. Developing high-performance lithium metal anode in liquid electrolytes: challenges and progress
21. Negating interfacial impedance in garnet-based solid-state Li metal batteries10.1038/nmat4821 ↗
22. The interfacial evolution between polycarbonate-based polymer electrolyte and Li-metal anode10.1016/j.jpowsour.2018.07.008 ↗
23. Germanium thin film protected lithium aluminum germanium phosphate for solid-state Li batteries10.1002/aenm.201702374 ↗
24. Recent progress of the solid-state electrolytes for high-energy metal-based batteries10.1002/aenm.201702657 ↗
25. Progress in solid electrolytes toward realizing solid-state lithium batteries10.1016/j.jpowsour.2018.05.003 ↗
26. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries10.1021/jacs.8b03106 ↗
27. All solid-state battery based on ceramic oxide electrolytes with perovskite and NASICON structure10.1007/s10008-018-3943-x ↗
28. Li6.75La3Zr1.75Ta0.25O12@amorphous Li3OCl composite electrolyte for solid state lithium-metal batteries10.1016/j.ensm.2018.02.015 ↗
29. Prescribing functional additives for treating the poor performances of high-voltage (5 V-class) LiNi0.5Mn1.5O4/MCMB Li-ion batteries
30. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
31. Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries10.1039/C8TA02276C ↗
32. Highly stable garnet solid electrolyte based Li-S battery with modified anodic and cathodic interfaces10.1016/j.ensm.2018.05.018 ↗
33. Solid-state lithium battery chemistries achieving high cycle performance at room temperature by a new garnet-based composite electrolyte10.1016/j.jpowsour.2018.05.028 ↗
34. Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.019 ↗
35. Stability of garnet-type Li ion conductors: an overview10.1016/j.ssi.2017.09.018 ↗
36. Li3N-Modified garnet electrolyte for all-solid-state lithium metal batteries operated at 40 °C10.1021/acs.nanolett.8b03902 ↗
37. The importance of the substrate in assays of acid phosphatase in serum10.1093/ajcp/32.1_ts.83 ↗
38. Enabling room-temperature solid-state lithium-metal batteries with fluoroethylene carbonate-modified plastic crystal interlayers
39. Electrochemical performance of an all-solid-state lithium ion battery with garnet-type oxide electrolyte10.1016/j.jpowsour.2011.10.064 ↗
40. Toward garnet electrolyte–based Li metal batteries: an ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface10.1126/sciadv.1601659 ↗
41. Drawing a soft interface: an effective interfacial modification strategy for garnet-type solid-state Li batteries10.1021/acsenergylett.8b00453 ↗
42. Hybrid polymer/garnet electrolyte with a small interfacial resistance for lithium-ion batteries10.1002/anie.201608924 ↗
43. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries10.1039/C8EE00540K ↗
44. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
45. Interface engineering for garnet-based solid-state lithium-metal batteries: materials, structures, and characterization
46. Mechanism of lithium metal penetration through inorganic solid electrolytes10.1002/aenm.201701003 ↗
47. Nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes10.1021/acs.nanolett.6b04695 ↗
48. Luo · 2017 · 1
49. Wang · 2018 · 1
50. Garnet solid electrolyte protected Li-metal batteries10.1021/acsami.7b03887 ↗
51. Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte10.1021/jacs.6b05341 ↗
52. Electrochemistry Communications in lithium – hydrogen peroxide semi-fuel cell10.1016/j.elecom.2014.09.006 ↗
53. Sintering behavior of garnet-type Li6.4La3Zr1.4Ta0.6O12 in Li2CO3 atmosphere and its electrochemical property10.1111/ijac.12735 ↗
54. Al-doped Li7La3Zr2O12 synthesized by a polymerized complex method10.1016/j.jpowsour.2011.05.065 ↗
55. Enabling room-temperature solid-state lithium-metal batteries with fl uoroethylene carbonate-modi fi
56. Janani · 2015 · vol 2046 · 2039
57. Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte10.1021/jacs.6b06777 ↗
58. Toward garnet electrolyte–based Li metal batteries: an ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface10.1126/sciadv.1601659 ↗
59. Yang · 2011 · 1874
60. A highly-safe lithium-ion sulfur polymer battery with SnO2 anode and acrylate-based gel polymer electrolyte10.1016/j.nanoen.2016.08.033 ↗
61. Analysis of the Li KLL auger transition on freshly exposed lithium and lithium surface oxide by
62. Electrochemistry Communications Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte10.1016/j.elecom.2015.05.001 ↗
63. Cheng · 2015