Facile fabrication of ultrathin hybrid membrane for highly flexible supercapacitors via in-situ phase separation of polyethersulfone
Source abstract
Abstract
Abstract In this article, a facile method based on in-situ phase-separation was developed for the fabrication of ultrathin hybrid membranes for highly flexible supercapacitors. The structures and morphologies of the prepared electrodes were characterized by scanning electron microscopy (SEM), Fourier-transformed infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) measurements; and the electrochemical behaviors were examined in 2 M KOH solution. SEM and FTIR characterizations reveal that activated carbon was imbedded into the polymer membrane of polyethersulfone to form a uniform and flexible hybrid membrane. When the thin polymer-carbon membrane (PCM) was used as an electrode material for supercapacitor, a high specific capacitance of 169.4 Fg −1 was obtained at a current density of 0.5 Ag −1 along with good long-term cycle life of 94.6% capacity retention after 2000 charging-discharging cycles. Benefiting from these merits, the as-fabricated PCM//PCM cell shows an excellent electrochemical property. These results suggest a promising route towards the fabrication of highly flexible electrodes for high-performance supercapacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Energy and sustainability10.1126/science.1139792 ↗
2. The global energy landscape and materials innovation10.1557/mrs2008.61 ↗
3. Energy storage technologies in renewable energy electricity generation system
4. Hopf bifurcation and eigenvalue sensitivity analysis of doubly fed induction generator wind turbine system
5. Conway · 1999
6. Materials for electrochemical capacitors10.1038/nmat2297 ↗
7. Materials science: electrochemical capacitors for energy management
8. Nitrogen-containing micro-porous carbon nanospheres with improved capacitive properties10.1039/C0EE00277A ↗
9. Carbon materials for chemical capacitive energy storage10.1002/adma.201100984 ↗
10. Ultracapacitors: why, how, and where is the technology10.1016/S0378-7753(00)00485-7 ↗
11. Carbon-based materials as supercapacitor electrodes10.1039/b813846j ↗
12. Nanostructured carbon-based electrodes: bridging the gap between thin-film lithium-ion batteries and electrochemical capacitors10.1039/c0ee00642d ↗
13. High electroactivity of polyaniline in supercapacitors by using a hierarchically porous carbon monolith as a support10.1002/adfm.200700518 ↗
14. Electrochemical storage of energy in carbon nanotubes and nanostructured carbons10.1016/S0008-6223(02)00045-3 ↗
15. Manganese oxide-based materials as electrochemical supercapacitor electrodes10.1039/C0CS00127A ↗
16. Easy fabrication and high electrochemical capacitive performance of hierarchical porous carbon by a method combining liquid-liquid phase separation and pyrolysis process10.1016/j.electacta.2014.06.118 ↗
17. 3D aperiodic hierarchical porous graphitic carbon material for high-rate electrochemical capacitive energy storage10.1002/anie.200702721 ↗
18. Electrochemical performance of carbon onions, nanodiamonds, carbon black and multiwalled nanotubes in electrical double layer capacitors10.1016/j.carbon.2007.08.024 ↗
19. Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon10.1038/nnano.2010.162 ↗
20. Carbon nanomaterials for advanced energy conversion and storage10.1002/smll.201101594 ↗
21. Preparation of tunable 3D pillared carbon nanotube-graphene networks for high-performance capacitance10.1021/cm2021214 ↗
22. Graphene for energy conversion and storage in fuel cells and supercapacitors10.1016/j.nanoen.2012.05.001 ↗
23. Materials science. Flexible electronics10.1126/science.1171230 ↗
24. A review of fabrication and applications of carbon nanotube film-based flexible electronics10.1039/c3nr33560g ↗
25. Low-Power flexible organic light-emitting diode display device10.1002/adma.201101066 ↗
26. Bendable inorganic thin-film battery for fully flexible electronic systems10.1021/nl302254v ↗
27. Flexible supercapacitors10.1016/j.partic.2012.12.004 ↗
28. Cellulose nanofibril/reduced graphene oxide/carbon nanotube hybrid aerogels for highly flexible and all-solid-state supercapacitors10.1021/am507999s ↗
29. Carbon nanomaterials for flexible energy storage10.1080/21663831.2013.808712 ↗
30. Carbon coated textiles for flexible energy storage10.1039/c1ee02421c ↗
31. Printed energy storage devices by integration of electrodes and separators into single sheets of paper10.1063/1.3425767 ↗
32. Paper supercapacitors by a solvent-free drawing method10.1039/c1ee01853a ↗
33. Freestanding three-dimensional graphene/MnO2 composite networks as ultralight and flexible supercapacitor electrodes10.1021/nn304833s ↗
34. Flexible energy storage devices based on graphene paper10.1039/c0ee00640h ↗
35. Flexible all-solid-state asymmetric supercapacitors based on free-standing carbon nanotube/graphene and Mn3O4 nanoparticle/graphene paper electrodes10.1021/am302280b ↗
36. Cellulose nanofiber–graphene all solid-state flexible supercapacitors10.1039/C2TA00386D ↗
37. Hemocompatibility and ultrafiltration performance of surface-functionalized polyethersulfone membrane by blending comb-like amphiphilic block copolymer10.1016/j.memsci.2014.08.013 ↗
38. Toward a highly hemocompatible membrane for blood purification via a physical blend of miscible comb-like amphiphilic copolymers10.1039/c3bm60250h ↗
39. Biocompatibility of modified polyethersulfone membranes by blending an amphiphilic triblock co-polymer of poly(vinyl pyrrolidone)–b–poly(methyl methacrylate)–b–poly(vinyl pyrrolidone)10.1016/j.actbio.2011.05.026 ↗
40. Modification of polyethersulfone membranes – a review of methods10.1016/j.pmatsci.2012.07.002 ↗
41. Influence of nitric acid modification of ordered mesoporous carbon materials on their capacitive performances in different aqueous electrolytes10.1016/j.jpowsour.2011.12.044 ↗
42. Synthesis of an ordered macroporous carbon with 62 nm spherical pores that exhibit unique gas absorptionproperties10.1039/b204756j ↗
43. Fabrication of well-ordered macroporous active carbon with a microporous framework10.1039/b103722f ↗
44. Toward interconnected hierarchical porous structure via chemical depositing organic nano-polyaniline on inorganic carbon scaffold for supercapacitor10.1016/j.synthmet.2014.11.034 ↗
45. Study on spectroscopic characterization and property of PES/micro-nano cellulose composite membrane material
46. Effect of different oxidizing agent treatments on the surface properties of activated carbons10.1016/S0008-6223(98)00328-5 ↗
47. Thermal regeneration of a spent activated carbon previously used as hydrogen sulfide adsorbent10.1016/S0008-6223(00)00266-9 ↗
48. A family of highly ordered mesoporous polymer resin and carbon structures from organic self-assembly10.1021/cm060921u ↗
49. Flexible of multiwalled carbon nanotubes/manganese dioxide nanoflake textiles for high-performance electrochemical capacitors10.1016/j.electacta.2014.12.023 ↗
50. Polyaniline nanoparticles grown on the surface of carbon microspheres aggregations for electrochemical supercapacitors10.1016/j.synthmet.2011.11.020 ↗
51. A Sol-gel process for the synthesis of NiCo2O4 having improved specific capacitance and cycle stability for electrochemical capacitors10.1149/2.057208jes ↗
52. Improved electrochemical performance of hierarchical porous carbon/polyaniline composites10.1016/j.electacta.2012.04.007 ↗