journal article·2016-10Open access

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

Julio Luna, Samir Jemei, Nadia Yousfi-Steiner, Attila Husar, Maria Serra, Daniel Hissel

Abstract

In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Dynamic modelling and simulation of a polymer membrane fuel cell including mass transport limitation10.1016/S0360-3199(97)00043-8 ↗
2. Computational fluid dynamics modeling of proton exchange membrane fuel cells10.1149/1.1394090 ↗
3. Passivity based control of a distributed PEM fuel cell model10.1016/j.jprocont.2009.11.008 ↗
4. Mathematical modeling, steady-state and dynamic behavior, and control of fuel cells: a review10.1021/ie100032c ↗
5. Constrained predictive control strategies for PEM fuel cells
6. Control-oriented modeling and experimental validation of a PEMFC generation system10.1109/TEC.2011.2124462 ↗
7. Real-time implementation of a neural model-based self-tuning PID strategy for oxygen stoichiometry control in PEM fuel cell10.1016/j.ijhydene.2014.06.039 ↗
8. Linear identification and model adjustment of a PEM fuel cell stack10.1016/j.ijhydene.2008.04.052 ↗
9. Nonlinear distributed parameter observer design for fuel cell systems10.1016/j.ijhydene.2015.05.132 ↗
10. J. Luna, E. Usai, A. Husar, M. Serra, Nonlinear observation in fuel cell systems: a comparison between disturbance estimation and high-order sliding-mode techniques, Int. J. Hydrogen Energy doi:10.1016/j.ijhydene.2016.06.041.10.1016/j.ijhydene.2016.06.041 ↗
11. Observer-based air excess ratio control of a PEM fuel cell system via high-order sliding mode10.1109/TIE.2015.2412520 ↗
12. PEM fuel cell system optimization
13. Model-based control strategies in the dynamic interaction of air supply and fuel cell10.1243/0957650042456999 ↗
14. Coolant controls of a PEM fuel cell system10.1016/j.jpowsour.2007.12.066 ↗
15. Pressure control in a PEM fuel cell via second order sliding mode10.1016/j.ijhydene.2012.08.007 ↗
16. Understanding and approaches for the durability issues of pt-based catalysts for PEM fuel cell10.1016/j.jpowsour.2007.07.004 ↗
17. Recent advances in activity and durability enhancement of pt/c catalytic cathode in PEMFC: Part II: degradation mechanism and durability enhancement of carbon supported platinum catalyst10.1016/j.jpowsour.2007.07.048 ↗
18. Effect of carbon black support corrosion on the durability of pt/c catalyst10.1016/j.jpowsour.2007.06.084 ↗
19. A review of accelerated stress tests of MEA durability in PEM fuel cells10.1016/j.ijhydene.2008.10.012 ↗
20. Understanding the performance degradation of anion-exchange membrane direct ethanol fuel cells10.1016/j.ijhydene.2011.11.086 ↗
21. A review on polymer electrolyte membrane fuel cell catalyst degradation and starvation issues: causes, consequences and diagnostic for mitigation10.1016/j.jpowsour.2009.03.060 ↗
22. Maciejowski · 2002
23. Grüne · 2011
24. Nonlinear predictive control for the concentrations profile regulation under unknown reaction disturbances in a fuel cell anode gas channel10.1016/j.jpowsour.2015.02.033 ↗
25. Efficiency optimisation of an experimental PEM fuel cell system via super twisting control
26. Nonlinear robust control of proton exchange membrane fuel cell by state feedback exact linearization10.1016/j.jpowsour.2009.04.077 ↗
27. Electrode structure effects on the performance of open-cathode proton exchange membrane fuel cells: a multiscale modeling approach10.1016/j.ijhydene.2014.03.218 ↗
28. Barbir · 2013
29. On the modeling of water transport in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.070 ↗
30. New equations for computing vapor pressure and enhancement factor10.1175/1520-0450(1981)020<1527:NEFCVP>2.0.CO;2 ↗
31. Neubrand · 1999
32. Simulation and analysis of transient fuel cell system performance based on a dynamic reactant flow model
33. Load governor based on constrained extremum seeking for pem fuel cell oxygen starvation and compressor surge protection10.1016/j.ijhydene.2013.08.109 ↗
34. Bahia Bench V2.1–A1, http://www.areva.com/EN/operations-4576/bahia-bench-overview.html.
35. A multi-timescale modeling methodology for pemfc performance and durability in a virtual fuel cell car10.1016/j.ijhydene.2015.09.152 ↗
36. Quasi-continuous HOSM control for systems with unmatched perturbations10.1016/j.automatica.2010.07.002 ↗
37. Higher-order sliding modes, differentiation and output-feedback control10.1080/0020717031000099029 ↗