Influence of temperature and atmosphere on the strength and elastic modulus of solid oxide fuel cell anode supports
Source abstract
Abstract
Abstract Solid Oxide Fuel Cells are subjected to significant stresses during production and operation. The various stress-generating conditions impose strength requirements on the cell components, and thus the mechanical properties of the critical load bearing materials at relevant operational conditions need to be characterized to ensure reliable operation. In this study, the effect of reduction temperature on microstructural stability, high temperature strength and elastic modulus of Ni−YSZ anode supports were investigated. The statistical distribution of strength was determined from a large number of samples (∼30) at each condition to ensure high statistical validity. It is revealed that the microstructure and mechanical properties of the Ni−YSZ strongly depend on the reduction temperature. Further studies were conducted to investigate the temperature dependence of the strength and elastic modulus for both the unreduced and reduced Ni(O)−YSZ anode supports. With increasing temperature, the strength and elastic modulus of the reduced Ni−YSZ specimens drop almost linearly. In contrast, the strength and elastic modulus of the unreduced NiO−YSZ remain almost constant over the investigated temperature range. Compared to the NiO-YSZ, a significantly lower strength and elastic modulus of the reduced Ni-YSZ is observed; while reduction leads to a remarkable increase in failure strain of the anode support.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Concrete and Cement Materials Research · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Minh · J. Am. Ceram. Soc. · 1993 · 3 · 56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Singhal · 2003
3. Steele · Nature · 2001 · 414 · 34510.1038/35104620 ↗
4. Faes · Membranes · 2012 · 2 · 58510.3390/membranes2030585 ↗
5. Wang · Solid State Ion. · 2006 · 177 · 151710.1016/j.ssi.2006.07.010 ↗
6. Radovic · Acta Mater · 2004 · 52 · 574710.1016/j.actamat.2004.08.023 ↗
7. Nakajo · Ceram. Int. · 2012 · 38 · 390710.1016/j.ceramint.2012.01.043 ↗
8. Charlas · J. Power Sources · 2015 · 288 · 24310.1016/j.jpowsour.2015.04.105 ↗
9. Weibull · Ingenioersvetens Kapskad Handl. · 1939 · 151 · 1
10. Weibull · J. Appl. Mech. · 1951 · 18 · 29310.1115/1.4010337 ↗
11. Malzbender · J. Eur. Ceram. Soc. · 2008 · 28 · 24710.1016/j.jeurceramsoc.2007.05.017 ↗
12. Frandsen · J. Eur. Ceram. Soc. · 2012 · 32 · 104110.1016/j.jeurceramsoc.2011.11.015 ↗
13. Frandsen · J. Power Sources · 2014 · 258 · 19510.1016/j.jpowsour.2014.02.036 ↗
14. Khalili · J. Mater. Sci. · 1991 · 26 · 674110.1007/BF02402669 ↗
15. Failure probability of solid oxide fuel cells
16. Faes · Fuel Cells · 2010 · 11 · 68210.1002/fuce.201100038 ↗
17. Biswas · Ceram. Int. · 2013 · 39 · 310310.1016/j.ceramint.2012.09.090 ↗
18. Faes · J. Fuel Cell Sci. Technol. · 2010 · 7 · 05101110.1115/1.4001019 ↗
19. Goutianos · J. Eur. Ceram. Soc. · 2010 · 30 · 317310.1016/j.jeurceramsoc.2010.07.028 ↗
20. Fleischhauer · J. Power Sources · 2015 · 273 · 23710.1016/j.jpowsour.2014.09.068 ↗
21. Sukino · ECS Trans. · 2011 · 35 · 147310.1149/1.3570133 ↗
22. Sato · ECS Trans. · 2013 · 57 · 75310.1149/05701.0753ecst ↗
23. Pihlatie · J. Eur. Ceram. Soc. · 2009 · 29 · 165710.1016/j.jeurceramsoc.2008.10.017 ↗
24. Biswas · J. Mater. Sci. · 2009 · 44 · 77810.1007/s10853-008-3141-9 ↗
25. Hagen · J. Electrochem. Soc. · 2006 · 153 · A116510.1149/1.2193400 ↗
26. Klemenso · J. Am. Ceram. Soc. · 2007 · 90 · 182710.1111/j.1551-2916.2007.01538.x ↗
27. http://rsbweb.nih.gov/ij/.
28. Accelerated creep in solid oxide fuel cell Ni-YSZ anode supports during reduction
29. Weibull · 1939
30. Laurencin · J. Eur. Ceram. Soc. · 2008 · 28 · 110.1016/j.jeurceramsoc.2007.06.003 ↗
31. Frandsen · Mech. Mater · 2014 · 73 · 2810.1016/j.mechmat.2013.10.010 ↗
32. Quinn · J. Am. Ceram. Soc. · 2003 · 86 · 47510.1111/j.1151-2916.2003.tb03324.x ↗
33. Radovic · Mater. Sci. Eng. A · 2004 · 368 · 5610.1016/j.msea.2003.09.080 ↗
34. Pecanac · J. Membr. Sci. · 2011 · 385–386 · 26310.1016/j.memsci.2011.10.005 ↗
35. Deng · J. Am. Ceram. Soc. · 2002 · 85 · 196110.1111/j.1151-2916.2002.tb00388.x ↗
36. Griffith · Phil. Trans. Roy. Soc. · 1921 · 221 · 16310.1098/rsta.1921.0006 ↗
37. Marigo · Contin. Mech. Thermodyn. · 2004 · 16 · 39110.1007/s00161-003-0164-y ↗
38. Ni · J. Eur. Ceram. Soc. · 2012 · 32 · 362710.1016/j.jeurceramsoc.2012.05.001 ↗
39. Kim · J. Am. Ceram. Soc. · 1998 · 81 · 213010.1111/j.1151-2916.1998.tb02748.x ↗
40. Kim · J. Am. Ceram. Soc. · 1999 · 82 · 160110.1111/j.1151-2916.1999.tb01967.x ↗
41. Hidnert · J. Res. Nat. Bur. Stand · 1957 · 58 · 8910.6028/jres.058.011 ↗
42. Ardigo · J. Power Sources · 2011 · 196 · 203710.1016/j.jpowsour.2010.09.063 ↗
43. Danzer · Z. Fur Met. · 2001 · 92 · 773
44. Kwok · J. Eur. Ceram. Soc. · 2014 · 34 · 142310.1016/j.jeurceramsoc.2013.12.005 ↗
45. Standard practice for reporting uniaxial strength data and estimating Weibull distribution parameters for advanced ceramics, ASTM _ C1239–07.
46. Kalish · J. Am. Ceram. Soc. · 1969 · 52 · 3010.1111/j.1151-2916.1969.tb12655.x ↗
47. Kim · Acta Mater · 2007 · 55 · 72710.1016/j.actamat.2006.08.059 ↗
48. http://www.engineeringtoolbox.com/young-modulus-d_773.html.
49. Selcuk · J. Eur. Ceram. Soc. · 1997 · 17 · 152310.1016/S0955-2219(96)00247-6 ↗
50. Rice · 1998
51. Fan · Ceram. Int. · 2013 · 39 · 687710.1016/j.ceramint.2013.02.022 ↗
52. Schmidt · J. Mater. Sci. · 2014 · 49 · 719210.1007/s10853-014-8427-5 ↗
53. Ni · Philos. Mag. · 2013 · 93 · 441210.1080/14786435.2013.833354 ↗
54. Ren · Philos. Mag. · 2009 · 89 · 116310.1080/14786430902915388 ↗
55. Kwok · J. Am. Ceram. Soc. · 2015 · 98 · 287310.1111/jace.13712 ↗