Pumpless thermal management of water-cooled high-temperature proton exchange membrane fuel cells
Source abstract
Abstract
Proton exchange membrane fuel cells (PEMFCs) have been considered for combined heat and power (CHP) applications, but cost reduction has remained an issue for commercialization. Among various types of PEMFC, the high-temperature (HT) PEMFC is gaining more attention due to the simplicity of the system, that will make the total system cost lower. A pumpless cooling concept is introduced to reduce the number of components of a HT PEMFC system even further and also decrease the parasitic power required for operating the system. In this concept, water is used as the coolant, and the buoyancy force caused by the density difference between vapour and liquid when operated above boiling temperate is utilized to circulate the coolant between the stack and the cooling device. In this study, the basic parameters required to design the cooling device are discussed, and the stable operation of the HT PEMFC stack in both the steady-state and during transient periods is demonstrated. It found that the pumpless cooling method provides more uniform temperature distribution within the stack, regardless of the direction of coolant flow.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Srinivasan · Rev. Energy Environ. · 1999 · 24 · 28110.1146/annurev.energy.24.1.281 ↗
2. Tang · Electrochem. Commun. · 2007 · 9 · 200310.1016/j.elecom.2007.05.024 ↗
3. Santiago · Electrochim. Acta · 2009 · 54 · 411110.1016/j.electacta.2009.02.040 ↗
4. Asensio · J. Electrochem. Soc. · 2004 · 151 · A30410.1149/1.1640628 ↗
5. Zhang · J. Power Sources · 2006 · 160 · 87210.1016/j.jpowsour.2006.05.034 ↗
6. Wannek · Fuel Cells · 2008 · 8 · 8710.1002/fuce.200700059 ↗
7. Li · Prog. Polym. Sci. · 2009 · 34 · 44910.1016/j.progpolymsci.2008.12.003 ↗
8. Li · J. Electrochem. Soc. · 2003 · 150 · A159910.1149/1.1619984 ↗
9. Kandlikar · Appl. Thermal Eng. · 2009 · 29 · 127610.1016/j.applthermaleng.2008.05.009 ↗
10. Koh · J. Power Sources · 2005 · 144 · 12210.1016/j.jpowsour.2004.12.055 ↗
11. Sohn · J. Power Sources · 2005 · 145 · 60410.1016/j.jpowsour.2005.02.062 ↗
12. Adzakpa · J. Power Sources · 2008 · 179 · 16410.1016/j.jpowsour.2007.12.102 ↗
13. Peng · J. Power Sources · 2006 · 162 · 118210.1016/j.jpowsour.2006.08.001 ↗
14. Lee · J. Power Sources · 2002 · 107 · 11010.1016/S0378-7753(01)00989-2 ↗
15. Scholta · J. Power Sources · 2009 · 190 · 8310.1016/j.jpowsour.2008.10.124 ↗
16. Andreasen · Int. J. Hydrogen Energy · 2008 · 33 · 465510.1016/j.ijhydene.2008.05.076 ↗
17. Pfeifer · Int. J. Hydrogen Energy · 2009 · 345710.1016/j.ijhydene.2009.02.041 ↗
18. S.J. Lee, D.Y. Seung, T.W. Song, US2008/0050628.
19. Incoprera · 1996
20. Sadik · 1987
21. Dhir · J. Heat Transfer · 1971 · 9310.1115/1.3449773 ↗
22. Gigliucci · J. Power Sources · 2004 · 131 · 6210.1016/j.jpowsour.2004.01.010 ↗
23. Chu · J. Power Sources · 2008 · 176 · 49910.1016/j.jpowsour.2007.08.072 ↗
24. Yi · 2009