journal article·2006-09

Effects of parameter uncertainty on the performance variability of proton exchange membrane (PEM) fuel cells

A. Mawardi, R. Pitchumani

Journal of Power Sources· Volume 160· Issue 1
Publisher page

Abstract

Operation of fuel cells is subject to inherent uncertainty in various material and operating parameters, which causes performance variability and impacts the reliability of the cells. Analysis of the interactive effects of parameter uncertainty on the fuel cell performance is imperative in a robust design endeavor. To this end, a methodology for simulation of fuel cell operation under uncertainty is presented by considering a one-dimensional nonisothermal description of the governing physical phenomena. A sampling-based stochastic model is developed, and parametric analysis is presented to elucidate the effects of uncertainty in several operating parameters on the variability of power density of the fuel cell. Robust design maps are derived from the analysis which provide for selection of cell temperature and anode and cathode pressures as functions of the input parameter uncertainty and target maximum acceptable variability in the power density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Larminie · 2000
2. An engineering model of proton exchange membrane fuel cell performance10.1007/s007770050014 ↗
3. A water and heat management model for proton exchange membrane fuel cells10.1149/1.2220792 ↗
4. Water and thermal management in solid polymer electrolyte fuel cells10.1149/1.2220960 ↗
5. Water-balance calculations for solid polymer electrolyte fuel cells10.1149/1.2086220 ↗
6. A comparative study of water uptake and transport through iononomeric fuel cell membranes10.1149/1.2220749 ↗
7. Water uptake by and transport through Nafion 117 membranes10.1149/1.2056194 ↗
8. Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte10.1002/aic.690370805 ↗
9. A mathematical model of the solid polymer electrolyte fuel cell10.1149/1.2221251 ↗
10. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
11. Modeling and experimental diagnostics in polymer electrolyte fuel cells10.1149/1.2221120 ↗
12. Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding10.1016/S0378-7753(99)00426-7 ↗
13. Mathematical modeling of proton exchange membrane fuel cells10.1016/S0378-7753(01)00798-4 ↗
14. Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell10.1149/1.2043866 ↗
15. A model predicting transient responses of proton exchange membrane fuel cells10.1016/S0378-7753(96)02360-9 ↗
16. Two-dimensional model for proton exchange membrane fuel cells10.1002/aic.690441109 ↗
17. Computational fluid dynamics modeling of proton exchange membrane fuel cells10.1149/1.1394090 ↗
18. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
19. A two-phase flow and transport model for the cathode of PEM fuel cells10.1016/S0017-9310(01)00322-2 ↗
20. You, L. The two phase flow, transport mechanism and performance studies for PEM fuel cells, PhD Dissertation, University of Miami, 2001.
21. Measurement and prediction of electrical contact resistance between gas diffusion layers and bipolar plate for applications to PEM fuel cells10.1115/1.1782917 ↗
22. Analysis and design of PEM fuel cells10.1016/j.jpowsour.2004.08.051 ↗
23. Optimization of the operating parameters of a proton exchange membrane fuel cell for maximum power density10.1115/1.1867978 ↗
24. Characterization and quantification of uncertainty in solid oxide fuel cell hybrid power plants10.1016/j.jpowsour.2004.09.030 ↗
25. Multi-objective optimization for hybrid fuel cells power system under uncertainty10.1016/j.jpowsour.2003.12.053 ↗
26. Stochastic analysis of isothermal cure of resin systems10.1002/pc.10336 ↗
27. Cure cycle design for thermosetting-matrix composites fabrication under uncertainty10.1023/B:ANOR.0000045275.81357.ca ↗
28. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1149/1.1646148 ↗
29. Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells10.1016/j.electacta.2004.04.027 ↗
30. Two-phase transport in polymer electrolyte fuel cells with bilayer diffusion media10.1149/1.1938067 ↗
31. Model for polymer electrolyte fuel cell operation on reformate feed10.1149/1.1344516 ↗
32. Modification of Newman's BAND(J) subroutine to multi-region systems containing interior boundaries: MBAND10.1149/1.2085854 ↗
33. R.L. Iman, M.J. Shortencarier, A FORTRAN77 program and user's guide for generation of latin hypercube and random samples for use with computer models, Technical Report, NUREG/CR-3624, SAND83-2365, Sandia National Laboratories, Albuquerque NM, 1984.10.2172/7091452 ↗
34. An efficient sampling technique for off-line quality control10.2307/1271135 ↗