journal article·2015-05Open access

Determining the representative volume element size for three-dimensional microstructural material characterization. Part 1: Predictive models

William M. Harris, Wilson K.S. Chiu

Abstract

Abstract Recent advances in microstructural imaging and characterization tools have led to an increase in the direct examination of 3-D microstructures of composite materials in devices such as solid oxide fuel cells, battery electrodes, and composite gas separation membranes. In particular, focused ion beam-scanning electron microscopy and x-ray nanotomography methods have opened the door for materials characterization at the tens of nanometer scale. These experimental methods have enabled the quantitative evaluation of microstructures for a variety of important parameters. However, there is often uncertainty in the literature regarding the necessary size of a representative volume element (RVE) in order to capture an accurate description of the structure. In an effort to provide guidance for the field, in this work simplified geometric models are presented to provide basis for the a priori estimation of RVE size for three common microstructural parameters: volume fraction, particle size, and network contiguity. In a second and complementary paper (Part 2), the results of the model will be compared to experimental data obtained from the extensive imaging of a multiphase composite membrane material using x-ray nanotomography.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Composite Material Mechanics · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Determination of the size of the representative volume element for random composites: statistical and numerical approach10.1016/S0020-7683(03)00143-4 ↗
2. Representative volume: existence and size determination10.1016/j.engfracmech.2006.12.021 ↗
3. Fluctuations, correlation and representative elementary volume (REV) in granular materials
4. Material spatial randomness: from statistical to representative volume element10.1016/j.probengmech.2005.07.007 ↗
5. Numerical determination of representative volumes for granular materials10.1016/j.cma.2003.09.023 ↗
6. Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers10.1016/j.actamat.2006.03.042 ↗
7. On a representative volume in the micromechanics of particulate composites10.1023/A:1010646702365 ↗
8. Linking the microstructure, performance and durability of Ni-yttria-stabilized zirconia solid oxide fuel cell anodes using three-dimensional focused ion beam-scanning electron microscopy imaging10.1016/j.scriptamat.2010.09.025 ↗
9. Impact of pore microstructure evolution on polarization resistance of Ni-Yttria-stabilized zirconia fuel cell anodes10.1016/j.jpowsour.2010.10.084 ↗
10. Quantitative Characterization of LiFePO4 cathodes reconstructed by FIB/SEM tomography10.1149/2.033207jes ↗
11. Nondestructive nanoscale 3D elemental mapping and analysis of a solid oxide fuel cell anode10.1149/1.3355957 ↗
12. Exploring microstructural changes associated with oxidation in Ni–YSZ SOFC electrodes using high resolution X-ray computed tomography10.1016/j.ssi.2011.10.015 ↗
13. Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery10.1016/j.elecom.2009.12.038 ↗
14. Relationship between the representative volume element and mechanical properties of asphalt concrete10.1061/(ASCE)0899-1561(2001)13:1(77) ↗
15. Characterisation of solid oxide fuel cell Ni–8YSZ substrate by synchrotron X-ray nano-tomography: from 3D reconstruction to microstructure quantification10.1016/j.jpowsour.2011.09.105 ↗
16. Connected three-phase boundary length evaluation in modeled sintered composite solid oxide fuel cell electrodes10.1149/1.3459902 ↗
17. Focused ion beam preparation of samples for X-ray nanotomography10.1107/S0909049512027252 ↗
18. Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data10.1016/j.electacta.2012.04.133 ↗
19. Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes10.1016/j.jpowsour.2008.12.145 ↗
20. Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodes10.1016/j.ces.2013.06.032 ↗
21. Modelling the 3D microstructure and performance of solid oxide fuel cell electrodes: computational parameters10.1016/j.electacta.2011.04.065 ↗
22. Determination of the effective gas diffusivity of a porous composite medium from the three-dimensional reconstruction of its microstructure10.1103/PhysRevE.83.026310 ↗
23. Micro-modelling of solid oxide fuel cell electrodes10.1016/S0013-4686(97)00063-7 ↗
24. Simulation of mass transport in SOFC composite electrodes10.1007/s10800-008-9527-1 ↗
25. Percolation theory in SOFC composite electrodes: effects of porosity and particle size distribution on effective properties10.1016/j.jpowsour.2011.06.087 ↗
26. Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes10.1016/j.jpowsour.2009.02.051 ↗
27. Matheron · 1989
28. Bunde · 1991
29. Grimmett · 199910.1007/978-3-662-03981-6 ↗
30. Aharony · 2003
31. Relation between percolation and particle coordination in binary powder mixtures10.1016/0956-7151(91)90041-X ↗
32. Rigidity and conductivity percolation thresholds in particulate composites10.1016/0956-7151(95)90296-1 ↗
33. Physical properties of composites near percolation10.1146/annurev-matsci-070909-104529 ↗
34. Estimation of the co-ordination number in a multi-component mixture of spheres10.1016/0032-5910(83)87004-1 ↗
35. Monte Carlo study of the site-percolation model in two and three dimensions10.1103/PhysRevE.72.016126 ↗
36. Bond and site percolation in three dimensions10.1103/PhysRevE.87.052107 ↗
37. Random site percolation in three dimensions10.1142/S0129183198000261 ↗
38. Effects of boundary conditions on the critical spanning probability10.1142/S0129183198000534 ↗
39. Site percolation in randomly packed spheres10.1103/PhysRevB.20.4194 ↗
40. Percolation and cluster distribution. I. Cluster multiple labeling technique and critical concentration algorithm10.1103/PhysRevB.14.3438 ↗
41. Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling10.1016/j.jpowsour.2010.10.006 ↗
42. Characterization and analysis methods for the examination of the heterogeneous solid oxide fuel cell electrode microstructure. Part 1: volumetric measurements of the heterogeneous structure10.1016/j.jpowsour.2010.07.005 ↗
43. Tortuosity characterization of 3D microstructure at nano-scale for energy storage and conversion materials10.1016/j.jpowsour.2013.10.026 ↗
44. Three-dimensional reconstruction and analysis of an entire solid oxide fuel cell by full-field transmission X-ray microscopy10.1016/j.jpowsour.2013.01.060 ↗