Anode and cathode overpotentials and temperature profiles in a PEMFC
Source abstract
Abstract
Abstract The separate anodic and cathodic overpotentials in a proton exchange membrane fuel cell (activation, ohmic, concentration and mass transport) were measured in conventional and segmented hardware via reference electrodes, and multi-component gas analysis. The results show that the anodic overpotentials cannot be ignored, even when the operating conditions are changed at the cathode only. Under drying conditions the difference in the current density across the active area creates in-plane thermal gradients due to inhomogeneous reaction rates, and water phase changes. The resulting inhomogeneous temperature distributions can result in membrane and electrode degradation. The combination of reference electrodes and multi-component gas analysis enables the measurement and calculation of kinetic and diffusion parameters that can be used for modeling, and improved fuel cell design, efficiency, and durability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Gas crossover and membrane degradation in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.008 ↗
2. Gasteiger · 2003
3. Reference electrode placement and seals in electrochemical oxygen generators10.1016/S0167-2738(00)00711-6 ↗
4. Catalyst coated composite membranes
5. Estimation of mass-transport overpotentials during long-term PEMFC operation10.1149/1.3454740 ↗
6. Hamann · 1998
7. Sensing electrodes for failure diagnostics in fuel cells10.1016/j.jpowsour.2008.08.034 ↗
8. Proton transfer and proton concentrations in protonated nafion fuel cell membranes10.1021/jp9036777 ↗
9. Exploring single electrode reactions in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.108 ↗
10. Heat and mass transfer in polymer electrolyte fuel cells in ultra-low humidity operation10.1149/1.3210583 ↗
11. A study of water transport as a function of the micro29 porous layer arrangement in PEMFCs10.1016/j.ijhydene.2010.05.123 ↗
12. Compact dynamic hydrogen electrode unit as a reference electrode for PEMFCs10.1016/j.jpowsour.2005.05.045 ↗
13. Relationships between water management, contamination and lifetime degradation in PEFC
14. Mass transport phenomena in proton exchange membrane fuel cells using O[sub 2]/He, O[sub 2]/Ar, and O[sub 2]/N[sub 2] mixtures10.1149/1.2055066 ↗
15. Mass Transport phenomena in proton exchange membrane fuel cells using O[sub 2]/He, O[sub 2]/Ar, and O[sub 2]/N[sub 2] mixtures10.1149/1.2055065 ↗
16. A printed circuit board approach to measuring current distribution in a fuel cell10.1023/A:1003206513954 ↗
17. Design of an optical thermal sensor for proto1 n exchange membrane fuel cell temperature measurement using phosphor thermometry10.1016/j.jpowsour.2010.02.071 ↗
18. Electrochemical impedance spectroscopy applied to polymer electrolyte fuel cells with a pseudo reference electrode arrangement10.1016/j.electacta.2005.02.108 ↗
19. Experimental investigation of spatial-temporal current distribution in a PEM fuel cell
20. Combined local current distribution measurements and high resolution neutron radiography of operating direct methanol fuel cells10.1016/j.elecom.2009.06.008 ↗
21. In-situ methods for the determination of current distributions in PEM fuel cells10.1016/S0013-4686(98)00137-6 ↗
22. On the temperature distribution in polymer electrolyte fuel cells10.1016/j.jpowsour.2010.03.024 ↗
23. New reference electrode approach for fuel cell performance evaluation10.1149/1.2982032 ↗
24. Preferred position for the reference electrode in solid state electrochemistry10.1016/S0167-2738(02)00177-7 ↗
25. Realising a reference electrode in a polymer electrolyte fuel cell by laser ablation10.1007/s10800-007-9352-y ↗
26. Fuel cells – proton-exchange membrane fuel cells|catalysts: life-limiting considerations10.1016/B978-044452745-5.00234-3 ↗
27. Nano-silicon carbide supported catalysts for PEM fuel cells with high electrochemical stability and improved performance by addition of carbon10.1016/j.apcatb.2010.07.030 ↗
28. Principles of MEA preparation
29. The effect of low humidity on the uniformity and stability of segmented PEM fuel cells10.1016/j.jpowsour.2007.12.078 ↗
30. Spatially resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions10.1016/j.jpowsour.2006.06.073 ↗