Fuel cell modelling for building cogeneration applications
Source abstract
Abstract
Fuel cell technologies are an emerging alternative to combustion-based cogeneration and traditional, centralized power generation. To accurately size fuel cell systems for houses and predict their performance, a system model that can be integrated into existing building simulation tools is required. A steady-state model of a generic PEM cogeneration fuel cell system was developed to fill this need. The model is useful for (i) estimating system fuel use, and electrical and thermal production, (ii) investigating the suitability of fuel cell systems in different climates, (iii) sizing fuel cell systems and ancillary equipment, and (iv) evaluating different control strategies. The model has been validated using empirical data and published estimates produced with other models. In this paper, the development of the model and the results of these validation studies are discussed. Also, the results from a Canadian case study investigating the effect of varying fuel cell size on the performance of a cogeneration system are presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. M. Aydinalp, A. Fung, V.I. Ugursal, Household end-use energy consumption in 1997, Technical Report, Canadian Residential Energy End-use Data and Analysis Centre, 2000.
2. I. Beausoleil-Morrison, D. Cuthbert, G. Deuchars, G. McAlary, The simulation of fuel cell cogeneraion systems within residential buildings, in: Proceedings of ESim, the Bi-Annual Conference of IBPSA-Canada. IBPSA-Canada, September 2002.
3. D. Doss, K. Kumar, R. Ahluwalia, M. Krumplet, Fuel processors for automotive fuel cell systems: a parametric analysis, J. Power Sources 102 (2001) 1–15.10.1016/S0378-7753(01)00784-4 ↗
4. M. Ellis, M. Von Spakovsky, D. Nelson, Fuel cell systems: efficient, flexible energy conversion for the 21st century, Proceedings of the IEEE December 2001, 89 (12) (2001) 1808–1818.10.1109/5.975914 ↗
5. A. Ferguson, Fuel cell modelling for building cogeneration applications, Master’s Thesis, Dalhousie University, Halifax, Nova Scotia, Canada, February 2003.
6. A. Ferguson, I. Beausoleil-Morrison, V. Ugursal, A comparative assessment of fuel cell cogeneration heat recovery models, in: Proceedings of Building Simulation 2003, The Eighth International IBPSA Conference, August 2003.
7. General Motors Corporation, Research and development of proton-exchange-membrane (PEM) fuel cell system of transportation applications, Initial Conceptual Design Report 1994, Republished by Business/Technology Books.
8. General Motors Corporation, Research and development of proton-exchange-membrane (PEM) fuel cell system of transportation applications, Phase I. Final Report 1996, US Department of Energy Contract no. DE-AC02-90CH10435.
9. J. Hirschenhofer, Fuel Cell Handbook, Fourth Edition, Federal Energy Technology Center, US Department of Energy, 1998.
10. R. Judkoff, J. Neymark, International energy agency building energy simulation test (BESTEST) and diagnostic method, Technical Report, National Renewable Energy Laboratory, US Department of Energy, 1995.10.2172/90674 ↗
11. T. Kreutz, J. Ogden, Assessment of hydrogen-fueled proton exchange membrane fuel cells for distributed generation and cogeneration, in: Proceedings of the 2000 US DOE Hydrogen Program Review, United States Department of Energy, 2000.
12. B. Linnhoff, User Guide on Process Integration for the Efficient Use of Energy, Institution of Chemical Engineers, 1994.
13. Natural Resources Canada, R-2000 technical requirements, Residential Building Energy Standard, Natural Resources Canada, 1994.
14. J. Purdy, I. Beausoleil-Morrison, The significant factors in modelling residential buildings, in: Proceedings of Building Simulation, 7th International Building Performance Association Conference. IBPSA-Canada, June 2001.
15. M. Swinton, H. Moussa, R. Marchand, Commissioning twin houses for assessing the performace of energy conserving technologies, in: Proceedings of Exterior Envelopes of While Buildings VIII: Integration of Building Envelopes, December 2001.
16. A parametric study of fuel cell system efficiency under part-load operation10.1016/S0378-7753(00)00497-3 ↗
17. R. Wolk, Fuel cells for homes and hospitals, IEEE Spectrum, May (1999) 45–52.10.1109/6.763203 ↗