journal article·2021-11Open access

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Dongjie Fan, Yi Gao, Fangsheng Liu, Tao Wei, Zhengmao Ye, Yihan Ling, Bin Chen, Yuan Zhang, Meng Ni, Dehua Dong

Abstract

Abstract Autothermal reforming of methane couples exothermal partial oxidation of methane and endothermal steam or dry reforming of methane to achieve high energy efficiency, which can be operated through solid oxide fuel cells (SOFCs) so that expensive oxygen is not required and safety issue caused by CH4/O2 mixture is avoided. In addition, electric power is simultaneously generated. This study has demonstrated the efficient electrochemical autothermal reforming of methane over a SOFC reactor integrated with catalyst beds within anode channel structure. The catalyst bed reformer increases syngas yield by a factor of about 6 owing to the increased methane conversion and syngas selectivity. By numerical assessment, enhanced mass transportation is well validated by high fuel accessibility at the electrode-electrolyte interface benefiting from the integrated catalyst beds. Compared with conventional catalyst layer on anode surface, the catalyst beds are more efficient for conducting methane reforming. After the initial stabilization of cell microstructure, the SOFC reactor has demonstrated stable cell performance and syngas yield during the test for 120 h. The integrated SOFC reactor has demonstrated a promising application in performing catalytic reforming reactions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Catalysts for Methane Reforming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Characteristics of Sr1−xYxTi1−yRuyO3+/−δ and Ru-impregnated Sr1−xYxTiO3+/−δ perovskite catalysts as SOFC anode for methane dry reforming10.1016/j.apsusc.2020.145450 ↗
2. Modelling of one-step methanation process combining SOECs and fischer-tropsch-like reactor10.1149/2.0011611jes ↗
3. Electric power and synthesis gas co-generation from methane with zero waste gas emission10.1002/anie.201006855 ↗
4. Electrochemical characteristics and carbon tolerance of solid oxide fuel cells with direct internal dry reforming of methane10.1016/j.apenergy.2018.06.114 ↗
5. Development and validation of a Ni-based catalyst for carbon dioxide dry reforming of methane process coupled to solid oxide fuel cells10.1016/j.ijhydene.2019.04.187 ↗
6. Performance evaluation of solid oxide fuel cell with in-situ methane reforming10.1016/j.fuel.2015.08.050 ↗
7. Optimized Ni-based catalysts for methane reforming with O2-containing CO210.1016/j.apcatb.2021.120033 ↗
8. Highly stable nanofibrous La2NiZrO6 catalysts for fast methane partial oxidation10.1016/j.fuel.2019.116861 ↗
9. Ni/CeO2 promoted Ru and Pt supported on FeCrAl gauze for cycling methane catalytic partial oxidation—CPOX10.1016/j.apcatb.2020.119849 ↗
10. Carbon deposition in steam methane reforming over a Ni-based catalyst: experimental and thermodynamic analysis10.1016/j.energy.2021.119993 ↗
11. Plasma-catalytic dry reforming of methane over Ni-supported catalysts in a rotating gliding arc – spouted bed reactor10.1016/j.jcou.2021.101474 ↗
12. Combined methane reforming by carbon dioxide and steam in proton conducting solid oxide fuel cells for syngas/power co-generation10.1016/j.ijhydene.2019.02.244 ↗
13. Steam, dry and autothermal methane reforming for hydrogen production: a thermodynamic equilibrium analysis10.1016/j.jpowsour.2020.228391 ↗
14. Efficient operation of autothermal microchannel reactors for the production of hydrogen by steam methane reforming10.1016/j.ijhydene.2019.03.025 ↗
15. Modeling of autothermal reforming of methane in a fluidized bed reactor with perovskite membranes10.1016/j.cep.2017.07.010 ↗
16. Reactions of low concentration dry methane at Ni-YSZ anode in the SOFCs10.1016/S1872-5813(11)60010-8 ↗
17. Methane/steam global reforming kinetics over the Ni/YSZ of planar pre-reformers for SOFC systems10.1016/j.cej.2016.01.087 ↗
18. Durability of anode supported Solid Oxides Fuel Cells (SOFC) under direct dry-reforming of methane10.1016/j.cej.2013.01.003 ↗
19. Electrochemical properties and thermal neutral state of solid oxide fuel cells with direct internal reforming of methane10.1016/j.ijhydene.2019.03.048 ↗
20. Direct methane solid oxide fuel cells based on catalytic partial oxidation enabling complete coking tolerance of Ni-based anodes10.1016/j.jpowsour.2017.02.003 ↗
21. Direct-methane solid oxide fuel cell (SOFC) with Ni-SDC anode-supported cell10.1016/j.ijhydene.2017.07.117 ↗
22. Carbon deposition in CH4/CO2 operated SOFC: simulation and experimentation studies10.1016/j.jpowsour.2011.12.005 ↗
23. Effect of nickel content and preparation method on the performance of Ni-Al2O3 towards the applications in solid oxide fuel cells10.1016/j.ijhydene.2011.05.109 ↗
24. SOFC stack coupled with dry reforming10.1016/j.apenergy.2016.08.167 ↗
25. Effect of steam content on nickel nano-particle sintering and methane reforming activity of Ni–CZO anode cermets for internal reforming SOFCs10.1016/j.apcata.2011.10.035 ↗
26. Development of anodes for direct oxidation of methane fuel in solid oxide fuel cells10.1016/j.ijhydene.2016.03.169 ↗
27. A microchannel reactor-integrated ceramic fuel cell with dual-coupling effect for efficient power and syngas co-generation from methane10.1016/j.apcatb.2021.120443 ↗
28. Optimization of infiltration techniques used to construct Ni/YSZ anodes10.1149/2.056405jes ↗
29. CeO2Co3O4CuO anode for direct utilisation of methane or ethanol in solid oxide fuel cells10.1016/j.ijhydene.2018.01.192 ↗
30. Ni-(Ce0.8-xTix)Sm0.2O2-δ anode for low temperature solid oxide fuel cells running on dry methane fuel10.1016/j.jpowsour.2016.11.024 ↗
31. Catalytic CeO2 washcoat over microchanneled supporting cathodes of solid oxide electrolysis cells for efficient and stable CO2 reduction10.1016/j.jpowsour.2018.11.050 ↗
32. Comparison of fibrous catalysts and monolithic catalysts for catalytic methane partial oxidation10.1016/j.renene.2019.02.027 ↗
33. CeO2-promotion of NiAl2O4 reduction via CeAlO3 formation for efficient methane reforming10.1016/j.joei.2019.09.001 ↗
34. Performance and durability of solid oxide electrolysis cells10.1149/1.2216562 ↗
35. Tosun · 2007