Fault detection and isolation of high temperature proton exchange membrane fuel cell stack under the influence of degradation
Source abstract
Abstract
This study proposes a data-drive impedance-based methodology for fault detection and isolation of low and high cathode stoichiometry, high CO concentration in the anode gas, high methanol vapour concentrations in the anode gas and low anode stoichiometry, for high temperature PEM fuel cells. The fault detection and isolation algorithm is based on an artificial neural network classifier, which uses three extracted features as input. Two of the proposed features are based on angles in the impedance spectrum, and are therefore relative to specific points, and shown to be independent of degradation, contrary to other available feature extraction methods in the literature. The experimental data is based on a 35 day experiment, where 2010 unique electrochemical impedance spectroscopy measurements were recorded. The test of the algorithm resulted in a good detectability of the faults, except for high methanol vapour concentration in the anode gas fault, which was found to be difficult to distinguish from a normal operational data. The achieved accuracy for faults related to CO pollution, anode- and cathode stoichiometry is 100% success rate. Overall global accuracy on the test data is 94.6%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Hydrogen energy storage: new techno-economic emergence solution analysis10.1016/j.egypro.2015.07.629 ↗
2. Re-envisioning the role of hydrogen in a sustainable energy economy10.1016/j.ijhydene.2011.09.137 ↗
3. Hydrogen from renewable electricity: an international review of power-to-gas pilot plants for stationary applications10.1016/j.ijhydene.2012.12.010 ↗
4. Hydrogen as an energy vector in the islands' energy supply10.1016/j.ijhydene.2007.12.025 ↗
5. Liquid Organic Hydrogen Carriers as an efficient vector for the transport and storage of renewable energy10.1016/j.ijhydene.2012.08.066 ↗
6. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 C10.1021/cm0310519 ↗
7. A comprehensive review of PBI-based high temperature PEM fuel cells10.1016/j.ijhydene.2016.09.024 ↗
8. Chemical recycling of carbon dioxide to methanol and dimethyl ether: from greenhouse gas to renewable, environmentally carbon neutral fuels and synthetic hydrocarbons10.1021/jo801260f ↗
9. U.S. DOE · 2016
10. Diagnostic & health management of fuel cell systems: issues and solutions10.1016/j.arcontrol.2016.09.005 ↗
11. Diagnostic tools for PEMFCs: from conception to implementation10.1016/j.ijhydene.2014.04.163 ↗
12. A review on model-based diagnosis methodologies for PEMFCs10.1016/j.ijhydene.2013.03.106 ↗
13. A review on non-model based diagnosis methodologies for PEM fuel cell stacks and systems10.1016/j.ijhydene.2013.04.007 ↗
14. Model-based development of a fault signature matrix to improve solid oxide fuel cell systems on-site diagnosis10.1016/j.jpowsour.2015.01.037 ↗
15. Fuel cell flooding diagnosis based on time-constant spectrum analysis10.1016/j.ijhydene.2015.10.089 ↗
16. Diagnosis of hydrogen crossover and emission in proton exchange membrane fuel cells10.1016/j.ijhydene.2014.09.116 ↗
17. Onanena · 2012 · 651
18. Detection of flooding and drying inside a PEM fuel cell stack, Strojniski Vestnik10.5545/sv-jme.2012.640 ↗
19. A double-fuzzy diagnostic methodology dedicated to online fault diagnosis of proton exchange membrane fuel cell stacks10.1016/j.jpowsour.2014.07.157 ↗
20. Diagnosis of CO pollution in HTPEM fuel cell using statistical change detection10.1016/j.ifacol.2015.09.583 ↗
21. Electrical circuit analysis of CO poisoning in high temperature PEM fuel cells for rapid fault diagnostics10.1109/ECCE.2013.6647320 ↗
22. Ageing studies of a PEM Fuel Cell stack developed for reformate fuel operation in μCHP units: development of an accelerated degradation procedure
23. Fuel cells static and dynamic characterizations as tools for the estimation of their ageing time10.1016/j.ijhydene.2010.10.064 ↗
24. Long term testing in continuous mode of HT-PEMFC based H3PO 4/PBI celtec-PMEAs for μ-CHP applications10.1002/fuce.200800134 ↗
25. Fuzzy-clustering durability diagnosis of polymer electrolyte fuel cells dedicated to transportation applications10.1109/TVT.2007.898389 ↗
26. Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique - a review10.1016/j.jpowsour.2013.04.011 ↗
27. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
28. Effects of temperature and humidity on the cell performance and resistance of a phosphoric acid doped polybenzimidazole fuel cell10.1016/j.jpowsour.2010.05.057 ↗
29. Dynamic model of the high temperature proton exchange membrane fuel cell stack temperature10.1115/1.3081461 ↗
30. Oscillations in gas channels - Part I. The forgotten player in impedance spectroscopy in PEFCs10.1149/1.2435706 ↗
31. Oscillations in gas channels - Part II. Unraveling the characteristics of the low frequency loop in air-fed PEFC impedance spectra10.1149/1.2742291 ↗
32. High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy10.1016/j.ijhydene.2011.04.076 ↗
33. Performance and endurance of a high temperature PEM fuel cell operated on methanol reformate10.1016/j.ijhydene.2014.09.007 ↗
34. Experimental study to distinguish the effects of methanol slip and water vapour on a high temperature PEM fuel cell at different operating conditions
35. Comparative study of the break in process of post doped and sol-gel high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2014.07.017 ↗
36. Ac impedance study of a proton exchange membrane fuel cell stack under various loading conditions10.1115/1.3207871 ↗
37. Performance degradation tests of phosphoric acid doped polybenzimidazole membrane based high temperature polymer electrolyte membrane fuel cells10.1115/1.4029081 ↗
38. Effect of idling temperature on high temperature polymer electrolyte membrane fuel cell degradation under simulated start/stop cycling conditions10.1016/j.ijhydene.2016.05.091 ↗
39. Experimental investigation and numerical simulation of the electrolyte loss in a HT-PEM fuel cell10.1016/j.ijhydene.2014.11.041 ↗
40. Oppenheim · 1999
41. Alpaydin · 2010
42. Model based PEM fuel cell state-of-health monitoring via ac impedance measurements10.1016/j.jpowsour.2005.11.035 ↗
43. Diagnosis of a commercial PEM fuel cell stack via incomplete spectra and fuzzy clustering