journal article·2017-07Open access

High performance 1.2 Ah Si-alloy/Graphite|LiNi 0.5 Mn 0.3 Co 0.2 O 2 prototype Li-ion battery

Mario Marinaro, Dong-hwan Yoon, Giulio Gabrielli, Petra Stegmaier, Egbert Figgemeier, Paul C. Spurk, Daniël Nelis, Gregory Schmidt, Jerome Chauveau, Peter Axmann, Margret Wohlfahrt-Mehrens

Abstract

Abstract The study reports on realization and electrochemical testing of prototype Si-alloy/Graphite|LiNi 0.5 Mn 0.3 Co 0.2 O 2 batteries. Water soluble polyacrylic acid (PAA), used as the only binder at the anode side, demonstrates excellent dispersant and binding properties. Sedimentation tests and rheological measurements show remarkable stability and mostly a thinning behavior of the non-Newtonian type of slurry. The cathode is processed in N -Methylpyrrolidone based slurry using polyvinylidene fluoride (PVDF) as the binding agent. The electronic conductivities of the manufactured Si-alloy/Graphite and LiNi 0.5 Mn 0.3 Co 0.2 O 2 electrodes are evaluated. Furthermore, the cathode and anode electrochemical behavior is initially studied in half-cells, and subsequently in full Li-ion stacked prototype soft pouch-cells (1.22 Ah). It is demonstrated that the manufactured prototype cells can sustain about 290 charge/discharge galvanostatic cycles before the retained capacity drops below 80%. Cell aging is monitored using Electrochemical Impedance Spectroscopy (EIS), whereas post-mortem SEM analysis of electrodes cross-section is used to shed light on the causes of performance degradation of the cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
2. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
3. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
4. Phosphorous pentasulfide as a novel additive for high-performance lithium-sulfur batteries10.1002/adfm.201200696 ↗
5. High-stability graphene nano sheets/SnO2 composite anode for lithium ion batteries10.1016/j.electacta.2014.06.024 ↗
6. Graphene/silicon nanocomposite anode with enhanced electrochemical stability for lithium-ion battery applications10.1016/j.jpowsour.2014.07.064 ↗
7. ZnFe2O4-C/LiFePO4-CNT: a novel high-power lithium-ion battery with excellent cycling performance10.1002/aenm.201400054 ↗
8. Manufacturing of industry-relevant silicon negative composite electrodes for lithium ion-cells10.1016/j.jpowsour.2014.03.119 ↗
9. Chemical Formation of a solid electrolyte interface on the carbon electrode of a Li-ion cell10.1149/1.1838511 ↗
10. SBR–PVDF based binder for the application of SLMP in graphite anodes10.1039/c3ra42773k ↗
11. Application of Stabilized Lithium Metal Powder (SLMP) in graphite anode - a high efficient prelithiation method for lithium-ion batteries10.1016/j.jpowsour.2014.02.112 ↗
12. Prelithiation of silicon-carbon nanotube anodes for lithium ion batteries by stabilized lithium metal powder (SLMP)10.1021/nl401776d ↗
13. Toward pre-lithiatied high areal capacity silicon anodes for Lithium-ion batteries10.1016/j.electacta.2016.03.139 ↗
14. Evaluating Si-based materials for Li-ion batteries in commercially relevant negative electrodes10.1149/2.066405jes ↗
15. A silicon/double-shelled carbon yolk-like nanostructure as high-performance anode materials for lithium-ion battery10.1149/2.0611508jes ↗
16. A facile, low-cost synthesis of high-performance silicon-based composite anodes with high tap density for lithium-ion batteries10.1039/C4TA06113F ↗
17. Enhanced cycle life of si anode for li-ion batteries by using modified elastomeric binder10.1149/1.1847685 ↗
18. Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries10.1016/j.jpowsour.2006.03.073 ↗
19. Sodium carboxymethyl cellulose10.1149/1.2398725 ↗
20. New insights into the silicon-based electrode's irreversibility along cycle life through simple gravimetric method10.1016/j.jpowsour.2012.08.007 ↗
21. On the binding mechanism of CMC in Si negative electrodes for Li-ion batteries10.1016/j.elecom.2007.10.001 ↗
22. A major constituent of brown algae for use in high-capacity Li-Ion batteries10.1126/science.1209150 ↗
23. A highly cross-linked polymeric binder for high-performance silicon negative electrodes in lithium ion batteries10.1002/anie.201201568 ↗
24. High-capacity Si–graphite composite electrodes with a self-formed porous structure by a partially neutralized polyacrylate for Li-ion batteries10.1039/c2ee22292b ↗
25. Mussel-inspired adhesive binders for high-performance silicon nanoparticle anodes in lithium-ion batteries10.1002/adma.201203981 ↗
26. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
27. Study on polymer binders for high-capacity SiO negative electrode of Li-Ion batteries10.1021/jp201691g ↗
28. Enhanced stability of SnSb/graphene anode through alternative binder and electrolyte additive for lithium ion batteries application10.1016/j.jpowsour.2015.06.065 ↗
29. Investigation on the part played by the solid electrolyte interphase on the electrochemical performances of the silicon electrode for lithium-ion batteries10.1016/j.jpowsour.2012.01.095 ↗
30. Investigation of the Solid electrolyte interphase formed by fluoroethylene carbonate on Si electrodes10.1149/1.3589300 ↗
31. Effect of fluoroethylene carbonate additive on interfacial properties of silicon thin-film electrode10.1016/j.jpowsour.2006.05.049 ↗
32. Effect of vinylene carbonate (VC) as electrolyte additive on electrochemical performance of Si film anode for lithium ion batteries10.1016/j.jpowsour.2007.06.149 ↗
33. Layered lithium insertion material of LiCo 1/3 Ni 1/3 Mn 1/3 O 2 for lithium-ion batteries10.1246/cl.2001.642 ↗
34. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
35. Colloidal processing of silicon nitride with poly(acrylic acid): II, rheological properties10.1111/j.1151-2916.1998.tb02638.x ↗
36. The effects of pristine and carboxylated multi-walled carbon nanotubes as conductive additives on the performance of LiNi 0.33Co 0.33Mn 0.33O 2 and LiFePO 4 positive electrodes10.1016/j.electacta.2012.05.127 ↗
37. Understanding the degradation of silicon electrodes for lithium-ion batteries using acoustic emission10.1149/1.3489374 ↗
38. The design of a Li-ion full cell battery using a nano silicon and nano multi-layer graphene composite anode10.1016/j.jpowsour.2013.10.087 ↗
39. Understanding interfacial chemistry and stability for performance improvement and fade of high-energy Li-ion battery of LiNi0.5Co0.2Mn0.3O2//silicon-graphite10.1016/j.jpowsour.2015.10.089 ↗
40. Performance of full cells containing carbonate-based LiFSI electrolytes and silicon-graphite negative electrodes10.1149/2.0981602jes ↗
41. Studies of the capacity fade mechanisms of LiCoO 2/Si-alloy: graphite cells10.1149/2.0191607jes ↗
42. Consumption of fluoroethylene carbonate (FEC) on Si-C composite electrodes for Li-ion batteries10.1149/2.0951608jes ↗